[1970-Jan-01 00:01:28.090661]: Loading settings from string... [1970-Jan-01 00:01:28.359125]: Parsing toolhead settings for bronx... [1970-Jan-01 00:01:28.420880]: Rebuilding toolhead structure [1970-Jan-01 00:01:28.458217]: Building bronx location 0... [1970-Jan-01 00:01:28.609701]: Initialization: heater settings [1970-Jan-01 00:01:28.621878]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C [1970-Jan-01 00:01:28.640825]: Settings: Parsing home subtree... [1970-Jan-01 00:01:28.665826]: Init endstop for axis: 0, type: load_sense, polarity: false [1970-Jan-01 00:01:28.667753]: Init endstop for axis: 1, type: load_sense, polarity: false [1970-Jan-01 00:01:28.669524]: Init endstop for axis: 2, type: switch, polarity: true [1970-Jan-01 00:01:28.699953]: Parsing root settings... [1970-Jan-01 00:01:28.761063]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732 [1970-Jan-01 00:01:28.782129]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732 [1970-Jan-01 00:01:28.783944]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400 [1970-Jan-01 00:01:28.785721]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55 [1970-Jan-01 00:01:28.787633]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 2 30 0 [1970-Jan-01 00:01:28.789863]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 30 0 [1970-Jan-01 00:01:28.802330]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0 [1970-Jan-01 00:01:28.804494]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31 [1970-Jan-01 00:01:28.806895]: syncing set to true [1970-Jan-01 00:01:28.855353]: Axis count unspecified, defaulting to 4 [1970-Jan-01 00:01:28.893171]: Loading capacitor model settings for extruder 0 [1970-Jan-01 00:01:28.896620]: Have 1 valid ToolheadManager pointers, 0 is 0x1df888 [1970-Jan-01 00:01:29.029727]: setting driver address to 22 [1970-Jan-01 00:01:32.390816]: Init step: 0 [1970-Jan-01 00:01:32.450841]: Reset Toolhead Program State [1970-Jan-01 00:01:32.452617]: Toolhead programmer: Resetting [1970-Jan-01 00:01:32.454243]: done [1970-Jan-01 00:01:33.494546]: Init step: 1 [1970-Jan-01 00:01:33.511990]: done [1970-Jan-01 00:01:33.996576]: Init step: 2 [1970-Jan-01 00:01:33.998293]: done [1970-Jan-01 00:01:34.498799]: Init step: 3 [1970-Jan-01 00:01:34.647914]: done [1970-Jan-01 00:01:35.011270]: Init step: 4 [1970-Jan-01 00:01:35.027991]: done [1970-Jan-01 00:01:35.503211]: Init step: 5 [1970-Jan-01 00:01:35.520459]: done [1970-Jan-01 00:01:36.005547]: Init step: 5 [1970-Jan-01 00:01:36.107556]: done [1970-Jan-01 00:01:36.514166]: Init step: 5 [1970-Jan-01 00:01:36.578816]: done [1970-Jan-01 00:01:37.026673]: Init step: 5 [1970-Jan-01 00:01:37.028558]: done [1970-Jan-01 00:01:37.528501]: Init step: 5 [1970-Jan-01 00:01:37.534542]: done [1970-Jan-01 00:01:38.041394]: Init step: 5 [1970-Jan-01 00:01:38.143448]: done [1970-Jan-01 00:01:38.533311]: Init step: 5 [1970-Jan-01 00:01:38.540958]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b Packet CRC: 0x0 [1970-Jan-01 00:01:38.542837]: Toolhead 0 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Jan-01 00:01:38.551040]: done [1970-Jan-01 00:01:39.045788]: Init step: 5 [1970-Jan-01 00:01:39.051430]: done [1970-Jan-01 00:01:39.547860]: Init step: 5 [1970-Jan-01 00:01:39.561511]: done [1970-Jan-01 00:01:40.049552]: Init step: 5 [1970-Jan-01 00:01:40.161116]: done [1970-Jan-01 00:01:40.552048]: Init step: 5 [1970-Jan-01 00:01:40.560922]: Got valid API version 6 for Toolhead 0 [1970-Jan-01 00:01:40.581333]: done [1970-Jan-01 00:01:41.064580]: Init step: 5 [1970-Jan-01 00:01:41.070472]: done [1970-Jan-01 00:01:41.567441]: Init step: 5 [1970-Jan-01 00:01:41.669483]: done [1970-Jan-01 00:01:42.068443]: Init step: 5 [1970-Jan-01 00:01:42.079260]: Toolhead 0: Toolhead has Firmware version 1.7,736 [1970-Jan-01 00:01:42.081409]: Toolhead 0 initialized [1970-Jan-01 00:01:42.083078]: done [1970-Jan-01 00:01:42.581619]: Init step: 6 [1970-Jan-01 00:01:42.583320]: done [1970-Jan-01 00:01:43.073725]: Init step: 7 [1970-Jan-01 00:01:43.076187]: done [1970-Jan-01 00:01:43.591753]: bronx lowest mem space: 0x382 bytes [1970-Jan-01 00:01:43.593453]: Checking tool eeprom version [1970-Jan-01 00:01:43.595200]: Commanding tool usage stat retrieve [1970-Jan-01 00:01:43.596910]: New tool uid 0x9831 attached, updating info cache [1970-Jan-01 00:01:43.612675]: Connected tool has eepromv4 [1970-Jan-01 00:01:43.622680]: Raw usage stats: retract 2575794492ct, extrusion 139182223 steps, 648068 seconds, refurbed 0 times [1970-Jan-01 00:01:43.624466]: Steps/mm not configured, tool usage logging will be wrong! [1970-Jan-01 00:01:43.629819]: PRU Event: PRU_INIT [1970-Jan-01 00:01:53.023219]: bronx lowest mem space: 0x37a bytes [1970-Jan-01 00:02:30.244284]: GetCachedToolUsageStats called [1970-Jan-01 00:04:02.249159]: bronx lowest mem space: 0x376 bytes [1970-Jan-01 19:45:30.033373]: TH0: 2 failures in last 65536 packets (0.00305176%) [1970-Jan-01 23:39:39.339534]: bronx lowest mem space: 0x372 bytes [1970-Jan-02 00:06:09.760890]: bronx lowest mem space: 0x36a bytes [1970-Jan-23 22:05:16.724655]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-23 22:05:16.726430]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:05:17.440702]: bronx lowest mem space: 0x352 bytes [1970-Jan-23 22:05:18.083665]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-23 22:05:18.085773]: Load Sense Limit Method: 1 [1970-Jan-23 22:05:18.100824]: Last sync period had (0,0,11800608) buffer fulls due to suspend moves [1970-Jan-23 22:05:18.102599]: Libstepper All Axis Abort [1970-Jan-23 22:05:22.449319]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:24.701164]: HOME: 1 homing: Limit Detected!: [1970-Jan-23 22:05:24.703753]: Toolhead Abort [1970-Jan-23 22:05:24.705439]: aborting pru with shutdown=true [1970-Jan-23 22:05:24.707923]: Last sync period had (0,0,11801025) buffer fulls due to suspend moves [1970-Jan-23 22:05:24.709779]: Libstepper All Axis Abort [1970-Jan-23 22:05:24.741593]: HOME: 1 homing: Limit Detected!: [1970-Jan-23 22:05:26.917470]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Jan-23 22:05:26.919496]: Load Sense Limit Method: 0 [1970-Jan-23 22:05:26.922290]: Last sync period had (0,0,11801181) buffer fulls due to suspend moves [1970-Jan-23 22:05:26.924143]: Libstepper All Axis Abort [1970-Jan-23 22:05:28.237855]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:32.483920]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:37.771486]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:41.014207]: HOME: 0 homing: Limit Detected!: [1970-Jan-23 22:05:41.016018]: Toolhead Abort [1970-Jan-23 22:05:41.017848]: aborting pru with shutdown=true [1970-Jan-23 22:05:41.020497]: Last sync period had (0,0,11802144) buffer fulls due to suspend moves [1970-Jan-23 22:05:41.023058]: Libstepper All Axis Abort [1970-Jan-23 22:05:41.055099]: HOME: 0 homing: Limit Detected!: [1970-Jan-23 22:05:42.764893]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:43.788469]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Jan-23 22:05:47.395964]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:51.029978]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:54.721216]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:05:58.931581]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:02.642280]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:05.424298]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 22:06:05.426182]: Toolhead Abort [1970-Jan-23 22:06:05.427897]: aborting pru with shutdown=false [1970-Jan-23 22:06:05.430482]: Last sync period had (0,0,11804103) buffer fulls due to suspend moves [1970-Jan-23 22:06:05.432226]: Libstepper All Axis Abort [1970-Jan-23 22:06:05.476814]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 22:06:06.100678]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Jan-23 22:06:06.349263]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:06.584889]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:06.807154]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:07.028547]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:07.258687]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:07.502268]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:07.737936]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:07.951261]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:08.191183]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:08.433274]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:08.667322]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Jan-23 22:06:08.679827]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:09.442215]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:09.688285]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:09.911377]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:10.146171]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:06:10.151551]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 22:06:10.153341]: Toolhead Abort [1970-Jan-23 22:06:10.155016]: aborting pru with shutdown=false [1970-Jan-23 22:06:10.157657]: Last sync period had (0,0,11804175) buffer fulls due to suspend moves [1970-Jan-23 22:06:10.159390]: Libstepper All Axis Abort [1970-Jan-23 22:06:10.195687]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 22:06:10.419200]: GAP: Query->Await [1970-Jan-23 22:06:10.433281]: TH0: Retreived step position 6226191 [1970-Jan-23 22:06:10.450276]: wait for PRU status in get position [1970-Jan-23 22:06:10.451957]: wait for PRU status in get position [1970-Jan-23 22:06:10.453563]: GAP: Await->Done(Query) [1970-Jan-23 22:06:10.650202]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-23 22:06:10.651978]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:06:11.425997]: Expecting 70552.3 steps extruded this print from 649.952 mm of plastic [1970-Jan-23 22:06:11.597771]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 22:06:11.599555]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:06:11.675222]: Expected packet id: 0xf7, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Jan-23 22:06:11.677917]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 22:06:11.682412]: Expected packet id: 0xf7, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Jan-23 22:06:11.684418]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-23 22:06:11.688842]: Expected packet id: 0xf7, Got packet id: 0xf6, Full packet: 0xf3,0x0,0x0,0x21,0x0,0x60,0x0,0xf,0x0,0x0,0x1,0x0,0xb4,0x0,0x0,0x98,0x31,0x3,0x52,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf6,0x61,0xe9,0x90,0xcd, [1970-Jan-23 22:06:11.690980]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 3 [1970-Jan-23 22:06:11.696084]: Toolhead 0: Unsupported Command [1970-Jan-23 22:06:11.697764]: bronx lowest mem space: 0x34a bytes [1970-Jan-23 22:06:11.757306]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 22:08:34.335062]: Expend Buffer: false [1970-Jan-23 22:08:34.485687]: Syncing turned true [1970-Jan-23 22:08:34.552140]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 22:08:34.553832]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 22:08:35.248815]: Toolhead 0 ADC Error: 1 [1970-Jan-23 22:08:35.463821]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 22:08:35.465648]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 22:08:35.467340]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 22:08:35.469007]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 22:08:35.470995]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 22:08:35.472835]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 22:08:41.036117]: Toolhead 0 state error: 81 [1970-Jan-23 22:08:42.599587]: toolhead pausing [1970-Jan-23 22:08:42.601547]: Toolhead 0 : Retry: Waited 1.55993s from state change [1970-Jan-23 22:08:42.606254]: Last sync period had (0,474,1332) buffer fulls due to suspend moves [1970-Jan-23 22:08:42.607994]: Syncing turned false [1970-Jan-23 22:08:42.609769]: quack pause: true [1970-Jan-23 22:08:42.683163]: Toolhead 0 state error: 0 [1970-Jan-23 22:08:42.763567]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 22:08:42.972904]: Last sync period had (0,474,1332) buffer fulls due to suspend moves [1970-Jan-23 22:08:42.975152]: Libstepper All Axis Abort [1970-Jan-23 22:08:42.976859]: Clear Toolhead Buffer [1970-Jan-23 22:08:43.011855]: clear toolhead buffer acknowledged [1970-Jan-23 22:08:43.086216]: toolhead unpausing [1970-Jan-23 22:08:43.087882]: quack pause: false [1970-Jan-23 22:08:43.206553]: Expend Buffer: true [1970-Jan-23 22:08:43.284898]: Last sync period had (0,474,1347) buffer fulls due to suspend moves [1970-Jan-23 22:08:43.286686]: Syncing turned false [1970-Jan-23 22:08:43.365963]: Toolhead 0 ADC Error: 0 [1970-Jan-23 22:08:43.406834]: GAP: Query->Await [1970-Jan-23 22:08:43.428385]: TH0: Retreived step position 14221583 [1970-Jan-23 22:08:43.525197]: wait for PRU status in get position [1970-Jan-23 22:08:43.526848]: wait for PRU status in get position [1970-Jan-23 22:08:43.528436]: GAP: Await->Done(Query) [1970-Jan-23 22:08:43.667284]: Suspend [1970-Jan-23 22:08:43.682155]: Suspend index 33 found, A-pos 11.3957 [1970-Jan-23 22:08:45.520710]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:08:48.671751]: GAP: Query->Await [1970-Jan-23 22:08:48.715183]: TH0: Retreived step position 14287119 [1970-Jan-23 22:08:48.822858]: wait for PRU status in get position [1970-Jan-23 22:08:48.841050]: GAP: Await->Done(Query) [1970-Jan-23 22:08:49.888234]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 22:08:49.889975]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:08:50.386703]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 22:08:53.999318]: Expend Buffer: false [1970-Jan-23 22:08:54.073617]: Syncing turned true [1970-Jan-23 22:08:54.144355]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 22:08:54.146064]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 22:08:54.623493]: Toolhead 0 ADC Error: 1 [1970-Jan-23 22:08:55.463775]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 22:08:55.465473]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 22:08:55.467332]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 22:08:55.473267]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 22:08:55.474964]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 22:08:55.476632]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 22:08:56.338243]: Expend Buffer: false [1970-Jan-23 22:09:11.895875]: Toolhead 0 state error: 81 [1970-Jan-23 22:09:13.552853]: toolhead pausing [1970-Jan-23 22:09:13.554772]: Toolhead 0 : Retry: Waited 1.63544s from state change [1970-Jan-23 22:09:13.559305]: Last sync period had (0,510,1305) buffer fulls due to suspend moves [1970-Jan-23 22:09:13.561432]: Syncing turned false [1970-Jan-23 22:09:13.563087]: quack pause: true [1970-Jan-23 22:09:13.647491]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 22:09:13.840468]: Last sync period had (0,510,1305) buffer fulls due to suspend moves [1970-Jan-23 22:09:13.843130]: Libstepper All Axis Abort [1970-Jan-23 22:09:13.844847]: Clear Toolhead Buffer [1970-Jan-23 22:09:13.872778]: Toolhead 0 state error: 0 [1970-Jan-23 22:09:13.874597]: clear toolhead buffer acknowledged [1970-Jan-23 22:09:13.959346]: toolhead unpausing [1970-Jan-23 22:09:13.971348]: quack pause: false [1970-Jan-23 22:09:14.116133]: Expend Buffer: true [1970-Jan-23 22:09:14.159517]: Last sync period had (0,510,1320) buffer fulls due to suspend moves [1970-Jan-23 22:09:14.181627]: Syncing turned false [1970-Jan-23 22:09:14.287324]: Toolhead 0 ADC Error: 0 [1970-Jan-23 22:09:14.384203]: GAP: Query->Await [1970-Jan-23 22:09:14.423289]: TH0: Retreived step position 14090511 [1970-Jan-23 22:09:14.456646]: wait for PRU status in get position [1970-Jan-23 22:09:14.458413]: wait for PRU status in get position [1970-Jan-23 22:09:14.469261]: GAP: Await->Done(Query) [1970-Jan-23 22:09:14.670436]: Suspend [1970-Jan-23 22:09:14.672544]: Suspend index 59 found, A-pos 23.4018 [1970-Jan-23 22:09:16.101213]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:09:19.402021]: GAP: Query->Await [1970-Jan-23 22:09:19.419748]: TH0: Retreived step position 13959439 [1970-Jan-23 22:09:19.464460]: wait for PRU status in get position [1970-Jan-23 22:09:19.466111]: wait for PRU status in get position [1970-Jan-23 22:09:19.467880]: GAP: Await->Done(Query) [1970-Jan-23 22:09:20.223078]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 22:09:20.224836]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:09:20.725787]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 22:09:24.858984]: Expend Buffer: false [1970-Jan-23 22:09:24.923477]: Syncing turned true [1970-Jan-23 22:09:24.950672]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 22:09:24.952363]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 22:09:25.361416]: Toolhead 0 ADC Error: 1 [1970-Jan-23 22:09:26.150630]: Expected packet id: 0x9e, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x14,0xae,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a, [1970-Jan-23 22:09:26.152531]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 22:09:26.191821]: Expected packet id: 0xa1, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x14,0xae,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a, [1970-Jan-23 22:09:26.193715]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 22:09:26.325463]: Expected packet id: 0xac, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd2,0x0,0xf,0x14,0xae,0x1,0x0,0xd7,0x0,0x0,0x98, [1970-Jan-23 22:09:26.327354]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 22:09:26.457525]: Expected packet id: 0xba, Got packet id: 0xd7, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x14,0xae,0x1,0x0,0xd7,0x0,0x0,0x98,0x31, [1970-Jan-23 22:09:26.459404]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 22:09:26.511855]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 22:09:26.513639]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 22:09:26.515442]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 22:09:26.517106]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 22:09:26.518767]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 22:09:26.540428]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 22:09:27.694393]: Expend Buffer: false [1970-Jan-23 22:09:42.033434]: Toolhead 0 state error: 81 [1970-Jan-23 22:09:43.660428]: toolhead pausing [1970-Jan-23 22:09:43.662279]: Toolhead 0 : Retry: Waited 1.54977s from state change [1970-Jan-23 22:09:43.666805]: Last sync period had (0,546,1275) buffer fulls due to suspend moves [1970-Jan-23 22:09:43.668566]: Syncing turned false [1970-Jan-23 22:09:43.670824]: quack pause: true [1970-Jan-23 22:09:43.785977]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 22:09:43.819328]: axis running: 0 [1970-Jan-23 22:09:43.968873]: axis running: 0 [1970-Jan-23 22:09:44.005588]: Toolhead 0 state error: 0 [1970-Jan-23 22:09:44.130819]: Last sync period had (0,546,1275) buffer fulls due to suspend moves [1970-Jan-23 22:09:44.133023]: Libstepper All Axis Abort [1970-Jan-23 22:09:44.134838]: Clear Toolhead Buffer [1970-Jan-23 22:09:44.172681]: clear toolhead buffer acknowledged [1970-Jan-23 22:09:44.257989]: toolhead unpausing [1970-Jan-23 22:09:44.259652]: quack pause: false [1970-Jan-23 22:09:44.363228]: Expend Buffer: true [1970-Jan-23 22:09:44.413352]: Last sync period had (0,546,1290) buffer fulls due to suspend moves [1970-Jan-23 22:09:44.415151]: Syncing turned false [1970-Jan-23 22:09:44.513471]: Toolhead 0 ADC Error: 0 [1970-Jan-23 22:09:44.588162]: GAP: Query->Await [1970-Jan-23 22:09:44.620393]: TH0: Retreived step position 14024975 [1970-Jan-23 22:09:44.649409]: wait for PRU status in get position [1970-Jan-23 22:09:44.661565]: wait for PRU status in get position [1970-Jan-23 22:09:44.663206]: GAP: Await->Done(Query) [1970-Jan-23 22:09:44.781424]: Suspend [1970-Jan-23 22:09:44.783699]: Suspend index 91 found, A-pos 36.0211 [1970-Jan-23 22:09:45.054351]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:09:49.715231]: GAP: Query->Await [1970-Jan-23 22:09:49.752813]: TH0: Retreived step position 14090511 [1970-Jan-23 22:09:49.786363]: wait for PRU status in get position [1970-Jan-23 22:09:49.788133]: wait for PRU status in get position [1970-Jan-23 22:09:49.789745]: GAP: Await->Done(Query) [1970-Jan-23 22:09:50.560699]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 22:09:50.562457]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:09:51.050917]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 22:09:54.596354]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:09:55.164083]: Expend Buffer: false [1970-Jan-23 22:09:55.222412]: Syncing turned true [1970-Jan-23 22:09:55.267058]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 22:09:55.268903]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 22:09:55.702282]: Toolhead 0 ADC Error: 1 [1970-Jan-23 22:09:56.544805]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 22:09:56.546515]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 22:09:56.548174]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 22:09:56.549836]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 22:09:56.552372]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 22:09:56.554032]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 22:09:57.502699]: Expend Buffer: false [1970-Jan-23 22:10:12.543092]: Toolhead 0 state error: 81 [1970-Jan-23 22:10:14.074696]: toolhead pausing [1970-Jan-23 22:10:14.076565]: Toolhead 0 : Retry: Waited 1.52774s from state change [1970-Jan-23 22:10:14.081196]: Last sync period had (0,483,1374) buffer fulls due to suspend moves [1970-Jan-23 22:10:14.083084]: Syncing turned false [1970-Jan-23 22:10:14.084714]: quack pause: true [1970-Jan-23 22:10:14.213077]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 22:10:14.450463]: Last sync period had (0,483,1374) buffer fulls due to suspend moves [1970-Jan-23 22:10:14.452802]: Libstepper All Axis Abort [1970-Jan-23 22:10:14.454512]: Clear Toolhead Buffer [1970-Jan-23 22:10:14.472737]: clear toolhead buffer acknowledged [1970-Jan-23 22:10:14.558588]: toolhead unpausing [1970-Jan-23 22:10:14.570625]: quack pause: false [1970-Jan-23 22:10:14.693097]: Expend Buffer: true [1970-Jan-23 22:10:14.756149]: Last sync period had (0,483,1389) buffer fulls due to suspend moves [1970-Jan-23 22:10:14.757973]: Syncing turned false [1970-Jan-23 22:10:14.785261]: Toolhead 0 state error: 0 [1970-Jan-23 22:10:14.845469]: Toolhead 0 ADC Error: 0 [1970-Jan-23 22:10:14.885869]: GAP: Query->Await [1970-Jan-23 22:10:14.922812]: TH0: Retreived step position 14287119 [1970-Jan-23 22:10:15.005322]: wait for PRU status in get position [1970-Jan-23 22:10:15.006966]: wait for PRU status in get position [1970-Jan-23 22:10:15.008580]: GAP: Await->Done(Query) [1970-Jan-23 22:10:15.129087]: Suspend [1970-Jan-23 22:10:15.138031]: Suspend index 123 found, A-pos 47.8594 [1970-Jan-23 22:10:19.023977]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:10:19.899041]: GAP: Query->Await [1970-Jan-23 22:10:19.921027]: TH0: Retreived step position 14156047 [1970-Jan-23 22:10:19.954226]: wait for PRU status in get position [1970-Jan-23 22:10:19.955863]: wait for PRU status in get position [1970-Jan-23 22:10:19.957613]: GAP: Await->Done(Query) [1970-Jan-23 22:12:56.529657]: Toolhead 0 state error: 56 [1970-Jan-23 22:12:57.778777]: Toolhead 0 state error: 0 [1970-Jan-23 22:24:15.744408]: toolhead pausing [1970-Jan-23 22:24:15.762041]: Last sync period had (0,483,11748) buffer fulls due to suspend moves [1970-Jan-23 22:24:15.763926]: Syncing turned false [1970-Jan-23 22:24:15.765581]: quack pause: true [1970-Jan-23 22:24:16.022822]: Last sync period had (0,483,11757) buffer fulls due to suspend moves [1970-Jan-23 22:24:16.024656]: Libstepper All Axis Abort [1970-Jan-23 22:24:16.026453]: Clear Toolhead Buffer [1970-Jan-23 22:24:16.078857]: clear toolhead buffer acknowledged [1970-Jan-23 22:24:16.235672]: toolhead unpausing [1970-Jan-23 22:24:16.237482]: quack pause: false [1970-Jan-23 22:24:16.544468]: Expend Buffer: true [1970-Jan-23 22:24:16.844511]: Last sync period had (0,483,11775) buffer fulls due to suspend moves [1970-Jan-23 22:24:16.846314]: Syncing turned false [1970-Jan-23 22:24:17.019996]: GAP: Query->Await [1970-Jan-23 22:24:17.052903]: TH0: Retreived step position 2294031 [1970-Jan-23 22:24:17.087946]: wait for PRU status in get position [1970-Jan-23 22:24:17.089601]: wait for PRU status in get position [1970-Jan-23 22:24:17.091438]: GAP: Await->Done(Query) [1970-Jan-23 22:24:17.287322]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-23 22:24:17.301245]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:24:21.623639]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 22:24:26.685147]: Last sync period had (0,483,12357) buffer fulls due to suspend moves [1970-Jan-23 22:24:26.687765]: Syncing turned false [1970-Jan-23 22:24:26.694683]: TH0: 86 failures in last 3588 packets (2.39688%) [1970-Jan-23 22:24:26.696605]: Toolhead Abort [1970-Jan-23 22:24:26.698264]: aborting pru with shutdown=true [1970-Jan-23 22:24:26.701090]: Last sync period had (0,483,12357) buffer fulls due to suspend moves [1970-Jan-23 22:24:26.702820]: Libstepper All Axis Abort [1970-Jan-23 22:24:26.704724]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-23 22:24:26.706397]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:24:26.831653]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-23 22:24:26.833467]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:24:26.921154]: Commanding stats update: Retract count: 2575794498 [1970-Jan-23 22:24:26.922871]: Toolhead 0 marked as possibly blocking! [1970-Jan-23 22:24:27.532319]: Toolhead 0 done blocking! [1970-Jan-23 22:24:27.682837]: GetToolUsageStats called in machine state 0 [1970-Jan-23 22:24:27.691542]: Commanding tool usage stat retrieve [1970-Jan-23 22:24:27.693353]: GetToolUsageState: Proceeds to 1 [1970-Jan-23 22:24:27.694944]: GetToolUsagState: Error from retrieve: 0x10a [1970-Jan-23 22:24:27.798241]: Raw usage stats: retract 856621694ct, extrusion 139199126 steps, 648105 seconds, refurbed 0 times [1970-Jan-23 22:24:27.989270]: GetToolUsageStats called in machine state 1 [1970-Jan-23 22:24:28.001358]: VerifyToolUsageStatsRetrieved: Done [1970-Jan-23 22:24:28.002969]: GetToolUsageState: Proceeds to 2 [1970-Jan-23 22:24:28.146689]: GetToolUsageStats called in machine state 2 [1970-Jan-23 22:24:28.148552]: GetToolUsageState: Done, resets [1970-Jan-23 22:31:23.056768]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-23 22:31:23.058516]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:31:24.300652]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 22:31:24.388016]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-23 22:31:24.389952]: Load Sense Limit Method: 1 [1970-Jan-23 22:31:24.403129]: Last sync period had (0,483,14931) buffer fulls due to suspend moves [1970-Jan-23 22:31:24.404884]: Libstepper All Axis Abort [1970-Jan-23 22:31:26.823069]: Last sync period had (0,483,15069) buffer fulls due to suspend moves [1970-Jan-23 22:31:26.824835]: Syncing turned false [1970-Jan-23 22:31:26.826700]: Toolhead Abort [1970-Jan-23 22:31:26.828413]: aborting pru with shutdown=true [1970-Jan-23 22:31:26.841326]: Last sync period had (0,483,15069) buffer fulls due to suspend moves [1970-Jan-23 22:31:26.843116]: Libstepper All Axis Abort [1970-Jan-23 22:31:26.845545]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-23 22:31:26.847237]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:31:28.911157]: Last sync period had (0,483,15090) buffer fulls due to suspend moves [1970-Jan-23 22:31:28.913763]: Syncing turned false [1970-Jan-23 22:31:28.915514]: Toolhead Abort [1970-Jan-23 22:31:28.917222]: aborting pru with shutdown=true [1970-Jan-23 22:31:28.930860]: Last sync period had (0,483,15090) buffer fulls due to suspend moves [1970-Jan-23 22:31:28.932651]: Libstepper All Axis Abort [1970-Jan-23 22:31:28.934396]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-23 22:31:28.936109]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:31:29.057409]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-23 22:31:29.059191]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 22:31:29.159038]: Commanding stats update: Retract count: 856621694 [1970-Jan-23 22:31:29.161007]: Toolhead 0 marked as possibly blocking! [1970-Jan-23 22:31:29.752770]: Toolhead 0 done blocking! [1970-Jan-23 22:31:29.879360]: GetToolUsageStats called in machine state 0 [1970-Jan-23 22:31:29.891457]: Commanding tool usage stat retrieve [1970-Jan-23 22:31:29.893115]: GetToolUsageState: Proceeds to 1 [1970-Jan-23 22:31:29.894854]: GetToolUsagState: Error from retrieve: 0x10a [1970-Jan-23 22:31:29.928930]: Raw usage stats: retract 1713243388ct, extrusion 139199126 steps, 648105 seconds, refurbed 0 times [1970-Jan-23 22:31:30.002231]: GetToolUsageStats called in machine state 1 [1970-Jan-23 22:31:30.003963]: VerifyToolUsageStatsRetrieved: Done [1970-Jan-23 22:31:30.005572]: GetToolUsageState: Proceeds to 2 [1970-Jan-23 22:31:30.064180]: GetToolUsageStats called in machine state 2 [1970-Jan-23 22:31:30.066730]: GetToolUsageState: Done, resets [1970-Jan-23 23:09:46.649561]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-23 23:09:46.662686]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 23:09:47.899968]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-23 23:09:47.902429]: Load Sense Limit Method: 1 [1970-Jan-23 23:09:47.905860]: Last sync period had (0,483,29112) buffer fulls due to suspend moves [1970-Jan-23 23:09:47.907663]: Libstepper All Axis Abort [1970-Jan-23 23:09:51.125747]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:09:52.684409]: HOME: 1 homing: Limit Detected!: [1970-Jan-23 23:09:52.686218]: Toolhead Abort [1970-Jan-23 23:09:52.688125]: aborting pru with shutdown=true [1970-Jan-23 23:09:52.690771]: Last sync period had (0,483,29352) buffer fulls due to suspend moves [1970-Jan-23 23:09:52.692511]: Libstepper All Axis Abort [1970-Jan-23 23:09:52.733035]: HOME: 1 homing: Limit Detected!: [1970-Jan-23 23:09:54.568332]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Jan-23 23:09:54.570523]: Load Sense Limit Method: 0 [1970-Jan-23 23:09:54.573112]: Last sync period had (0,483,29466) buffer fulls due to suspend moves [1970-Jan-23 23:09:54.575869]: Libstepper All Axis Abort [1970-Jan-23 23:09:57.143647]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:03.210635]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:08.310903]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:08.672009]: HOME: 0 homing: Limit Detected!: [1970-Jan-23 23:10:08.674595]: Toolhead Abort [1970-Jan-23 23:10:08.676315]: aborting pru with shutdown=true [1970-Jan-23 23:10:08.678837]: Last sync period had (0,483,30285) buffer fulls due to suspend moves [1970-Jan-23 23:10:08.680930]: Libstepper All Axis Abort [1970-Jan-23 23:10:08.728789]: HOME: 0 homing: Limit Detected!: [1970-Jan-23 23:10:11.455699]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Jan-23 23:10:14.552011]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:18.933135]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:24.154117]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:28.497715]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:32.814810]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:33.162939]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 23:10:33.164737]: Toolhead Abort [1970-Jan-23 23:10:33.166567]: aborting pru with shutdown=false [1970-Jan-23 23:10:33.180914]: Last sync period had (0,483,31932) buffer fulls due to suspend moves [1970-Jan-23 23:10:33.182674]: Libstepper All Axis Abort [1970-Jan-23 23:10:33.224557]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 23:10:33.939721]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Jan-23 23:10:34.455523]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:35.372098]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:35.703611]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:35.973032]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:36.237075]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:36.511139]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:36.799088]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:37.064857]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:37.332791]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:10:37.380785]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 23:10:37.382586]: Toolhead Abort [1970-Jan-23 23:10:37.384424]: aborting pru with shutdown=false [1970-Jan-23 23:10:37.390923]: Last sync period had (0,483,32001) buffer fulls due to suspend moves [1970-Jan-23 23:10:37.392695]: Libstepper All Axis Abort [1970-Jan-23 23:10:37.464704]: HOME: 2 homing: Limit Detected!: [1970-Jan-23 23:10:37.671869]: GAP: Query->Await [1970-Jan-23 23:10:37.684873]: TH0: Retreived step position 6095119 [1970-Jan-23 23:10:37.702541]: wait for PRU status in get position [1970-Jan-23 23:10:37.711139]: wait for PRU status in get position [1970-Jan-23 23:10:37.712792]: GAP: Await->Done(Query) [1970-Jan-23 23:10:37.933847]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-23 23:10:37.935721]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 23:10:38.761315]: Expecting 1.23016e+06 steps extruded this print from 11332.6 mm of plastic [1970-Jan-23 23:10:38.939056]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 23:10:38.941179]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 23:10:39.050965]: Expected packet id: 0x35, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Jan-23 23:10:39.052876]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:10:39.057552]: Expected packet id: 0x35, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Jan-23 23:10:39.059467]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-23 23:10:39.071100]: Expected packet id: 0x35, Got packet id: 0xf3, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x21,0x0, [1970-Jan-23 23:10:39.074099]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 3 [1970-Jan-23 23:10:39.078827]: Toolhead 0: Unsupported Command [1970-Jan-23 23:10:39.134445]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 23:13:01.704753]: Expend Buffer: false [1970-Jan-23 23:13:01.805249]: Syncing turned true [1970-Jan-23 23:13:01.898962]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 23:13:01.900922]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 23:13:02.312564]: Toolhead 0 ADC Error: 1 [1970-Jan-23 23:13:02.529525]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 23:13:02.531548]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 23:13:02.533194]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 23:13:02.534852]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 23:13:02.536860]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 23:13:02.538672]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 23:13:03.132348]: Expected packet id: 0x97, Got packet id: 0xd7, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x1f,0x78,0x1,0x0,0xd7,0x0,0x0,0x98,0x31, [1970-Jan-23 23:13:03.134251]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:13:04.086265]: Expected packet id: 0xe9, Got packet id: 0xe8, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x1f,0x78,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x1e,0x90,0x0,0xe8,0xd7,0x82,0x9c,0xb1, [1970-Jan-23 23:13:04.088157]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:13:04.149694]: Expected packet id: 0xf8, Got packet id: 0xf7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x1f,0x78,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x1a,0x3c,0x0,0xf7,0x5,0x8a,0xa2,0x17, [1970-Jan-23 23:13:04.151783]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:13:09.846344]: Toolhead 0 state error: 81 [1970-Jan-23 23:13:11.478210]: toolhead pausing [1970-Jan-23 23:13:11.480288]: Toolhead 0 : Retry: Waited 1.55211s from state change [1970-Jan-23 23:13:11.484851]: Last sync period had (0,348,1875) buffer fulls due to suspend moves [1970-Jan-23 23:13:11.486716]: Syncing turned false [1970-Jan-23 23:13:11.488346]: quack pause: true [1970-Jan-23 23:13:11.605895]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 23:13:11.708405]: axis running: 0 [1970-Jan-23 23:13:11.779237]: axis running: 0 [1970-Jan-23 23:13:11.808102]: Toolhead 0 state error: 0 [1970-Jan-23 23:13:11.940682]: Last sync period had (0,348,1875) buffer fulls due to suspend moves [1970-Jan-23 23:13:11.943212]: Libstepper All Axis Abort [1970-Jan-23 23:13:11.944906]: Clear Toolhead Buffer [1970-Jan-23 23:13:11.957429]: clear toolhead buffer acknowledged [1970-Jan-23 23:13:12.051479]: toolhead unpausing [1970-Jan-23 23:13:12.053144]: quack pause: false [1970-Jan-23 23:13:12.215180]: Expend Buffer: true [1970-Jan-23 23:13:12.274891]: Last sync period had (0,348,1893) buffer fulls due to suspend moves [1970-Jan-23 23:13:12.276683]: Syncing turned false [1970-Jan-23 23:13:12.351661]: Toolhead 0 ADC Error: 0 [1970-Jan-23 23:13:12.389706]: GAP: Query->Await [1970-Jan-23 23:13:12.421536]: TH0: Retreived step position 14287119 [1970-Jan-23 23:13:12.459964]: wait for PRU status in get position [1970-Jan-23 23:13:12.461807]: wait for PRU status in get position [1970-Jan-23 23:13:12.463411]: GAP: Await->Done(Query) [1970-Jan-23 23:13:12.572154]: Suspend [1970-Jan-23 23:13:12.574200]: Suspend index 29 found, A-pos 17 [1970-Jan-23 23:13:13.355664]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:13:17.419353]: GAP: Query->Await [1970-Jan-23 23:13:17.436734]: TH0: Retreived step position 14352655 [1970-Jan-23 23:13:17.485224]: wait for PRU status in get position [1970-Jan-23 23:13:17.486871]: wait for PRU status in get position [1970-Jan-23 23:13:17.489041]: GAP: Await->Done(Query) [1970-Jan-23 23:13:18.309190]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 23:13:18.311569]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 23:13:18.824623]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 23:13:22.827926]: Expend Buffer: false [1970-Jan-23 23:13:22.883570]: Syncing turned true [1970-Jan-23 23:13:22.928896]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 23:13:22.930799]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 23:13:23.361160]: Toolhead 0 ADC Error: 1 [1970-Jan-23 23:13:24.188182]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 23:13:24.189898]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 23:13:24.193233]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 23:13:24.194896]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 23:13:24.198079]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 23:13:24.199752]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 23:13:25.304475]: Expend Buffer: false [1970-Jan-23 23:13:40.753247]: Toolhead 0 state error: 81 [1970-Jan-23 23:13:42.310849]: toolhead pausing [1970-Jan-23 23:13:42.312564]: Toolhead 0 : Retry: Waited 1.54729s from state change [1970-Jan-23 23:13:42.317203]: Last sync period had (0,300,1527) buffer fulls due to suspend moves [1970-Jan-23 23:13:42.318938]: Syncing turned false [1970-Jan-23 23:13:42.321043]: quack pause: true [1970-Jan-23 23:13:42.413070]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 23:13:42.642235]: Last sync period had (0,300,1527) buffer fulls due to suspend moves [1970-Jan-23 23:13:42.644672]: Libstepper All Axis Abort [1970-Jan-23 23:13:42.646371]: Clear Toolhead Buffer [1970-Jan-23 23:13:42.673301]: clear toolhead buffer acknowledged [1970-Jan-23 23:13:42.758817]: toolhead unpausing [1970-Jan-23 23:13:42.770825]: quack pause: false [1970-Jan-23 23:13:42.884432]: Expend Buffer: true [1970-Jan-23 23:13:42.977175]: Last sync period had (0,300,1545) buffer fulls due to suspend moves [1970-Jan-23 23:13:42.978951]: Syncing turned false [1970-Jan-23 23:13:43.011896]: Toolhead 0 state error: 0 [1970-Jan-23 23:13:43.092713]: Toolhead 0 ADC Error: 0 [1970-Jan-23 23:13:43.133637]: GAP: Query->Await [1970-Jan-23 23:13:43.161960]: TH0: Retreived step position 13959439 [1970-Jan-23 23:13:43.186127]: wait for PRU status in get position [1970-Jan-23 23:13:43.187796]: wait for PRU status in get position [1970-Jan-23 23:13:43.189395]: GAP: Await->Done(Query) [1970-Jan-23 23:13:43.304154]: Suspend [1970-Jan-23 23:13:43.306524]: Suspend index 42 found, A-pos 29.2943 [1970-Jan-23 23:13:43.463424]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:13:48.856437]: GAP: Query->Await [1970-Jan-23 23:13:49.050770]: TH0: Retreived step position 13893903 [1970-Jan-23 23:13:49.237325]: wait for PRU status in get position [1970-Jan-23 23:13:49.239049]: wait for PRU status in get position [1970-Jan-23 23:13:49.251334]: GAP: Await->Done(Query) [1970-Jan-23 23:13:50.039217]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 23:13:50.041299]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 23:13:50.551446]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 23:14:02.621159]: Expend Buffer: false [1970-Jan-23 23:14:03.108540]: Syncing turned true [1970-Jan-23 23:14:03.136114]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 23:14:03.138051]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 23:14:03.588378]: Toolhead 0 ADC Error: 1 [1970-Jan-23 23:14:04.377627]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 23:14:04.379358]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 23:14:04.382655]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 23:14:04.384353]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 23:14:04.386012]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 23:14:04.387848]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 23:14:05.227426]: Expend Buffer: false [1970-Jan-23 23:14:22.711980]: Toolhead 0 state error: 81 [1970-Jan-23 23:14:24.256712]: toolhead pausing [1970-Jan-23 23:14:24.258563]: Toolhead 0 : Retry: Waited 1.54482s from state change [1970-Jan-23 23:14:24.263418]: Last sync period had (0,294,1509) buffer fulls due to suspend moves [1970-Jan-23 23:14:24.265291]: Syncing turned false [1970-Jan-23 23:14:24.266913]: quack pause: true [1970-Jan-23 23:14:24.372811]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 23:14:24.600462]: Last sync period had (0,294,1509) buffer fulls due to suspend moves [1970-Jan-23 23:14:24.603549]: Libstepper All Axis Abort [1970-Jan-23 23:14:24.605316]: Clear Toolhead Buffer [1970-Jan-23 23:14:24.627793]: clear toolhead buffer acknowledged [1970-Jan-23 23:14:24.724922]: toolhead unpausing [1970-Jan-23 23:14:24.726712]: quack pause: false [1970-Jan-23 23:14:24.843207]: Expend Buffer: true [1970-Jan-23 23:14:24.955618]: Last sync period had (0,294,1527) buffer fulls due to suspend moves [1970-Jan-23 23:14:24.957419]: Syncing turned false [1970-Jan-23 23:14:24.987690]: Toolhead 0 state error: 0 [1970-Jan-23 23:14:25.032806]: Toolhead 0 ADC Error: 0 [1970-Jan-23 23:14:25.073127]: GAP: Query->Await [1970-Jan-23 23:14:25.115876]: TH0: Retreived step position 14287119 [1970-Jan-23 23:14:25.162167]: wait for PRU status in get position [1970-Jan-23 23:14:25.163838]: wait for PRU status in get position [1970-Jan-23 23:14:25.165447]: GAP: Await->Done(Query) [1970-Jan-23 23:14:25.292418]: Suspend [1970-Jan-23 23:14:25.294306]: Suspend index 55 found, A-pos 40.9741 [1970-Jan-23 23:14:26.984523]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-23 23:14:30.866608]: GAP: Query->Await [1970-Jan-23 23:14:30.902067]: TH0: Retreived step position 14156047 [1970-Jan-23 23:14:30.987310]: wait for PRU status in get position [1970-Jan-23 23:14:30.988977]: wait for PRU status in get position [1970-Jan-23 23:14:31.000905]: GAP: Await->Done(Query) [1970-Jan-23 23:14:31.736411]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-23 23:14:31.741937]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-23 23:14:32.243914]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-23 23:14:35.869549]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:14:36.301365]: Expend Buffer: false [1970-Jan-23 23:14:36.402577]: Syncing turned true [1970-Jan-23 23:14:36.443610]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-23 23:14:36.445312]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-23 23:14:36.854970]: Toolhead 0 ADC Error: 1 [1970-Jan-23 23:14:37.674813]: Expected packet id: 0x82, Got packet id: 0x1, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x30,0xab,0x1,0x0,0xd7,0x0,0x0, [1970-Jan-23 23:14:37.676714]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:14:37.873632]: Expected packet id: 0x96, Got packet id: 0xd7, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x30,0xab,0x1,0x0,0xd7,0x0,0x0,0x98,0x31, [1970-Jan-23 23:14:37.885686]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:14:37.916940]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-23 23:14:37.918639]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-23 23:14:37.945445]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-23 23:14:37.947814]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-23 23:14:37.949565]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-23 23:14:37.956887]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-23 23:14:38.339380]: Expected packet id: 0xbe, Got packet id: 0xd7, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x30,0xab,0x1,0x0,0xd7,0x0,0x0,0x98,0x31, [1970-Jan-23 23:14:38.341493]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:14:38.422488]: Expected packet id: 0xcb, Got packet id: 0xca, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x30,0xab,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x3,0x57,0xcb,0x0,0xca,0x2f,0xaa,0xe9,0xce, [1970-Jan-23 23:14:38.424364]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-23 23:14:39.173501]: Expend Buffer: false [1970-Jan-23 23:14:57.078298]: Toolhead 0 state error: 81 [1970-Jan-23 23:14:58.611723]: toolhead pausing [1970-Jan-23 23:14:58.613445]: Toolhead 0 : Retry: Waited 1.52955s from state change [1970-Jan-23 23:14:58.618083]: Last sync period had (0,297,1518) buffer fulls due to suspend moves [1970-Jan-23 23:14:58.620678]: Syncing turned false [1970-Jan-23 23:14:58.622323]: quack pause: true [1970-Jan-23 23:14:58.751834]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-23 23:14:58.804125]: axis running: 0 [1970-Jan-23 23:14:58.973021]: axis running: 0 [1970-Jan-23 23:14:59.029802]: axis running: 0 [1970-Jan-23 23:14:59.068253]: Toolhead 0 state error: 0 [1970-Jan-23 23:14:59.208656]: Last sync period had (0,297,1518) buffer fulls due to suspend moves [1970-Jan-23 23:14:59.211253]: Libstepper All Axis Abort [1970-Jan-23 23:14:59.212958]: Clear Toolhead Buffer [1970-Jan-23 23:14:59.242844]: clear toolhead buffer acknowledged [1970-Jan-23 23:14:59.334582]: toolhead unpausing [1970-Jan-23 23:14:59.336233]: quack pause: false [1970-Jan-23 23:14:59.499234]: Expend Buffer: true [1970-Jan-23 23:14:59.569070]: Last sync period had (0,297,1536) buffer fulls due to suspend moves [1970-Jan-23 23:14:59.571317]: Syncing turned false [1970-Jan-23 23:14:59.669358]: Toolhead 0 ADC Error: 0 [1970-Jan-23 23:14:59.712421]: GAP: Query->Await [1970-Jan-23 23:14:59.733160]: TH0: Retreived step position 14024975 [1970-Jan-23 23:14:59.773484]: wait for PRU status in get position [1970-Jan-23 23:14:59.775124]: wait for PRU status in get position [1970-Jan-23 23:14:59.776722]: GAP: Await->Done(Query) [1970-Jan-23 23:14:59.906752]: Suspend [1970-Jan-23 23:14:59.908679]: Suspend index 71 found, A-pos 54.2097 [1970-Jan-23 23:15:04.274674]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-23 23:15:05.035991]: GAP: Query->Await [1970-Jan-23 23:15:05.047802]: TH0: Retreived step position 14090511 [1970-Jan-23 23:15:05.067775]: wait for PRU status in get position [1970-Jan-23 23:15:05.069446]: wait for PRU status in get position [1970-Jan-23 23:15:05.071297]: GAP: Await->Done(Query) [1970-Jan-23 23:17:37.976518]: Toolhead 0 state error: 56 [1970-Jan-23 23:17:39.225431]: Toolhead 0 state error: 0 [1970-Jan-24 13:30:25.800767]: TH0: 81 failures in last 65536 packets (0.123596%) [1970-Feb-23 00:37:30.503782]: toolhead pausing [1970-Feb-23 00:37:30.539641]: Last sync period had (0,297,30942732) buffer fulls due to suspend moves [1970-Feb-23 00:37:30.554266]: Syncing turned false [1970-Feb-23 00:37:30.556123]: quack pause: true [1970-Feb-23 00:37:30.911869]: Last sync period had (0,297,30942741) buffer fulls due to suspend moves [1970-Feb-23 00:37:30.913647]: Libstepper All Axis Abort [1970-Feb-23 00:37:30.915477]: Clear Toolhead Buffer [1970-Feb-23 00:37:30.969646]: clear toolhead buffer acknowledged [1970-Feb-23 00:37:31.057326]: toolhead unpausing [1970-Feb-23 00:37:31.059004]: quack pause: false [1970-Feb-23 00:37:31.183367]: Expend Buffer: true [1970-Feb-23 00:37:31.303810]: Last sync period had (0,297,30942759) buffer fulls due to suspend moves [1970-Feb-23 00:37:31.305745]: Syncing turned false [1970-Feb-23 00:37:31.422466]: GAP: Query->Await [1970-Feb-23 00:37:31.445980]: TH0: Retreived step position 1442063 [1970-Feb-23 00:37:31.467970]: wait for PRU status in get position [1970-Feb-23 00:37:31.469630]: wait for PRU status in get position [1970-Feb-23 00:37:31.471492]: GAP: Await->Done(Query) [1970-Feb-23 00:37:31.624560]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:37:31.626459]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:37:36.213085]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:37:41.025087]: Last sync period had (0,297,30943311) buffer fulls due to suspend moves [1970-Feb-23 00:37:41.027079]: Syncing turned false [1970-Feb-23 00:37:41.028845]: Toolhead Abort [1970-Feb-23 00:37:41.030804]: aborting pru with shutdown=true [1970-Feb-23 00:37:41.033485]: Last sync period had (0,297,30943311) buffer fulls due to suspend moves [1970-Feb-23 00:37:41.035226]: Libstepper All Axis Abort [1970-Feb-23 00:37:41.036846]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:37:41.038544]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:37:41.164510]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:37:41.166296]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:37:41.371142]: Commanding stats update: Retract count: 1713243389 [1970-Feb-23 00:37:41.372913]: Toolhead 0 marked as possibly blocking! [1970-Feb-23 00:37:41.971461]: Toolhead 0 done blocking! [1970-Feb-23 00:37:42.111153]: GetToolUsageStats called in machine state 0 [1970-Feb-23 00:37:42.112874]: Commanding tool usage stat retrieve [1970-Feb-23 00:37:42.114647]: GetToolUsageState: Proceeds to 1 [1970-Feb-23 00:37:42.116268]: GetToolUsagState: Error from retrieve: 0x10a [1970-Feb-23 00:37:42.144204]: Raw usage stats: retract 3426486777ct, extrusion 139216739 steps, 648144 seconds, refurbed 0 times [1970-Feb-23 00:37:42.162352]: GetToolUsageStats called in machine state 1 [1970-Feb-23 00:37:42.169209]: VerifyToolUsageStatsRetrieved: Done [1970-Feb-23 00:37:42.171973]: GetToolUsageState: Proceeds to 2 [1970-Feb-23 00:37:42.240494]: GetToolUsageStats called in machine state 2 [1970-Feb-23 00:37:42.242368]: GetToolUsageState: Done, resets [1970-Feb-23 00:39:05.806262]: Heater manager Set Target Temperature to 180, index 0 [1970-Feb-23 00:39:05.808632]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:39:07.069028]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Feb-23 00:39:07.071432]: Load Sense Limit Method: 1 [1970-Feb-23 00:39:07.074126]: Last sync period had (0,297,30943950) buffer fulls due to suspend moves [1970-Feb-23 00:39:07.075948]: Libstepper All Axis Abort [1970-Feb-23 00:39:08.007296]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:13.647540]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:13.696409]: HOME: 1 homing: Limit Detected!: [1970-Feb-23 00:39:13.698376]: Toolhead Abort [1970-Feb-23 00:39:13.704108]: aborting pru with shutdown=true [1970-Feb-23 00:39:13.706975]: Last sync period had (0,297,30944316) buffer fulls due to suspend moves [1970-Feb-23 00:39:13.709041]: Libstepper All Axis Abort [1970-Feb-23 00:39:13.767568]: HOME: 1 homing: Limit Detected!: [1970-Feb-23 00:39:15.853130]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Feb-23 00:39:15.855174]: Load Sense Limit Method: 0 [1970-Feb-23 00:39:15.857862]: Last sync period had (0,297,30944388) buffer fulls due to suspend moves [1970-Feb-23 00:39:15.860599]: Libstepper All Axis Abort [1970-Feb-23 00:39:20.484677]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:25.637996]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:29.961969]: HOME: 0 homing: Limit Detected!: [1970-Feb-23 00:39:29.963811]: Toolhead Abort [1970-Feb-23 00:39:29.965528]: aborting pru with shutdown=true [1970-Feb-23 00:39:29.972778]: Last sync period had (0,297,30945225) buffer fulls due to suspend moves [1970-Feb-23 00:39:29.974552]: Libstepper All Axis Abort [1970-Feb-23 00:39:30.040617]: HOME: 0 homing: Limit Detected!: [1970-Feb-23 00:39:32.113598]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:32.773009]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Feb-23 00:39:36.693181]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:41.885682]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:46.226642]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:51.277245]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:54.402540]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:39:54.404363]: Toolhead Abort [1970-Feb-23 00:39:54.406087]: aborting pru with shutdown=false [1970-Feb-23 00:39:54.408636]: Last sync period had (0,297,30946881) buffer fulls due to suspend moves [1970-Feb-23 00:39:54.410596]: Libstepper All Axis Abort [1970-Feb-23 00:39:54.475013]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:39:55.165800]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Feb-23 00:39:55.478128]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:55.754738]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:56.042123]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:56.309400]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:56.578412]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:56.859777]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:57.129372]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:57.401242]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:57.669161]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:57.939692]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:58.192016]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Feb-23 00:39:58.216514]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:58.485834]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:58.765052]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:39:58.838649]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:39:58.840712]: Toolhead Abort [1970-Feb-23 00:39:58.842617]: aborting pru with shutdown=false [1970-Feb-23 00:39:58.845190]: Last sync period had (0,297,30946950) buffer fulls due to suspend moves [1970-Feb-23 00:39:58.846964]: Libstepper All Axis Abort [1970-Feb-23 00:39:58.913268]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:39:59.157872]: GAP: Query->Await [1970-Feb-23 00:39:59.171278]: TH0: Retreived step position 6226191 [1970-Feb-23 00:39:59.195285]: wait for PRU status in get position [1970-Feb-23 00:39:59.196947]: wait for PRU status in get position [1970-Feb-23 00:39:59.198585]: GAP: Await->Done(Query) [1970-Feb-23 00:39:59.429389]: Heater manager Set Target Temperature to 180, index 0 [1970-Feb-23 00:39:59.431409]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:40:00.512109]: Expecting 806072 steps extruded this print from 7425.81 mm of plastic [1970-Feb-23 00:40:01.036563]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:40:01.038335]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:40:01.290822]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:42:17.469483]: Expend Buffer: false [1970-Feb-23 00:42:17.632205]: Syncing turned true [1970-Feb-23 00:42:17.788385]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:42:17.808578]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:42:18.268250]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:42:18.477627]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:42:18.479489]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:42:18.481385]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:42:18.483106]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:42:18.484767]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:42:18.486561]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:42:18.836034]: Expected packet id: 0xa6, Got packet id: 0xa5, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x36,0x43,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x36,0xb5,0x0,0xa5,0x8f,0x9e,0x12,0x3, [1970-Feb-23 00:42:18.838086]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:42:22.991977]: Toolhead 0 state error: 81 [1970-Feb-23 00:42:24.551945]: toolhead pausing [1970-Feb-23 00:42:24.553692]: Toolhead 0 : Retry: Waited 1.55992s from state change [1970-Feb-23 00:42:24.558704]: Last sync period had (0,147,2073) buffer fulls due to suspend moves [1970-Feb-23 00:42:24.562218]: Syncing turned false [1970-Feb-23 00:42:24.563969]: quack pause: true [1970-Feb-23 00:42:24.636187]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:42:24.676458]: axis running: 0 [1970-Feb-23 00:42:24.836809]: axis running: 0 [1970-Feb-23 00:42:24.910829]: axis running: 0 [1970-Feb-23 00:42:24.973058]: axis running: 0 [1970-Feb-23 00:42:25.030941]: axis running: 0 [1970-Feb-23 00:42:25.119142]: Toolhead 0 state error: 0 [1970-Feb-23 00:42:25.190822]: Last sync period had (0,147,2073) buffer fulls due to suspend moves [1970-Feb-23 00:42:25.193207]: Libstepper All Axis Abort [1970-Feb-23 00:42:25.195050]: Clear Toolhead Buffer [1970-Feb-23 00:42:25.222759]: clear toolhead buffer acknowledged [1970-Feb-23 00:42:25.309306]: toolhead unpausing [1970-Feb-23 00:42:25.321360]: quack pause: false [1970-Feb-23 00:42:25.480525]: Expend Buffer: true [1970-Feb-23 00:42:25.533091]: Last sync period had (0,147,2091) buffer fulls due to suspend moves [1970-Feb-23 00:42:25.534890]: Syncing turned false [1970-Feb-23 00:42:25.619935]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:42:25.661513]: GAP: Query->Await [1970-Feb-23 00:42:25.683306]: TH0: Retreived step position 14221583 [1970-Feb-23 00:42:25.722784]: wait for PRU status in get position [1970-Feb-23 00:42:25.724560]: wait for PRU status in get position [1970-Feb-23 00:42:25.726186]: GAP: Await->Done(Query) [1970-Feb-23 00:42:25.831912]: Suspend [1970-Feb-23 00:42:25.834172]: Suspend index 10 found, A-pos 15.0027 [1970-Feb-23 00:42:26.500320]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:42:29.840308]: GAP: Query->Await [1970-Feb-23 00:42:29.863337]: TH0: Retreived step position 14287119 [1970-Feb-23 00:42:29.898958]: wait for PRU status in get position [1970-Feb-23 00:42:29.900818]: wait for PRU status in get position [1970-Feb-23 00:42:29.902445]: GAP: Await->Done(Query) [1970-Feb-23 00:42:30.663483]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:42:30.665246]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:42:31.164881]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:42:35.227562]: Expend Buffer: false [1970-Feb-23 00:42:35.334129]: Syncing turned true [1970-Feb-23 00:42:35.362967]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:42:35.364796]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:42:35.761761]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:42:36.608808]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:42:36.610720]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:42:36.612506]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:42:36.614148]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:42:36.615791]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:42:36.617427]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:42:37.258270]: Expected packet id: 0x85, Got packet id: 0x84, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x3b,0xbe,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x1,0xa7,0x41,0x0,0x84,0x2a,0xe6,0x7b,0x61, [1970-Feb-23 00:42:37.260739]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:42:37.733839]: Expend Buffer: false [1970-Feb-23 00:42:48.462697]: Toolhead 0 state error: 81 [1970-Feb-23 00:42:50.096563]: toolhead pausing [1970-Feb-23 00:42:50.098292]: Toolhead 0 : Retry: Waited 1.63384s from state change [1970-Feb-23 00:42:50.103138]: Last sync period had (0,132,1755) buffer fulls due to suspend moves [1970-Feb-23 00:42:50.104866]: Syncing turned false [1970-Feb-23 00:42:50.106559]: quack pause: true [1970-Feb-23 00:42:50.153679]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:42:50.195851]: axis running: 0 [1970-Feb-23 00:42:50.352003]: axis running: 0 [1970-Feb-23 00:42:50.414505]: axis running: 0 [1970-Feb-23 00:42:50.473107]: axis running: 0 [1970-Feb-23 00:42:50.529129]: axis running: 0 [1970-Feb-23 00:42:50.601856]: axis running: 0 [1970-Feb-23 00:42:50.670529]: axis running: 0 [1970-Feb-23 00:42:50.717641]: axis running: 0 [1970-Feb-23 00:42:50.784250]: axis running: 0 [1970-Feb-23 00:42:50.867333]: axis running: 0 [1970-Feb-23 00:42:50.971738]: axis running: 0 [1970-Feb-23 00:42:51.043777]: axis running: 0 [1970-Feb-23 00:42:51.114744]: axis running: 0 [1970-Feb-23 00:42:51.177013]: axis running: 0 [1970-Feb-23 00:42:51.237788]: axis running: 0 [1970-Feb-23 00:42:51.322020]: axis running: 0 [1970-Feb-23 00:42:51.381883]: axis running: 0 [1970-Feb-23 00:42:51.468923]: axis running: 0 [1970-Feb-23 00:42:51.786217]: axis running: 0 [1970-Feb-23 00:42:52.063079]: axis running: 0 [1970-Feb-23 00:42:52.286235]: axis running: 0 [1970-Feb-23 00:42:52.425648]: axis running: 0 [1970-Feb-23 00:42:52.484725]: axis running: 0 [1970-Feb-23 00:42:52.548492]: axis running: 0 [1970-Feb-23 00:42:52.617408]: axis running: 0 [1970-Feb-23 00:42:52.667006]: axis running: 0 [1970-Feb-23 00:42:52.746333]: axis running: 0 [1970-Feb-23 00:42:52.796796]: axis running: 0 [1970-Feb-23 00:42:52.873748]: axis running: 0 [1970-Feb-23 00:42:52.959892]: axis running: 0 [1970-Feb-23 00:42:53.031152]: axis running: 0 [1970-Feb-23 00:42:53.111526]: axis running: 0 [1970-Feb-23 00:42:53.163636]: axis running: 0 [1970-Feb-23 00:42:53.222131]: axis running: 0 [1970-Feb-23 00:42:53.284286]: axis running: 0 [1970-Feb-23 00:42:53.370415]: axis running: 0 [1970-Feb-23 00:42:53.421346]: axis running: 0 [1970-Feb-23 00:42:53.525399]: axis running: 0 [1970-Feb-23 00:42:53.662503]: axis running: 0 [1970-Feb-23 00:42:53.718978]: axis running: 0 [1970-Feb-23 00:42:53.777217]: axis running: 0 [1970-Feb-23 00:42:53.847363]: axis running: 0 [1970-Feb-23 00:42:53.930392]: axis running: 0 [1970-Feb-23 00:42:53.988432]: axis running: 0 [1970-Feb-23 00:42:54.060456]: axis running: 0 [1970-Feb-23 00:42:54.135171]: axis running: 0 [1970-Feb-23 00:42:54.251245]: axis running: 0 [1970-Feb-23 00:42:54.299644]: axis running: 0 [1970-Feb-23 00:42:54.386340]: axis running: 0 [1970-Feb-23 00:42:54.443766]: axis running: 0 [1970-Feb-23 00:42:54.518047]: axis running: 0 [1970-Feb-23 00:42:54.593778]: axis running: 0 [1970-Feb-23 00:42:54.646606]: axis running: 0 [1970-Feb-23 00:42:54.705569]: axis running: 0 [1970-Feb-23 00:42:54.854181]: Toolhead 0 state error: 0 [1970-Feb-23 00:42:54.931369]: Last sync period had (0,132,1755) buffer fulls due to suspend moves [1970-Feb-23 00:42:54.933798]: Libstepper All Axis Abort [1970-Feb-23 00:42:54.935619]: Clear Toolhead Buffer [1970-Feb-23 00:42:54.953737]: clear toolhead buffer acknowledged [1970-Feb-23 00:42:55.094175]: toolhead unpausing [1970-Feb-23 00:42:55.096004]: quack pause: false [1970-Feb-23 00:42:55.236851]: Expend Buffer: true [1970-Feb-23 00:42:55.294147]: Last sync period had (0,132,1770) buffer fulls due to suspend moves [1970-Feb-23 00:42:55.295943]: Syncing turned false [1970-Feb-23 00:42:55.433732]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:42:55.458995]: GAP: Query->Await [1970-Feb-23 00:42:55.493369]: TH0: Retreived step position 14024975 [1970-Feb-23 00:42:55.532262]: wait for PRU status in get position [1970-Feb-23 00:42:55.533927]: wait for PRU status in get position [1970-Feb-23 00:42:55.535557]: GAP: Await->Done(Query) [1970-Feb-23 00:42:55.661653]: Suspend [1970-Feb-23 00:42:55.663423]: Suspend index 12 found, A-pos 39.5902 [1970-Feb-23 00:42:56.469063]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:43:00.379827]: GAP: Query->Await [1970-Feb-23 00:43:00.422827]: TH0: Retreived step position 13893903 [1970-Feb-23 00:43:00.459666]: wait for PRU status in get position [1970-Feb-23 00:43:00.461521]: wait for PRU status in get position [1970-Feb-23 00:43:00.463141]: GAP: Await->Done(Query) [1970-Feb-23 00:43:01.195899]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:43:01.197670]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:43:01.689332]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:43:18.838097]: Expend Buffer: false [1970-Feb-23 00:43:19.339174]: Syncing turned true [1970-Feb-23 00:43:19.356450]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:43:19.358303]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:43:19.802730]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:43:20.589884]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:43:20.591902]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:43:20.597644]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:43:20.599435]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:43:20.601340]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:43:20.603002]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:43:21.075800]: Expected packet id: 0xc2, Got packet id: 0xc1, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x46,0x23,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x93,0xff,0x0,0xc1,0x87,0x4,0x2e,0xd3, [1970-Feb-23 00:43:21.077725]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:43:21.704556]: Expend Buffer: false [1970-Feb-23 00:43:36.158406]: Toolhead 0 state error: 81 [1970-Feb-23 00:43:37.786909]: toolhead pausing [1970-Feb-23 00:43:37.788769]: Toolhead 0 : Retry: Waited 1.55276s from state change [1970-Feb-23 00:43:37.793375]: Last sync period had (0,132,1749) buffer fulls due to suspend moves [1970-Feb-23 00:43:37.795237]: Syncing turned false [1970-Feb-23 00:43:37.796847]: quack pause: true [1970-Feb-23 00:43:37.841858]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:43:37.942157]: axis running: 0 [1970-Feb-23 00:43:38.054336]: axis running: 0 [1970-Feb-23 00:43:38.212630]: axis running: 0 [1970-Feb-23 00:43:38.345599]: axis running: 0 [1970-Feb-23 00:43:38.543220]: axis running: 0 [1970-Feb-23 00:43:38.834262]: axis running: 0 [1970-Feb-23 00:43:38.923766]: axis running: 0 [1970-Feb-23 00:43:38.981070]: axis running: 0 [1970-Feb-23 00:43:39.045055]: axis running: 0 [1970-Feb-23 00:43:39.105046]: axis running: 0 [1970-Feb-23 00:43:39.209914]: axis running: 0 [1970-Feb-23 00:43:39.267164]: axis running: 0 [1970-Feb-23 00:43:39.341305]: axis running: 0 [1970-Feb-23 00:43:39.451696]: axis running: 0 [1970-Feb-23 00:43:39.532688]: axis running: 0 [1970-Feb-23 00:43:39.594476]: axis running: 0 [1970-Feb-23 00:43:39.670783]: axis running: 0 [1970-Feb-23 00:43:39.769174]: axis running: 0 [1970-Feb-23 00:43:39.841103]: axis running: 0 [1970-Feb-23 00:43:39.901488]: axis running: 0 [1970-Feb-23 00:43:39.965445]: axis running: 0 [1970-Feb-23 00:43:40.021325]: axis running: 0 [1970-Feb-23 00:43:40.095079]: axis running: 0 [1970-Feb-23 00:43:40.156110]: axis running: 0 [1970-Feb-23 00:43:40.227047]: axis running: 0 [1970-Feb-23 00:43:40.335498]: axis running: 0 [1970-Feb-23 00:43:40.407375]: axis running: 0 [1970-Feb-23 00:43:40.457113]: axis running: 0 [1970-Feb-23 00:43:40.516995]: axis running: 0 [1970-Feb-23 00:43:40.568970]: axis running: 0 [1970-Feb-23 00:43:40.658859]: axis running: 0 [1970-Feb-23 00:43:40.711989]: axis running: 0 [1970-Feb-23 00:43:40.774458]: axis running: 0 [1970-Feb-23 00:43:40.837663]: axis running: 0 [1970-Feb-23 00:43:40.948090]: axis running: 0 [1970-Feb-23 00:43:41.047800]: axis running: 0 [1970-Feb-23 00:43:41.122716]: axis running: 0 [1970-Feb-23 00:43:41.200967]: axis running: 0 [1970-Feb-23 00:43:41.259459]: axis running: 0 [1970-Feb-23 00:43:41.332610]: axis running: 0 [1970-Feb-23 00:43:41.393956]: axis running: 0 [1970-Feb-23 00:43:41.449236]: axis running: 0 [1970-Feb-23 00:43:41.562111]: axis running: 0 [1970-Feb-23 00:43:41.631096]: axis running: 0 [1970-Feb-23 00:43:41.689893]: axis running: 0 [1970-Feb-23 00:43:41.755670]: axis running: 0 [1970-Feb-23 00:43:41.823233]: axis running: 0 [1970-Feb-23 00:43:41.885797]: axis running: 0 [1970-Feb-23 00:43:41.970741]: axis running: 0 [1970-Feb-23 00:43:42.031504]: axis running: 0 [1970-Feb-23 00:43:42.140942]: axis running: 0 [1970-Feb-23 00:43:42.209492]: axis running: 0 [1970-Feb-23 00:43:42.258765]: axis running: 0 [1970-Feb-23 00:43:42.316086]: axis running: 0 [1970-Feb-23 00:43:42.386067]: axis running: 0 [1970-Feb-23 00:43:42.459057]: axis running: 0 [1970-Feb-23 00:43:42.521256]: axis running: 0 [1970-Feb-23 00:43:42.623872]: axis running: 0 [1970-Feb-23 00:43:42.758517]: axis running: 0 [1970-Feb-23 00:43:42.823031]: axis running: 0 [1970-Feb-23 00:43:42.883367]: axis running: 0 [1970-Feb-23 00:43:42.956014]: axis running: 0 [1970-Feb-23 00:43:43.019097]: axis running: 0 [1970-Feb-23 00:43:43.086352]: axis running: 0 [1970-Feb-23 00:43:43.134544]: axis running: 0 [1970-Feb-23 00:43:43.211573]: axis running: 0 [1970-Feb-23 00:43:43.309329]: axis running: 0 [1970-Feb-23 00:43:43.380745]: axis running: 0 [1970-Feb-23 00:43:43.446875]: axis running: 0 [1970-Feb-23 00:43:43.499397]: axis running: 0 [1970-Feb-23 00:43:43.568016]: axis running: 0 [1970-Feb-23 00:43:43.640979]: axis running: 0 [1970-Feb-23 00:43:43.720459]: axis running: 0 [1970-Feb-23 00:43:43.772016]: axis running: 0 [1970-Feb-23 00:43:43.879062]: axis running: 0 [1970-Feb-23 00:43:43.951832]: axis running: 0 [1970-Feb-23 00:43:44.008778]: axis running: 0 [1970-Feb-23 00:43:44.059184]: axis running: 0 [1970-Feb-23 00:43:44.138588]: axis running: 0 [1970-Feb-23 00:43:44.260388]: axis running: 0 [1970-Feb-23 00:43:44.334337]: axis running: 0 [1970-Feb-23 00:43:44.461197]: axis running: 0 [1970-Feb-23 00:43:44.523897]: axis running: 0 [1970-Feb-23 00:43:44.588219]: axis running: 0 [1970-Feb-23 00:43:44.653378]: axis running: 0 [1970-Feb-23 00:43:44.744577]: axis running: 0 [1970-Feb-23 00:43:44.803888]: axis running: 0 [1970-Feb-23 00:43:44.884882]: axis running: 0 [1970-Feb-23 00:43:44.946843]: axis running: 0 [1970-Feb-23 00:43:45.063536]: axis running: 0 [1970-Feb-23 00:43:45.130376]: axis running: 0 [1970-Feb-23 00:43:45.290810]: Last sync period had (0,132,1749) buffer fulls due to suspend moves [1970-Feb-23 00:43:45.293221]: Libstepper All Axis Abort [1970-Feb-23 00:43:45.295717]: Clear Toolhead Buffer [1970-Feb-23 00:43:45.332919]: Toolhead 0 state error: 0 [1970-Feb-23 00:43:45.334636]: clear toolhead buffer acknowledged [1970-Feb-23 00:43:45.423254]: toolhead unpausing [1970-Feb-23 00:43:45.424932]: quack pause: false [1970-Feb-23 00:43:45.541699]: Expend Buffer: true [1970-Feb-23 00:43:45.629316]: Last sync period had (0,132,1767) buffer fulls due to suspend moves [1970-Feb-23 00:43:45.631413]: Syncing turned false [1970-Feb-23 00:43:45.715825]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:43:45.762606]: GAP: Query->Await [1970-Feb-23 00:43:45.831905]: TH0: Retreived step position 14221583 [1970-Feb-23 00:43:45.871524]: wait for PRU status in get position [1970-Feb-23 00:43:45.873210]: wait for PRU status in get position [1970-Feb-23 00:43:45.874837]: GAP: Await->Done(Query) [1970-Feb-23 00:43:46.015069]: Suspend [1970-Feb-23 00:43:46.016913]: Suspend index 14 found, A-pos 72.962 [1970-Feb-23 00:43:48.326557]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:43:51.931278]: GAP: Query->Await [1970-Feb-23 00:43:51.962819]: TH0: Retreived step position 14090511 [1970-Feb-23 00:43:51.986680]: wait for PRU status in get position [1970-Feb-23 00:43:51.988339]: wait for PRU status in get position [1970-Feb-23 00:43:51.990306]: GAP: Await->Done(Query) [1970-Feb-23 00:43:52.733077]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:43:52.734844]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:43:53.252137]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:43:57.372249]: Expend Buffer: false [1970-Feb-23 00:43:57.419955]: Syncing turned true [1970-Feb-23 00:43:57.462767]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:43:57.464480]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:43:57.906168]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:43:58.721191]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:43:58.723050]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:43:58.724719]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:43:58.726468]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:43:58.728117]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:43:58.730319]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:43:58.839231]: Expected packet id: 0xe5, Got packet id: 0xe4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x54,0x43,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x3,0xdf,0x93,0x0,0xe4,0x56,0xe,0x78,0x4d, [1970-Feb-23 00:43:58.841466]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:43:59.855528]: Expend Buffer: false [1970-Feb-23 00:44:18.844500]: Toolhead 0 state error: 81 [1970-Feb-23 00:44:20.368180]: toolhead pausing [1970-Feb-23 00:44:20.369910]: Toolhead 0 : Retry: Waited 1.52363s from state change [1970-Feb-23 00:44:20.375100]: Last sync period had (0,132,1761) buffer fulls due to suspend moves [1970-Feb-23 00:44:20.376843]: Syncing turned false [1970-Feb-23 00:44:20.378593]: quack pause: true [1970-Feb-23 00:44:20.423880]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:44:20.492406]: axis running: 0 [1970-Feb-23 00:44:20.629692]: axis running: 0 [1970-Feb-23 00:44:20.689916]: axis running: 0 [1970-Feb-23 00:44:20.762065]: axis running: 0 [1970-Feb-23 00:44:20.823930]: axis running: 0 [1970-Feb-23 00:44:20.890874]: axis running: 0 [1970-Feb-23 00:44:20.952923]: axis running: 0 [1970-Feb-23 00:44:21.009903]: axis running: 0 [1970-Feb-23 00:44:21.069782]: axis running: 0 [1970-Feb-23 00:44:21.186085]: axis running: 0 [1970-Feb-23 00:44:21.270255]: axis running: 0 [1970-Feb-23 00:44:21.325525]: axis running: 0 [1970-Feb-23 00:44:21.389038]: axis running: 0 [1970-Feb-23 00:44:21.469884]: axis running: 0 [1970-Feb-23 00:44:21.543034]: axis running: 0 [1970-Feb-23 00:44:21.603582]: axis running: 0 [1970-Feb-23 00:44:21.655458]: axis running: 0 [1970-Feb-23 00:44:21.792099]: axis running: 0 [1970-Feb-23 00:44:21.871027]: axis running: 0 [1970-Feb-23 00:44:21.933018]: axis running: 0 [1970-Feb-23 00:44:22.045315]: axis running: 0 [1970-Feb-23 00:44:22.122353]: axis running: 0 [1970-Feb-23 00:44:22.184837]: axis running: 0 [1970-Feb-23 00:44:22.261769]: axis running: 0 [1970-Feb-23 00:44:22.364572]: axis running: 0 [1970-Feb-23 00:44:22.401950]: axis running: 0 [1970-Feb-23 00:44:22.447230]: axis running: 0 [1970-Feb-23 00:44:22.489708]: axis running: 0 [1970-Feb-23 00:44:22.522801]: axis running: 0 [1970-Feb-23 00:44:22.554090]: axis running: 0 [1970-Feb-23 00:44:22.606969]: axis running: 0 [1970-Feb-23 00:44:22.638304]: axis running: 0 [1970-Feb-23 00:44:22.669429]: axis running: 0 [1970-Feb-23 00:44:22.726541]: axis running: 0 [1970-Feb-23 00:44:22.758253]: axis running: 0 [1970-Feb-23 00:44:22.789717]: axis running: 0 [1970-Feb-23 00:44:22.834620]: axis running: 0 [1970-Feb-23 00:44:22.904604]: axis running: 0 [1970-Feb-23 00:44:22.946335]: axis running: 0 [1970-Feb-23 00:44:22.996958]: axis running: 0 [1970-Feb-23 00:44:23.029709]: axis running: 0 [1970-Feb-23 00:44:23.061766]: axis running: 0 [1970-Feb-23 00:44:23.109457]: axis running: 0 [1970-Feb-23 00:44:23.148557]: axis running: 0 [1970-Feb-23 00:44:23.179622]: axis running: 0 [1970-Feb-23 00:44:23.221137]: axis running: 0 [1970-Feb-23 00:44:23.269641]: axis running: 0 [1970-Feb-23 00:44:23.302339]: axis running: 0 [1970-Feb-23 00:44:23.334915]: axis running: 0 [1970-Feb-23 00:44:23.384332]: axis running: 0 [1970-Feb-23 00:44:23.426316]: axis running: 0 [1970-Feb-23 00:44:23.494915]: axis running: 0 [1970-Feb-23 00:44:23.601404]: axis running: 0 [1970-Feb-23 00:44:23.659962]: axis running: 0 [1970-Feb-23 00:44:23.701190]: axis running: 0 [1970-Feb-23 00:44:23.735789]: axis running: 0 [1970-Feb-23 00:44:23.787385]: axis running: 0 [1970-Feb-23 00:44:23.823095]: axis running: 0 [1970-Feb-23 00:44:23.861193]: axis running: 0 [1970-Feb-23 00:44:23.909105]: axis running: 0 [1970-Feb-23 00:44:23.953187]: axis running: 0 [1970-Feb-23 00:44:23.984676]: axis running: 0 [1970-Feb-23 00:44:24.067043]: axis running: 0 [1970-Feb-23 00:44:24.104016]: axis running: 0 [1970-Feb-23 00:44:24.138280]: axis running: 0 [1970-Feb-23 00:44:24.189912]: axis running: 0 [1970-Feb-23 00:44:24.228027]: axis running: 0 [1970-Feb-23 00:44:24.263069]: axis running: 0 [1970-Feb-23 00:44:24.310411]: axis running: 0 [1970-Feb-23 00:44:24.350942]: axis running: 0 [1970-Feb-23 00:44:24.385384]: axis running: 0 [1970-Feb-23 00:44:24.432969]: axis running: 0 [1970-Feb-23 00:44:24.473817]: axis running: 0 [1970-Feb-23 00:44:24.506701]: axis running: 0 [1970-Feb-23 00:44:24.543358]: axis running: 0 [1970-Feb-23 00:44:24.636315]: Toolhead 0 state error: 0 [1970-Feb-23 00:44:24.685873]: Last sync period had (0,132,1761) buffer fulls due to suspend moves [1970-Feb-23 00:44:24.688199]: Libstepper All Axis Abort [1970-Feb-23 00:44:24.689900]: Clear Toolhead Buffer [1970-Feb-23 00:44:24.719490]: clear toolhead buffer acknowledged [1970-Feb-23 00:44:24.769099]: toolhead unpausing [1970-Feb-23 00:44:24.771022]: quack pause: false [1970-Feb-23 00:44:24.849201]: Expend Buffer: true [1970-Feb-23 00:44:24.877150]: Last sync period had (0,132,1776) buffer fulls due to suspend moves [1970-Feb-23 00:44:24.878955]: Syncing turned false [1970-Feb-23 00:44:24.920951]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:44:24.954657]: GAP: Query->Await [1970-Feb-23 00:44:24.980584]: TH0: Retreived step position 14156047 [1970-Feb-23 00:44:25.001093]: wait for PRU status in get position [1970-Feb-23 00:44:25.002768]: wait for PRU status in get position [1970-Feb-23 00:44:25.004505]: GAP: Await->Done(Query) [1970-Feb-23 00:44:25.113470]: Suspend [1970-Feb-23 00:44:25.115378]: Suspend index 16 found, A-pos 97.1897 [1970-Feb-23 00:44:25.561619]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:44:29.813163]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:44:30.112394]: GAP: Query->Await [1970-Feb-23 00:44:30.124348]: TH0: Retreived step position 14156047 [1970-Feb-23 00:44:30.159890]: wait for PRU status in get position [1970-Feb-23 00:44:30.161776]: wait for PRU status in get position [1970-Feb-23 00:44:30.163522]: GAP: Await->Done(Query) [1970-Feb-23 00:44:51.654651]: toolhead pausing [1970-Feb-23 00:44:51.672967]: Last sync period had (0,132,2424) buffer fulls due to suspend moves [1970-Feb-23 00:44:51.674729]: Syncing turned false [1970-Feb-23 00:44:51.676516]: quack pause: true [1970-Feb-23 00:44:51.895021]: Last sync period had (0,132,2433) buffer fulls due to suspend moves [1970-Feb-23 00:44:51.896809]: Libstepper All Axis Abort [1970-Feb-23 00:44:51.898502]: Clear Toolhead Buffer [1970-Feb-23 00:44:51.962686]: clear toolhead buffer acknowledged [1970-Feb-23 00:44:52.055639]: toolhead unpausing [1970-Feb-23 00:44:52.057346]: quack pause: false [1970-Feb-23 00:44:52.185338]: Expend Buffer: true [1970-Feb-23 00:44:52.239119]: Last sync period had (0,132,2448) buffer fulls due to suspend moves [1970-Feb-23 00:44:52.246845]: Syncing turned false [1970-Feb-23 00:44:52.417907]: GAP: Query->Await [1970-Feb-23 00:44:52.449538]: TH0: Retreived step position 14090511 [1970-Feb-23 00:44:52.477567]: wait for PRU status in get position [1970-Feb-23 00:44:52.479214]: wait for PRU status in get position [1970-Feb-23 00:44:52.490663]: GAP: Await->Done(Query) [1970-Feb-23 00:44:52.633866]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:44:52.640290]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:44:58.102188]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:45:02.073119]: Last sync period had (0,132,2997) buffer fulls due to suspend moves [1970-Feb-23 00:45:02.075041]: Syncing turned false [1970-Feb-23 00:45:02.076814]: TH0: 79 failures in last 2674 packets (2.95438%) [1970-Feb-23 00:45:02.078752]: Toolhead Abort [1970-Feb-23 00:45:02.090758]: aborting pru with shutdown=true [1970-Feb-23 00:45:02.093621]: Last sync period had (0,132,2997) buffer fulls due to suspend moves [1970-Feb-23 00:45:02.095448]: Libstepper All Axis Abort [1970-Feb-23 00:45:02.097086]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:45:02.098780]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:45:02.204354]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:45:02.211007]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:45:02.298819]: Commanding stats update: Retract count: 3426486777 [1970-Feb-23 00:45:02.300886]: Toolhead 0 marked as possibly blocking! [1970-Feb-23 00:45:02.922655]: Toolhead 0 done blocking! [1970-Feb-23 00:45:03.070580]: GetToolUsageStats called in machine state 0 [1970-Feb-23 00:45:03.072341]: Commanding tool usage stat retrieve [1970-Feb-23 00:45:03.074150]: GetToolUsageState: Proceeds to 1 [1970-Feb-23 00:45:03.075806]: GetToolUsagState: Error from retrieve: 0x10a [1970-Feb-23 00:45:03.098116]: Raw usage stats: retract 2558006258ct, extrusion 139238767 steps, 648194 seconds, refurbed 0 times [1970-Feb-23 00:45:03.166321]: GetToolUsageStats called in machine state 1 [1970-Feb-23 00:45:03.168086]: VerifyToolUsageStatsRetrieved: Done [1970-Feb-23 00:45:03.169728]: GetToolUsageState: Proceeds to 2 [1970-Feb-23 00:45:03.240684]: GetToolUsageStats called in machine state 2 [1970-Feb-23 00:45:03.242434]: GetToolUsageState: Done, resets [1970-Feb-23 00:45:13.744491]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:45:13.746252]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:45:15.072180]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:46:06.302979]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:46:11.832965]: Raw HES proceeding [1970-Feb-23 00:46:11.868092]: Got raw val 18201, saturated: false [1970-Feb-23 00:46:11.885138]: Returning HES [1970-Feb-23 00:46:11.886809]: Sending back val 18201, saturated false [1970-Feb-23 00:46:11.985918]: Toolhead Abort [1970-Feb-23 00:46:11.987673]: aborting pru with shutdown=true [1970-Feb-23 00:46:12.000830]: Last sync period had (0,132,7227) buffer fulls due to suspend moves [1970-Feb-23 00:46:12.003411]: Libstepper All Axis Abort [1970-Feb-23 00:46:16.773974]: Toolhead 0 state error: 80 [1970-Feb-23 00:47:21.573171]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:47:21.581448]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:47:22.839017]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:47:24.498168]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:47:30.839361]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:47:35.930830]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:47:41.676120]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:47:46.805226]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:47:52.604740]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:47:57.482763]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:48:02.011320]: Toolhead 0 state error: 0 [1970-Feb-23 00:48:02.420802]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:48:08.188213]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:48:13.048725]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:48:15.917112]: Raw HES proceeding [1970-Feb-23 00:48:15.953839]: Got raw val 18218, saturated: false [1970-Feb-23 00:48:15.979268]: Returning HES [1970-Feb-23 00:48:15.991397]: Sending back val 18218, saturated false [1970-Feb-23 00:48:16.175568]: Toolhead Abort [1970-Feb-23 00:48:16.177376]: aborting pru with shutdown=true [1970-Feb-23 00:48:16.213113]: Last sync period had (0,132,10734) buffer fulls due to suspend moves [1970-Feb-23 00:48:16.214894]: Libstepper All Axis Abort [1970-Feb-23 00:48:24.840884]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:48:24.842665]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:48:43.314192]: Heater manager Set Target Temperature to 180, index 0 [1970-Feb-23 00:48:43.316080]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:48:44.556361]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Feb-23 00:48:44.558355]: Load Sense Limit Method: 1 [1970-Feb-23 00:48:44.561719]: Last sync period had (0,132,10992) buffer fulls due to suspend moves [1970-Feb-23 00:48:44.570296]: Libstepper All Axis Abort [1970-Feb-23 00:48:48.594266]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:48:51.140440]: HOME: 1 homing: Limit Detected!: [1970-Feb-23 00:48:51.142988]: Toolhead Abort [1970-Feb-23 00:48:51.144698]: aborting pru with shutdown=true [1970-Feb-23 00:48:51.160849]: Last sync period had (0,132,11340) buffer fulls due to suspend moves [1970-Feb-23 00:48:51.162775]: Libstepper All Axis Abort [1970-Feb-23 00:48:51.212054]: HOME: 1 homing: Limit Detected!: [1970-Feb-23 00:48:53.159191]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Feb-23 00:48:53.171670]: Load Sense Limit Method: 0 [1970-Feb-23 00:48:53.178270]: Last sync period had (0,132,11454) buffer fulls due to suspend moves [1970-Feb-23 00:48:53.180380]: Libstepper All Axis Abort [1970-Feb-23 00:48:55.132281]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:01.076483]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:06.231043]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:07.269614]: HOME: 0 homing: Limit Detected!: [1970-Feb-23 00:49:07.275977]: Toolhead Abort [1970-Feb-23 00:49:07.277689]: aborting pru with shutdown=true [1970-Feb-23 00:49:07.290826]: Last sync period had (0,132,12285) buffer fulls due to suspend moves [1970-Feb-23 00:49:07.292592]: Libstepper All Axis Abort [1970-Feb-23 00:49:07.349899]: HOME: 0 homing: Limit Detected!: [1970-Feb-23 00:49:10.108274]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Feb-23 00:49:12.605467]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:17.946958]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:22.359894]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:27.572481]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:31.399798]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:49:31.401870]: Toolhead Abort [1970-Feb-23 00:49:31.403698]: aborting pru with shutdown=false [1970-Feb-23 00:49:31.406237]: Last sync period had (0,132,13839) buffer fulls due to suspend moves [1970-Feb-23 00:49:31.407958]: Libstepper All Axis Abort [1970-Feb-23 00:49:31.498340]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:49:32.132088]: libstepper: true toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:32.218098]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Feb-23 00:49:32.738862]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:33.006190]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:33.283877]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:33.550930]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:33.817625]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:34.086829]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:34.355248]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:34.621520]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:34.900406]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:35.176297]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:35.189894]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Feb-23 00:49:35.454266]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:35.720822]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:35.988163]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:49:36.222406]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:49:36.224225]: Toolhead Abort [1970-Feb-23 00:49:36.226068]: aborting pru with shutdown=false [1970-Feb-23 00:49:36.240835]: Last sync period had (0,132,13905) buffer fulls due to suspend moves [1970-Feb-23 00:49:36.242737]: Libstepper All Axis Abort [1970-Feb-23 00:49:36.284156]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:49:36.535470]: GAP: Query->Await [1970-Feb-23 00:49:36.549422]: TH0: Retreived step position 11731215 [1970-Feb-23 00:49:36.566390]: wait for PRU status in get position [1970-Feb-23 00:49:36.568101]: wait for PRU status in get position [1970-Feb-23 00:49:36.569816]: GAP: Await->Done(Query) [1970-Feb-23 00:49:36.805185]: Heater manager Set Target Temperature to 180, index 0 [1970-Feb-23 00:49:36.806976]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:49:38.153430]: Expecting 806072 steps extruded this print from 7425.81 mm of plastic [1970-Feb-23 00:49:38.483783]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:49:38.491959]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:49:38.802826]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:50:50.764374]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:50:56.032183]: Expend Buffer: false [1970-Feb-23 00:50:56.135453]: Syncing turned true [1970-Feb-23 00:50:56.217112]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:50:56.218829]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:50:56.543013]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:50:56.763404]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:50:56.765298]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:50:56.766997]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:50:56.768682]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:50:56.771708]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:50:56.773551]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:50:57.078906]: Expected packet id: 0x6d, Got packet id: 0x6c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xb6,0xb4,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x38,0xf6,0x0,0x6c,0x4a,0x35,0x45,0x34, [1970-Feb-23 00:50:57.081028]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:50:57.678902]: Expected packet id: 0xb3, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb6,0xb4,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3, [1970-Feb-23 00:50:57.684068]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:50:58.317486]: Expected packet id: 0xd4, Got packet id: 0xd3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb7,0x30,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x2,0xc5,0x0,0xd3,0xc8,0x4e,0x9d,0x59, [1970-Feb-23 00:50:58.319399]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:51:22.587563]: Toolhead 0 state error: 81 [1970-Feb-23 00:51:24.135464]: toolhead pausing [1970-Feb-23 00:51:24.137163]: Toolhead 0 : Retry: Waited 1.54766s from state change [1970-Feb-23 00:51:24.142306]: Last sync period had (0,159,2352) buffer fulls due to suspend moves [1970-Feb-23 00:51:24.144074]: Syncing turned false [1970-Feb-23 00:51:24.145808]: quack pause: true [1970-Feb-23 00:51:24.248495]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:51:24.355469]: axis running: 0 [1970-Feb-23 00:51:24.447887]: axis running: 0 [1970-Feb-23 00:51:24.518802]: axis running: 0 [1970-Feb-23 00:51:24.587224]: axis running: 0 [1970-Feb-23 00:51:24.651376]: axis running: 0 [1970-Feb-23 00:51:24.716036]: axis running: 0 [1970-Feb-23 00:51:24.775944]: axis running: 0 [1970-Feb-23 00:51:24.901009]: axis running: 0 [1970-Feb-23 00:51:24.962213]: axis running: 0 [1970-Feb-23 00:51:25.036096]: axis running: 0 [1970-Feb-23 00:51:25.112380]: axis running: 0 [1970-Feb-23 00:51:25.162524]: axis running: 0 [1970-Feb-23 00:51:25.217279]: axis running: 0 [1970-Feb-23 00:51:25.291031]: axis running: 0 [1970-Feb-23 00:51:25.354011]: axis running: 0 [1970-Feb-23 00:51:25.448293]: axis running: 0 [1970-Feb-23 00:51:25.528164]: axis running: 0 [1970-Feb-23 00:51:25.602902]: axis running: 0 [1970-Feb-23 00:51:25.659927]: axis running: 0 [1970-Feb-23 00:51:25.731245]: axis running: 0 [1970-Feb-23 00:51:25.841318]: axis running: 0 [1970-Feb-23 00:51:25.910647]: axis running: 0 [1970-Feb-23 00:51:26.033829]: axis running: 0 [1970-Feb-23 00:51:26.096106]: axis running: 0 [1970-Feb-23 00:51:26.163369]: axis running: 0 [1970-Feb-23 00:51:26.225345]: axis running: 0 [1970-Feb-23 00:51:26.286684]: axis running: 0 [1970-Feb-23 00:51:26.355635]: axis running: 0 [1970-Feb-23 00:51:26.411787]: axis running: 0 [1970-Feb-23 00:51:26.481297]: axis running: 0 [1970-Feb-23 00:51:26.589575]: axis running: 0 [1970-Feb-23 00:51:26.653408]: axis running: 0 [1970-Feb-23 00:51:26.730771]: axis running: 0 [1970-Feb-23 00:51:26.796578]: axis running: 0 [1970-Feb-23 00:51:26.863604]: axis running: 0 [1970-Feb-23 00:51:26.906967]: axis running: 0 [1970-Feb-23 00:51:26.959715]: axis running: 0 [1970-Feb-23 00:51:27.049332]: axis running: 0 [1970-Feb-23 00:51:27.169241]: axis running: 0 [1970-Feb-23 00:51:27.231236]: axis running: 0 [1970-Feb-23 00:51:27.309736]: axis running: 0 [1970-Feb-23 00:51:27.407462]: axis running: 0 [1970-Feb-23 00:51:27.491070]: axis running: 0 [1970-Feb-23 00:51:27.561246]: axis running: 0 [1970-Feb-23 00:51:27.623619]: axis running: 0 [1970-Feb-23 00:51:27.725616]: axis running: 0 [1970-Feb-23 00:51:27.788309]: axis running: 0 [1970-Feb-23 00:51:27.853721]: axis running: 0 [1970-Feb-23 00:51:27.917343]: axis running: 0 [1970-Feb-23 00:51:27.981234]: axis running: 0 [1970-Feb-23 00:51:28.050733]: axis running: 0 [1970-Feb-23 00:51:28.122103]: axis running: 0 [1970-Feb-23 00:51:28.182323]: axis running: 0 [1970-Feb-23 00:51:28.295996]: axis running: 0 [1970-Feb-23 00:51:28.352111]: axis running: 0 [1970-Feb-23 00:51:28.409279]: axis running: 0 [1970-Feb-23 00:51:28.468312]: axis running: 0 [1970-Feb-23 00:51:28.544367]: axis running: 0 [1970-Feb-23 00:51:28.603184]: axis running: 0 [1970-Feb-23 00:51:28.664830]: axis running: 0 [1970-Feb-23 00:51:28.726957]: axis running: 0 [1970-Feb-23 00:51:28.802797]: axis running: 0 [1970-Feb-23 00:51:28.899648]: axis running: 0 [1970-Feb-23 00:51:29.008813]: axis running: 0 [1970-Feb-23 00:51:29.091370]: axis running: 0 [1970-Feb-23 00:51:29.170513]: axis running: 0 [1970-Feb-23 00:51:29.232442]: axis running: 0 [1970-Feb-23 00:51:29.311607]: axis running: 0 [1970-Feb-23 00:51:29.360906]: axis running: 0 [1970-Feb-23 00:51:29.458603]: axis running: 0 [1970-Feb-23 00:51:29.533894]: axis running: 0 [1970-Feb-23 00:51:29.591825]: axis running: 0 [1970-Feb-23 00:51:29.662345]: axis running: 0 [1970-Feb-23 00:51:29.717215]: axis running: 0 [1970-Feb-23 00:51:29.791347]: axis running: 0 [1970-Feb-23 00:51:29.847188]: axis running: 0 [1970-Feb-23 00:51:29.898987]: axis running: 0 [1970-Feb-23 00:51:29.959892]: axis running: 0 [1970-Feb-23 00:51:30.083054]: axis running: 0 [1970-Feb-23 00:51:30.138239]: axis running: 0 [1970-Feb-23 00:51:30.199681]: axis running: 0 [1970-Feb-23 00:51:30.277007]: axis running: 0 [1970-Feb-23 00:51:30.348664]: axis running: 0 [1970-Feb-23 00:51:30.412623]: axis running: 0 [1970-Feb-23 00:51:30.474669]: axis running: 0 [1970-Feb-23 00:51:30.602932]: axis running: 0 [1970-Feb-23 00:51:30.732335]: axis running: 0 [1970-Feb-23 00:51:30.804156]: axis running: 0 [1970-Feb-23 00:51:30.869485]: axis running: 0 [1970-Feb-23 00:51:30.927144]: axis running: 0 [1970-Feb-23 00:51:31.000953]: axis running: 0 [1970-Feb-23 00:51:31.071165]: axis running: 0 [1970-Feb-23 00:51:31.133638]: axis running: 0 [1970-Feb-23 00:51:31.195157]: axis running: 0 [1970-Feb-23 00:51:31.331001]: axis running: 0 [1970-Feb-23 00:51:31.396643]: axis running: 0 [1970-Feb-23 00:51:31.447786]: axis running: 0 [1970-Feb-23 00:51:31.531691]: axis running: 0 [1970-Feb-23 00:51:31.606774]: axis running: 0 [1970-Feb-23 00:51:31.716687]: axis running: 0 [1970-Feb-23 00:51:31.886992]: axis running: 0 [1970-Feb-23 00:51:32.216789]: axis running: 0 [1970-Feb-23 00:51:32.480924]: Toolhead 0 state error: 0 [1970-Feb-23 00:51:32.720775]: Last sync period had (0,159,2352) buffer fulls due to suspend moves [1970-Feb-23 00:51:32.723334]: Libstepper All Axis Abort [1970-Feb-23 00:51:32.725037]: Clear Toolhead Buffer [1970-Feb-23 00:51:32.752700]: clear toolhead buffer acknowledged [1970-Feb-23 00:51:32.843306]: toolhead unpausing [1970-Feb-23 00:51:32.844984]: quack pause: false [1970-Feb-23 00:51:32.963408]: Expend Buffer: true [1970-Feb-23 00:51:33.017835]: Last sync period had (0,159,2367) buffer fulls due to suspend moves [1970-Feb-23 00:51:33.019665]: Syncing turned false [1970-Feb-23 00:51:33.109630]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:51:33.149524]: GAP: Query->Await [1970-Feb-23 00:51:33.173156]: TH0: Retreived step position 13959439 [1970-Feb-23 00:51:33.252851]: wait for PRU status in get position [1970-Feb-23 00:51:33.254508]: wait for PRU status in get position [1970-Feb-23 00:51:33.256146]: GAP: Await->Done(Query) [1970-Feb-23 00:51:33.373420]: Suspend [1970-Feb-23 00:51:33.375306]: Suspend index 16 found, A-pos 97.1897 [1970-Feb-23 00:51:36.433291]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:51:38.452288]: GAP: Query->Await [1970-Feb-23 00:51:38.472821]: TH0: Retreived step position 13959439 [1970-Feb-23 00:51:38.555143]: wait for PRU status in get position [1970-Feb-23 00:51:38.562253]: GAP: Await->Done(Query) [1970-Feb-23 00:51:39.346112]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:51:39.347900]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:51:39.840460]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:51:43.931745]: Expend Buffer: false [1970-Feb-23 00:51:43.994404]: Syncing turned true [1970-Feb-23 00:51:44.032778]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:51:44.034496]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:51:44.500360]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:51:45.145169]: Expected packet id: 0xdf, Got packet id: 0xde, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xdf,0xce,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x3,0x19,0x44,0x0,0xde,0xbf,0x5b,0xa0,0xab, [1970-Feb-23 00:51:45.147075]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:51:45.319383]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:51:45.321358]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:51:45.323160]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:51:45.324815]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:51:45.326466]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:51:45.328117]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:51:45.490995]: Expected packet id: 0x34, Got packet id: 0x33, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xdf,0xce,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x3,0x1,0x3c,0x0,0x33,0xd8,0x4a,0x41,0xcb, [1970-Feb-23 00:51:45.492912]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:51:45.498032]: Expected packet id: 0x34, Got packet id: 0x33, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xdf,0xce,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x3,0x1,0x3c,0x0,0x33,0xd8,0x4a,0x41,0xcb, [1970-Feb-23 00:51:45.499947]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Feb-23 00:51:45.809143]: Expected packet id: 0x54, Got packet id: 0xce, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xdf,0xce,0x1,0x0,0xd7,0x0, [1970-Feb-23 00:51:45.811397]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:51:45.886554]: Expected packet id: 0x66, Got packet id: 0x65, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xdf,0xce,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0xe6,0x13,0x0,0x65,0x1f,0x9b,0xe4,0xe6, [1970-Feb-23 00:51:45.888452]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:51:46.494758]: Expend Buffer: false [1970-Feb-23 00:52:02.756805]: Toolhead 0 state error: 81 [1970-Feb-23 00:52:04.308924]: toolhead pausing [1970-Feb-23 00:52:04.310950]: Toolhead 0 : Retry: Waited 1.54914s from state change [1970-Feb-23 00:52:04.315602]: Last sync period had (0,135,1794) buffer fulls due to suspend moves [1970-Feb-23 00:52:04.317339]: Syncing turned false [1970-Feb-23 00:52:04.318965]: quack pause: true [1970-Feb-23 00:52:04.383141]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:52:04.425886]: axis running: 0 [1970-Feb-23 00:52:04.578978]: axis running: 0 [1970-Feb-23 00:52:04.653743]: axis running: 0 [1970-Feb-23 00:52:04.712492]: axis running: 0 [1970-Feb-23 00:52:04.780880]: axis running: 0 [1970-Feb-23 00:52:04.843849]: axis running: 0 [1970-Feb-23 00:52:04.907341]: axis running: 0 [1970-Feb-23 00:52:04.972166]: axis running: 0 [1970-Feb-23 00:52:05.050476]: axis running: 0 [1970-Feb-23 00:52:05.171525]: axis running: 0 [1970-Feb-23 00:52:05.218447]: axis running: 0 [1970-Feb-23 00:52:05.303230]: axis running: 0 [1970-Feb-23 00:52:05.369168]: axis running: 0 [1970-Feb-23 00:52:05.436435]: axis running: 0 [1970-Feb-23 00:52:05.497194]: axis running: 0 [1970-Feb-23 00:52:05.583607]: axis running: 0 [1970-Feb-23 00:52:05.647433]: axis running: 0 [1970-Feb-23 00:52:05.785213]: axis running: 0 [1970-Feb-23 00:52:05.855058]: axis running: 0 [1970-Feb-23 00:52:05.982527]: axis running: 0 [1970-Feb-23 00:52:06.259248]: axis running: 0 [1970-Feb-23 00:52:06.525962]: axis running: 0 [1970-Feb-23 00:52:06.740710]: axis running: 0 [1970-Feb-23 00:52:06.832790]: Toolhead 0 state error: 0 [1970-Feb-23 00:52:06.910833]: Last sync period had (0,135,1794) buffer fulls due to suspend moves [1970-Feb-23 00:52:06.913473]: Libstepper All Axis Abort [1970-Feb-23 00:52:06.915200]: Clear Toolhead Buffer [1970-Feb-23 00:52:06.929443]: clear toolhead buffer acknowledged [1970-Feb-23 00:52:06.983864]: toolhead unpausing [1970-Feb-23 00:52:06.985521]: quack pause: false [1970-Feb-23 00:52:07.057084]: Expend Buffer: true [1970-Feb-23 00:52:07.085598]: Last sync period had (0,135,1809) buffer fulls due to suspend moves [1970-Feb-23 00:52:07.087413]: Syncing turned false [1970-Feb-23 00:52:07.159554]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:52:07.184830]: GAP: Query->Await [1970-Feb-23 00:52:07.196718]: TH0: Retreived step position 14156047 [1970-Feb-23 00:52:07.216270]: wait for PRU status in get position [1970-Feb-23 00:52:07.218069]: wait for PRU status in get position [1970-Feb-23 00:52:07.219689]: GAP: Await->Done(Query) [1970-Feb-23 00:52:07.298895]: Suspend [1970-Feb-23 00:52:07.300930]: Suspend index 22 found, A-pos 116.462 [1970-Feb-23 00:52:08.544858]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:52:11.284088]: toolhead pausing [1970-Feb-23 00:52:11.292742]: Last sync period had (0,135,2025) buffer fulls due to suspend moves [1970-Feb-23 00:52:11.295152]: Syncing turned false [1970-Feb-23 00:52:11.296790]: quack pause: true [1970-Feb-23 00:52:11.408681]: axis running: 0 [1970-Feb-23 00:52:11.580750]: axis running: 0 [1970-Feb-23 00:52:11.643012]: axis running: 0 [1970-Feb-23 00:52:11.689949]: axis running: 0 [1970-Feb-23 00:52:11.747539]: axis running: 0 [1970-Feb-23 00:52:11.820951]: axis running: 0 [1970-Feb-23 00:52:11.866986]: axis running: 0 [1970-Feb-23 00:52:11.928759]: axis running: 0 [1970-Feb-23 00:52:11.988708]: axis running: 0 [1970-Feb-23 00:52:12.095487]: axis running: 0 [1970-Feb-23 00:52:12.139870]: axis running: 0 [1970-Feb-23 00:52:12.197043]: axis running: 0 [1970-Feb-23 00:52:12.242461]: axis running: 0 [1970-Feb-23 00:52:12.289249]: axis running: 0 [1970-Feb-23 00:52:12.354465]: axis running: 0 [1970-Feb-23 00:52:12.397360]: axis running: 0 [1970-Feb-23 00:52:12.454463]: axis running: 0 [1970-Feb-23 00:52:12.502628]: axis running: 0 [1970-Feb-23 00:52:12.558057]: axis running: 0 [1970-Feb-23 00:52:12.617509]: axis running: 0 [1970-Feb-23 00:52:12.699259]: axis running: 0 [1970-Feb-23 00:52:12.751483]: axis running: 0 [1970-Feb-23 00:52:12.801410]: axis running: 0 [1970-Feb-23 00:52:12.874149]: axis running: 0 [1970-Feb-23 00:52:12.920606]: axis running: 0 [1970-Feb-23 00:52:12.967402]: axis running: 0 [1970-Feb-23 00:52:13.013747]: axis running: 0 [1970-Feb-23 00:52:13.079776]: axis running: 0 [1970-Feb-23 00:52:13.188532]: axis running: 0 [1970-Feb-23 00:52:13.296601]: axis running: 0 [1970-Feb-23 00:52:13.358932]: axis running: 0 [1970-Feb-23 00:52:13.416508]: axis running: 0 [1970-Feb-23 00:52:13.461205]: axis running: 0 [1970-Feb-23 00:52:13.509010]: axis running: 0 [1970-Feb-23 00:52:13.564067]: axis running: 0 [1970-Feb-23 00:52:13.630758]: axis running: 0 [1970-Feb-23 00:52:13.676845]: axis running: 0 [1970-Feb-23 00:52:13.723911]: axis running: 0 [1970-Feb-23 00:52:13.787970]: axis running: 0 [1970-Feb-23 00:52:13.932040]: Last sync period had (0,135,2163) buffer fulls due to suspend moves [1970-Feb-23 00:52:13.933812]: Libstepper All Axis Abort [1970-Feb-23 00:52:13.935532]: Clear Toolhead Buffer [1970-Feb-23 00:52:13.954810]: clear toolhead buffer acknowledged [1970-Feb-23 00:52:14.036611]: toolhead unpausing [1970-Feb-23 00:52:14.038315]: quack pause: false [1970-Feb-23 00:52:14.146787]: Expend Buffer: true [1970-Feb-23 00:52:14.202900]: Last sync period had (0,135,2178) buffer fulls due to suspend moves [1970-Feb-23 00:52:14.204693]: Syncing turned false [1970-Feb-23 00:52:14.325480]: GAP: Query->Await [1970-Feb-23 00:52:14.349069]: TH0: Retreived step position 14156047 [1970-Feb-23 00:52:14.371390]: wait for PRU status in get position [1970-Feb-23 00:52:14.373200]: wait for PRU status in get position [1970-Feb-23 00:52:14.381931]: GAP: Await->Done(Query) [1970-Feb-23 00:52:14.598372]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:52:14.601797]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:52:19.641918]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:52:23.902530]: Last sync period had (0,135,2721) buffer fulls due to suspend moves [1970-Feb-23 00:52:23.904344]: Syncing turned false [1970-Feb-23 00:52:23.906078]: TH0: 49 failures in last 1797 packets (2.72677%) [1970-Feb-23 00:52:23.908003]: Toolhead Abort [1970-Feb-23 00:52:23.909825]: aborting pru with shutdown=true [1970-Feb-23 00:52:23.922985]: Last sync period had (0,135,2721) buffer fulls due to suspend moves [1970-Feb-23 00:52:23.924779]: Libstepper All Axis Abort [1970-Feb-23 00:52:23.926387]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:52:23.928081]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:52:24.038405]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:52:24.051679]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:52:24.139299]: Commanding stats update: Retract count: 2558006260 [1970-Feb-23 00:52:24.141504]: Toolhead 0 marked as possibly blocking! [1970-Feb-23 00:52:24.770799]: Toolhead 0 done blocking! [1970-Feb-23 00:52:24.905587]: GetToolUsageStats called in machine state 0 [1970-Feb-23 00:52:24.907455]: Commanding tool usage stat retrieve [1970-Feb-23 00:52:24.909111]: GetToolUsageState: Proceeds to 1 [1970-Feb-23 00:52:24.921070]: GetToolUsagState: Error from retrieve: 0x10a [1970-Feb-23 00:52:24.946958]: Raw usage stats: retract 821045222ct, extrusion 139289576 steps, 648296 seconds, refurbed 0 times [1970-Feb-23 00:52:25.010618]: GetToolUsageStats called in machine state 1 [1970-Feb-23 00:52:25.012369]: VerifyToolUsageStatsRetrieved: Done [1970-Feb-23 00:52:25.018156]: GetToolUsageState: Proceeds to 2 [1970-Feb-23 00:52:25.070406]: GetToolUsageStats called in machine state 2 [1970-Feb-23 00:52:25.072171]: GetToolUsageState: Done, resets [1970-Feb-23 00:53:16.962882]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:53:16.964778]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:53:18.239099]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:54:39.121902]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:54:42.240833]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:54:45.231514]: Raw HES proceeding [1970-Feb-23 00:54:45.261765]: Got raw val 18220, saturated: false [1970-Feb-23 00:54:45.281740]: Returning HES [1970-Feb-23 00:54:45.284436]: Sending back val 18220, saturated false [1970-Feb-23 00:54:45.376625]: Toolhead Abort [1970-Feb-23 00:54:45.379237]: aborting pru with shutdown=true [1970-Feb-23 00:54:45.390847]: Last sync period had (0,135,9135) buffer fulls due to suspend moves [1970-Feb-23 00:54:45.392741]: Libstepper All Axis Abort [1970-Feb-23 00:54:56.180298]: Toolhead 0 state error: 80 [1970-Feb-23 00:56:10.418671]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:56:10.423694]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:56:11.700483]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:56:17.204356]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:23.171530]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:28.264585]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:34.173419]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:39.298003]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:42.076144]: Toolhead 0 state error: 0 [1970-Feb-23 00:56:44.984056]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:50.152141]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:56:55.882295]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:57:00.703337]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:57:05.098272]: Raw HES proceeding [1970-Feb-23 00:57:05.137515]: Got raw val 18203, saturated: false [1970-Feb-23 00:57:05.170642]: Returning HES [1970-Feb-23 00:57:05.172365]: Sending back val 18203, saturated false [1970-Feb-23 00:57:05.290227]: Toolhead Abort [1970-Feb-23 00:57:05.292912]: aborting pru with shutdown=true [1970-Feb-23 00:57:05.295689]: Last sync period had (0,135,12699) buffer fulls due to suspend moves [1970-Feb-23 00:57:05.297618]: Libstepper All Axis Abort [1970-Feb-23 00:57:18.658094]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 00:57:18.659978]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:57:39.012024]: Heater manager Set Target Temperature to 180, index 0 [1970-Feb-23 00:57:39.014016]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:57:40.683737]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Feb-23 00:57:40.685716]: Load Sense Limit Method: 1 [1970-Feb-23 00:57:40.720568]: Last sync period had (0,135,12999) buffer fulls due to suspend moves [1970-Feb-23 00:57:40.722351]: Libstepper All Axis Abort [1970-Feb-23 00:57:42.998204]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:57:47.369746]: HOME: 1 homing: Limit Detected!: [1970-Feb-23 00:57:47.382628]: Toolhead Abort [1970-Feb-23 00:57:47.384340]: aborting pru with shutdown=true [1970-Feb-23 00:57:47.390478]: Last sync period had (0,135,13401) buffer fulls due to suspend moves [1970-Feb-23 00:57:47.392240]: Libstepper All Axis Abort [1970-Feb-23 00:57:47.511198]: HOME: 1 homing: Limit Detected!: [1970-Feb-23 00:57:48.658938]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:57:49.394419]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Feb-23 00:57:49.397205]: Load Sense Limit Method: 0 [1970-Feb-23 00:57:49.410546]: Last sync period had (0,135,13515) buffer fulls due to suspend moves [1970-Feb-23 00:57:49.412317]: Libstepper All Axis Abort [1970-Feb-23 00:57:54.943058]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:00.098402]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:03.674279]: HOME: 0 homing: Limit Detected!: [1970-Feb-23 00:58:03.676226]: Toolhead Abort [1970-Feb-23 00:58:03.677927]: aborting pru with shutdown=true [1970-Feb-23 00:58:03.718343]: Last sync period had (0,135,14319) buffer fulls due to suspend moves [1970-Feb-23 00:58:03.725267]: Libstepper All Axis Abort [1970-Feb-23 00:58:03.791481]: HOME: 0 homing: Limit Detected!: [1970-Feb-23 00:58:06.449264]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:06.546295]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Feb-23 00:58:11.020869]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:16.139936]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:20.547338]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:24.993397]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:27.841673]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:58:27.843602]: Toolhead Abort [1970-Feb-23 00:58:27.845309]: aborting pru with shutdown=false [1970-Feb-23 00:58:27.850818]: Last sync period had (0,135,15936) buffer fulls due to suspend moves [1970-Feb-23 00:58:27.852879]: Libstepper All Axis Abort [1970-Feb-23 00:58:27.899383]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:58:28.669320]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Feb-23 00:58:29.016178]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:29.289726]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:29.563116]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:29.829013]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:30.094444]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:30.369153]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:30.636274]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:30.903738]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:31.172965]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:31.441329]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:31.616628]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Feb-23 00:58:31.716608]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:32.000619]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:32.265231]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:58:32.430293]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:58:32.432223]: Toolhead Abort [1970-Feb-23 00:58:32.433923]: aborting pru with shutdown=false [1970-Feb-23 00:58:32.450798]: Last sync period had (0,135,16002) buffer fulls due to suspend moves [1970-Feb-23 00:58:32.452572]: Libstepper All Axis Abort [1970-Feb-23 00:58:32.490904]: HOME: 2 homing: Limit Detected!: [1970-Feb-23 00:58:32.744213]: GAP: Query->Await [1970-Feb-23 00:58:32.769804]: TH0: Retreived step position 11731215 [1970-Feb-23 00:58:32.788667]: wait for PRU status in get position [1970-Feb-23 00:58:32.790546]: wait for PRU status in get position [1970-Feb-23 00:58:32.792161]: GAP: Await->Done(Query) [1970-Feb-23 00:58:33.015678]: Heater manager Set Target Temperature to 180, index 0 [1970-Feb-23 00:58:33.017417]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:58:33.898928]: Expecting 806072 steps extruded this print from 7425.81 mm of plastic [1970-Feb-23 00:58:34.042308]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 00:58:34.044215]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 00:58:34.129633]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 0xf3,0x0,0x0,0x21,0x0,0xb3,0x0,0xf,0x40,0xf7,0x1,0x0,0xb4,0x0,0x0,0x98,0x31,0x3,0x4a,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x18,0xf6,0xf2,0x58,0xb4, [1970-Feb-23 00:58:34.131768]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:58:34.136955]: Toolhead 0: Unsupported Command [1970-Feb-23 00:58:34.202192]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 00:59:47.372149]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 00:59:50.804932]: Expend Buffer: false [1970-Feb-23 00:59:50.911413]: Syncing turned true [1970-Feb-23 00:59:50.994039]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 00:59:50.995900]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 00:59:51.325578]: Toolhead 0 ADC Error: 1 [1970-Feb-23 00:59:51.378900]: Expected packet id: 0xb3, Got packet id: 0xb2, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4b,0x90,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x2,0xc8,0x0,0xb2,0x31,0xb3,0xd7,0x7f, [1970-Feb-23 00:59:51.381158]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:59:51.386724]: Expected packet id: 0xb3, Got packet id: 0xb2, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4b,0x90,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x2,0xc8,0x0,0xb2,0x31,0xb3,0xd7,0x7f, [1970-Feb-23 00:59:51.388629]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Feb-23 00:59:51.535304]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 00:59:51.537034]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 00:59:51.538773]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 00:59:51.541780]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 00:59:51.548007]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 00:59:51.549800]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 00:59:51.799245]: Expected packet id: 0xec, Got packet id: 0xeb, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4b,0x90,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x3d,0x26,0x0,0xeb,0x28,0x30,0x2b,0x72, [1970-Feb-23 00:59:51.801978]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:59:52.268501]: Expected packet id: 0x3b, Got packet id: 0x3a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4b,0x90,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x1c,0xea,0x0,0x3a,0x59,0xdf,0x6e,0x4f, [1970-Feb-23 00:59:52.272181]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:59:52.506584]: Expected packet id: 0x58, Got packet id: 0x57, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4b,0x90,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0xc,0x9c,0x0,0x57,0x6a,0xb9,0x30,0xd7, [1970-Feb-23 00:59:52.508489]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 00:59:55.550341]: Toolhead 0 state error: 81 [1970-Feb-23 00:59:57.098429]: toolhead pausing [1970-Feb-23 00:59:57.100360]: Toolhead 0 : Retry: Waited 1.54784s from state change [1970-Feb-23 00:59:57.104932]: Last sync period had (0,141,2031) buffer fulls due to suspend moves [1970-Feb-23 00:59:57.106694]: Syncing turned false [1970-Feb-23 00:59:57.108343]: quack pause: true [1970-Feb-23 00:59:57.153657]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 00:59:57.193758]: axis running: 0 [1970-Feb-23 00:59:57.356124]: axis running: 0 [1970-Feb-23 00:59:57.422816]: axis running: 0 [1970-Feb-23 00:59:57.479047]: axis running: 0 [1970-Feb-23 00:59:57.538871]: axis running: 0 [1970-Feb-23 00:59:57.613130]: axis running: 0 [1970-Feb-23 00:59:57.685256]: axis running: 0 [1970-Feb-23 00:59:57.733767]: axis running: 0 [1970-Feb-23 00:59:57.803763]: axis running: 0 [1970-Feb-23 00:59:57.941026]: axis running: 0 [1970-Feb-23 00:59:57.992724]: axis running: 0 [1970-Feb-23 00:59:58.056013]: axis running: 0 [1970-Feb-23 00:59:58.109787]: axis running: 0 [1970-Feb-23 00:59:58.211360]: Toolhead 0 state error: 0 [1970-Feb-23 00:59:58.275804]: Last sync period had (0,141,2031) buffer fulls due to suspend moves [1970-Feb-23 00:59:58.278249]: Libstepper All Axis Abort [1970-Feb-23 00:59:58.290342]: Clear Toolhead Buffer [1970-Feb-23 00:59:58.311878]: clear toolhead buffer acknowledged [1970-Feb-23 00:59:58.389397]: toolhead unpausing [1970-Feb-23 00:59:58.401547]: quack pause: false [1970-Feb-23 00:59:58.552257]: Expend Buffer: true [1970-Feb-23 00:59:58.610529]: Last sync period had (0,141,2049) buffer fulls due to suspend moves [1970-Feb-23 00:59:58.612749]: Syncing turned false [1970-Feb-23 00:59:58.753414]: Toolhead 0 ADC Error: 0 [1970-Feb-23 00:59:58.793802]: GAP: Query->Await [1970-Feb-23 00:59:58.832828]: TH0: Retreived step position 14221583 [1970-Feb-23 00:59:58.871681]: wait for PRU status in get position [1970-Feb-23 00:59:58.873423]: wait for PRU status in get position [1970-Feb-23 00:59:58.875067]: GAP: Await->Done(Query) [1970-Feb-23 00:59:58.995658]: Suspend [1970-Feb-23 00:59:58.997577]: Suspend index 10 found, A-pos 15.0027 [1970-Feb-23 01:00:03.020317]: GAP: Query->Await [1970-Feb-23 01:00:03.031948]: TH0: Retreived step position 14221583 [1970-Feb-23 01:00:03.051346]: wait for PRU status in get position [1970-Feb-23 01:00:03.062944]: wait for PRU status in get position [1970-Feb-23 01:00:03.064624]: GAP: Await->Done(Query) [1970-Feb-23 01:00:03.824965]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:00:03.826807]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:00:04.311084]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:00:06.622271]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:00:08.410653]: Expend Buffer: false [1970-Feb-23 01:00:08.522944]: Syncing turned true [1970-Feb-23 01:00:08.545401]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 01:00:08.547094]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 01:00:08.951746]: Toolhead 0 ADC Error: 1 [1970-Feb-23 01:00:09.704274]: Expected packet id: 0x4e, Got packet id: 0x4d, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x51,0xe5,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x1,0xd9,0xcc,0x0,0x4d,0x26,0xff,0x42,0x24, [1970-Feb-23 01:00:09.706158]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 01:00:09.788440]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 01:00:09.790364]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 01:00:09.792738]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 01:00:09.794428]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 01:00:09.796092]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 01:00:09.797821]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 01:00:10.935427]: Expend Buffer: false [1970-Feb-23 01:00:24.023564]: Toolhead 0 state error: 81 [1970-Feb-23 01:00:25.575669]: toolhead pausing [1970-Feb-23 01:00:25.577524]: Toolhead 0 : Retry: Waited 1.55212s from state change [1970-Feb-23 01:00:25.582049]: Last sync period had (0,132,1755) buffer fulls due to suspend moves [1970-Feb-23 01:00:25.583947]: Syncing turned false [1970-Feb-23 01:00:25.585596]: quack pause: true [1970-Feb-23 01:00:25.632780]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 01:00:25.673506]: axis running: 0 [1970-Feb-23 01:00:25.831754]: axis running: 0 [1970-Feb-23 01:00:25.893641]: axis running: 0 [1970-Feb-23 01:00:25.945953]: axis running: 0 [1970-Feb-23 01:00:26.017058]: axis running: 0 [1970-Feb-23 01:00:26.080726]: axis running: 0 [1970-Feb-23 01:00:26.142875]: axis running: 0 [1970-Feb-23 01:00:26.206552]: axis running: 0 [1970-Feb-23 01:00:26.268127]: axis running: 0 [1970-Feb-23 01:00:26.395483]: axis running: 0 [1970-Feb-23 01:00:26.460688]: axis running: 0 [1970-Feb-23 01:00:26.531906]: axis running: 0 [1970-Feb-23 01:00:26.592017]: axis running: 0 [1970-Feb-23 01:00:26.646644]: axis running: 0 [1970-Feb-23 01:00:26.705364]: axis running: 0 [1970-Feb-23 01:00:26.766838]: axis running: 0 [1970-Feb-23 01:00:26.834860]: axis running: 0 [1970-Feb-23 01:00:26.953959]: axis running: 0 [1970-Feb-23 01:00:27.008801]: axis running: 0 [1970-Feb-23 01:00:27.088158]: axis running: 0 [1970-Feb-23 01:00:27.158616]: axis running: 0 [1970-Feb-23 01:00:27.283697]: axis running: 0 [1970-Feb-23 01:00:27.364812]: axis running: 0 [1970-Feb-23 01:00:27.433933]: axis running: 0 [1970-Feb-23 01:00:27.562078]: axis running: 0 [1970-Feb-23 01:00:27.620739]: axis running: 0 [1970-Feb-23 01:00:27.694751]: axis running: 0 [1970-Feb-23 01:00:27.752388]: axis running: 0 [1970-Feb-23 01:00:27.815760]: axis running: 0 [1970-Feb-23 01:00:27.886482]: axis running: 0 [1970-Feb-23 01:00:27.955738]: axis running: 0 [1970-Feb-23 01:00:27.999421]: axis running: 0 [1970-Feb-23 01:00:28.036292]: Toolhead 0 state error: 0 [1970-Feb-23 01:00:28.225370]: Last sync period had (0,132,1755) buffer fulls due to suspend moves [1970-Feb-23 01:00:28.227828]: Libstepper All Axis Abort [1970-Feb-23 01:00:28.229544]: Clear Toolhead Buffer [1970-Feb-23 01:00:28.251473]: clear toolhead buffer acknowledged [1970-Feb-23 01:00:28.348155]: toolhead unpausing [1970-Feb-23 01:00:28.349834]: quack pause: false [1970-Feb-23 01:00:28.446005]: Expend Buffer: true [1970-Feb-23 01:00:28.498672]: Last sync period had (0,132,1770) buffer fulls due to suspend moves [1970-Feb-23 01:00:28.504793]: Syncing turned false [1970-Feb-23 01:00:28.592883]: Toolhead 0 ADC Error: 0 [1970-Feb-23 01:00:28.633194]: GAP: Query->Await [1970-Feb-23 01:00:28.667209]: TH0: Retreived step position 14156047 [1970-Feb-23 01:00:28.748806]: wait for PRU status in get position [1970-Feb-23 01:00:28.758061]: wait for PRU status in get position [1970-Feb-23 01:00:28.759852]: GAP: Await->Done(Query) [1970-Feb-23 01:00:28.908716]: Suspend [1970-Feb-23 01:00:28.920763]: Suspend index 12 found, A-pos 39.5902 [1970-Feb-23 01:00:33.302549]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:00:33.725518]: GAP: Query->Await [1970-Feb-23 01:00:33.747883]: TH0: Retreived step position 14024975 [1970-Feb-23 01:00:33.788739]: wait for PRU status in get position [1970-Feb-23 01:00:33.790864]: wait for PRU status in get position [1970-Feb-23 01:00:33.792519]: GAP: Await->Done(Query) [1970-Feb-23 01:00:34.569928]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:00:34.588814]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:00:35.142409]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:00:39.131649]: Expend Buffer: false [1970-Feb-23 01:00:39.200473]: Syncing turned true [1970-Feb-23 01:00:39.223238]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 01:00:39.224937]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 01:00:39.683942]: Toolhead 0 ADC Error: 1 [1970-Feb-23 01:00:40.348232]: Expected packet id: 0x96, Got packet id: 0x95, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x5c,0x4a,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0xbf,0xd8,0x0,0x95,0xd3,0x6e,0x24,0xce, [1970-Feb-23 01:00:40.350343]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 01:00:40.407559]: Expected packet id: 0xa5, Got packet id: 0xa4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x5c,0x4a,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0xbb,0xc2,0x0,0xa4,0x1c,0x63,0x95,0x5, [1970-Feb-23 01:00:40.409443]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 01:00:40.510234]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 01:00:40.511959]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 01:00:40.513738]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 01:00:40.515403]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 01:00:40.518300]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 01:00:40.520346]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 01:00:40.941549]: Expected packet id: 0x5, Got packet id: 0x4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x5c,0x4a,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x97,0x11,0x0,0x4,0xaf,0x9e,0xad,0x2, [1970-Feb-23 01:00:40.943577]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 01:00:41.217381]: Expected packet id: 0x47, Got packet id: 0x46, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x5c,0x4a,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x84,0x2f,0x0,0x46,0x5b,0x15,0xbd,0x55, [1970-Feb-23 01:00:41.219302]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 01:00:41.625204]: Expend Buffer: false [1970-Feb-23 01:00:53.180430]: Toolhead 0 state error: 81 [1970-Feb-23 01:00:54.726505]: toolhead pausing [1970-Feb-23 01:00:54.728353]: Toolhead 0 : Retry: Waited 1.54286s from state change [1970-Feb-23 01:00:54.733089]: Last sync period had (0,132,1752) buffer fulls due to suspend moves [1970-Feb-23 01:00:54.734833]: Syncing turned false [1970-Feb-23 01:00:54.736583]: quack pause: true [1970-Feb-23 01:00:54.845241]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 01:00:54.886663]: axis running: 0 [1970-Feb-23 01:00:55.043440]: axis running: 0 [1970-Feb-23 01:00:55.105964]: axis running: 0 [1970-Feb-23 01:00:55.171167]: axis running: 0 [1970-Feb-23 01:00:55.231496]: axis running: 0 [1970-Feb-23 01:00:55.305002]: axis running: 0 [1970-Feb-23 01:00:55.354967]: axis running: 0 [1970-Feb-23 01:00:55.409945]: axis running: 0 [1970-Feb-23 01:00:55.469046]: axis running: 0 [1970-Feb-23 01:00:55.602573]: axis running: 0 [1970-Feb-23 01:00:55.659790]: axis running: 0 [1970-Feb-23 01:00:55.724663]: axis running: 0 [1970-Feb-23 01:00:55.786053]: axis running: 0 [1970-Feb-23 01:00:55.855106]: axis running: 0 [1970-Feb-23 01:00:55.905754]: axis running: 0 [1970-Feb-23 01:00:55.966705]: axis running: 0 [1970-Feb-23 01:00:56.015785]: axis running: 0 [1970-Feb-23 01:00:56.108263]: axis running: 0 [1970-Feb-23 01:00:56.217703]: axis running: 0 [1970-Feb-23 01:00:56.273363]: axis running: 0 [1970-Feb-23 01:00:56.387860]: axis running: 0 [1970-Feb-23 01:00:56.470275]: axis running: 0 [1970-Feb-23 01:00:56.532459]: axis running: 0 [1970-Feb-23 01:00:56.605665]: axis running: 0 [1970-Feb-23 01:00:56.691789]: axis running: 0 [1970-Feb-23 01:00:56.799153]: axis running: 0 [1970-Feb-23 01:00:56.864297]: axis running: 0 [1970-Feb-23 01:00:56.925384]: axis running: 0 [1970-Feb-23 01:00:56.984241]: axis running: 0 [1970-Feb-23 01:00:57.038151]: axis running: 0 [1970-Feb-23 01:00:57.127999]: axis running: 0 [1970-Feb-23 01:00:57.201101]: axis running: 0 [1970-Feb-23 01:00:57.275510]: axis running: 0 [1970-Feb-23 01:00:57.400403]: axis running: 0 [1970-Feb-23 01:00:57.478459]: axis running: 0 [1970-Feb-23 01:00:57.620898]: axis running: 0 [1970-Feb-23 01:00:57.748326]: axis running: 0 [1970-Feb-23 01:00:57.945520]: axis running: 0 [1970-Feb-23 01:00:58.308990]: axis running: 0 [1970-Feb-23 01:00:58.385943]: axis running: 0 [1970-Feb-23 01:00:58.461790]: axis running: 0 [1970-Feb-23 01:00:58.514843]: axis running: 0 [1970-Feb-23 01:00:58.593850]: axis running: 0 [1970-Feb-23 01:00:58.698636]: axis running: 0 [1970-Feb-23 01:00:58.766012]: axis running: 0 [1970-Feb-23 01:00:58.829915]: axis running: 0 [1970-Feb-23 01:00:58.895641]: axis running: 0 [1970-Feb-23 01:00:58.953552]: axis running: 0 [1970-Feb-23 01:00:59.020606]: axis running: 0 [1970-Feb-23 01:00:59.081193]: axis running: 0 [1970-Feb-23 01:00:59.145597]: axis running: 0 [1970-Feb-23 01:00:59.199645]: axis running: 0 [1970-Feb-23 01:00:59.326506]: axis running: 0 [1970-Feb-23 01:00:59.395392]: axis running: 0 [1970-Feb-23 01:00:59.447114]: axis running: 0 [1970-Feb-23 01:00:59.497988]: axis running: 0 [1970-Feb-23 01:00:59.577020]: axis running: 0 [1970-Feb-23 01:00:59.639600]: axis running: 0 [1970-Feb-23 01:00:59.699596]: axis running: 0 [1970-Feb-23 01:00:59.802655]: axis running: 0 [1970-Feb-23 01:00:59.941040]: axis running: 0 [1970-Feb-23 01:01:00.003951]: axis running: 0 [1970-Feb-23 01:01:00.062593]: axis running: 0 [1970-Feb-23 01:01:00.141643]: axis running: 0 [1970-Feb-23 01:01:00.192707]: axis running: 0 [1970-Feb-23 01:01:00.239279]: axis running: 0 [1970-Feb-23 01:01:00.311887]: axis running: 0 [1970-Feb-23 01:01:00.369385]: axis running: 0 [1970-Feb-23 01:01:00.447108]: axis running: 0 [1970-Feb-23 01:01:00.547880]: axis running: 0 [1970-Feb-23 01:01:00.612571]: axis running: 0 [1970-Feb-23 01:01:00.681853]: axis running: 0 [1970-Feb-23 01:01:00.743613]: axis running: 0 [1970-Feb-23 01:01:00.810657]: axis running: 0 [1970-Feb-23 01:01:00.871650]: axis running: 0 [1970-Feb-23 01:01:00.929871]: axis running: 0 [1970-Feb-23 01:01:00.995146]: axis running: 0 [1970-Feb-23 01:01:01.060915]: axis running: 0 [1970-Feb-23 01:01:01.168885]: axis running: 0 [1970-Feb-23 01:01:01.227071]: axis running: 0 [1970-Feb-23 01:01:01.293322]: axis running: 0 [1970-Feb-23 01:01:01.413420]: axis running: 0 [1970-Feb-23 01:01:01.482074]: axis running: 0 [1970-Feb-23 01:01:01.542761]: axis running: 0 [1970-Feb-23 01:01:01.618929]: axis running: 0 [1970-Feb-23 01:01:01.679895]: axis running: 0 [1970-Feb-23 01:01:01.799007]: axis running: 0 [1970-Feb-23 01:01:01.873259]: axis running: 0 [1970-Feb-23 01:01:01.918690]: axis running: 0 [1970-Feb-23 01:01:01.990940]: axis running: 0 [1970-Feb-23 01:01:02.041188]: axis running: 0 [1970-Feb-23 01:01:02.109924]: axis running: 0 [1970-Feb-23 01:01:02.173831]: axis running: 0 [1970-Feb-23 01:01:02.239962]: axis running: 0 [1970-Feb-23 01:01:02.373560]: axis running: 0 [1970-Feb-23 01:01:02.429503]: axis running: 0 [1970-Feb-23 01:01:02.494448]: axis running: 0 [1970-Feb-23 01:01:02.549534]: axis running: 0 [1970-Feb-23 01:01:02.615728]: axis running: 0 [1970-Feb-23 01:01:02.680937]: axis running: 0 [1970-Feb-23 01:01:02.736745]: axis running: 0 [1970-Feb-23 01:01:02.799977]: axis running: 0 [1970-Feb-23 01:01:02.890738]: axis running: 0 [1970-Feb-23 01:01:03.018313]: axis running: 0 [1970-Feb-23 01:01:03.102864]: axis running: 0 [1970-Feb-23 01:01:03.174113]: axis running: 0 [1970-Feb-23 01:01:03.228029]: axis running: 0 [1970-Feb-23 01:01:03.289498]: axis running: 0 [1970-Feb-23 01:01:03.363974]: axis running: 0 [1970-Feb-23 01:01:03.429251]: axis running: 0 [1970-Feb-23 01:01:03.491865]: axis running: 0 [1970-Feb-23 01:01:03.588462]: axis running: 0 [1970-Feb-23 01:01:03.670295]: axis running: 0 [1970-Feb-23 01:01:03.716600]: axis running: 0 [1970-Feb-23 01:01:03.781256]: axis running: 0 [1970-Feb-23 01:01:03.840238]: axis running: 0 [1970-Feb-23 01:01:03.911095]: axis running: 0 [1970-Feb-23 01:01:03.973447]: axis running: 0 [1970-Feb-23 01:01:04.033664]: axis running: 0 [1970-Feb-23 01:01:04.105432]: axis running: 0 [1970-Feb-23 01:01:04.229450]: axis running: 0 [1970-Feb-23 01:01:04.279864]: axis running: 0 [1970-Feb-23 01:01:04.354576]: axis running: 0 [1970-Feb-23 01:01:04.421407]: axis running: 0 [1970-Feb-23 01:01:04.494238]: axis running: 0 [1970-Feb-23 01:01:04.555882]: axis running: 0 [1970-Feb-23 01:01:04.671333]: axis running: 0 [1970-Feb-23 01:01:04.749228]: axis running: 0 [1970-Feb-23 01:01:04.891668]: axis running: 0 [1970-Feb-23 01:01:04.954879]: axis running: 0 [1970-Feb-23 01:01:05.009987]: axis running: 0 [1970-Feb-23 01:01:05.174153]: Last sync period had (0,132,1752) buffer fulls due to suspend moves [1970-Feb-23 01:01:05.176540]: Libstepper All Axis Abort [1970-Feb-23 01:01:05.178268]: Clear Toolhead Buffer [1970-Feb-23 01:01:05.207088]: Toolhead 0 state error: 0 [1970-Feb-23 01:01:05.208889]: clear toolhead buffer acknowledged [1970-Feb-23 01:01:05.304024]: toolhead unpausing [1970-Feb-23 01:01:05.305786]: quack pause: false [1970-Feb-23 01:01:05.456903]: Expend Buffer: true [1970-Feb-23 01:01:05.506878]: Last sync period had (0,132,1770) buffer fulls due to suspend moves [1970-Feb-23 01:01:05.508715]: Syncing turned false [1970-Feb-23 01:01:05.602662]: Toolhead 0 ADC Error: 0 [1970-Feb-23 01:01:05.640531]: GAP: Query->Await [1970-Feb-23 01:01:05.662833]: TH0: Retreived step position 14090511 [1970-Feb-23 01:01:05.702230]: wait for PRU status in get position [1970-Feb-23 01:01:05.704038]: wait for PRU status in get position [1970-Feb-23 01:01:05.705700]: GAP: Await->Done(Query) [1970-Feb-23 01:01:05.817471]: Suspend [1970-Feb-23 01:01:05.819252]: Suspend index 14 found, A-pos 72.962 [1970-Feb-23 01:01:09.863044]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:01:11.686981]: GAP: Query->Await [1970-Feb-23 01:01:11.722824]: TH0: Retreived step position 14221583 [1970-Feb-23 01:01:11.764720]: wait for PRU status in get position [1970-Feb-23 01:01:11.766519]: wait for PRU status in get position [1970-Feb-23 01:01:11.768175]: GAP: Await->Done(Query) [1970-Feb-23 01:01:12.517281]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:01:12.519065]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:01:13.009869]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:01:17.173328]: Expend Buffer: false [1970-Feb-23 01:01:17.251877]: Syncing turned true [1970-Feb-23 01:01:17.275588]: PRU Event: PRU_SYNC_ON(7) [1970-Feb-23 01:01:17.277459]: PRU Event: PRU_SYNC_DELAY(6) [1970-Feb-23 01:01:17.652712]: Toolhead 0 ADC Error: 1 [1970-Feb-23 01:01:18.478233]: Expected packet id: 0x8, Got packet id: 0x7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xda,0x0,0xf,0x6a,0x6a,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x3,0xeb,0xc,0x0,0x7,0x8b,0xe,0xdb,0xbc, [1970-Feb-23 01:01:18.480470]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Feb-23 01:01:18.525831]: PRU Event: PRU_SYNC_DELAY(5) [1970-Feb-23 01:01:18.527528]: PRU Event: PRU_SYNC_DELAY(4) [1970-Feb-23 01:01:18.529849]: PRU Event: PRU_SYNC_DELAY(3) [1970-Feb-23 01:01:18.531819]: PRU Event: PRU_SYNC_DELAY(2) [1970-Feb-23 01:01:18.533545]: PRU Event: PRU_SYNC_DELAY(1) [1970-Feb-23 01:01:18.535197]: PRU Event: PRU_SYNC_DELAY(0) [1970-Feb-23 01:01:19.634103]: Expend Buffer: false [1970-Feb-23 01:01:38.731891]: Toolhead 0 state error: 81 [1970-Feb-23 01:01:40.262914]: Toolhead 0 : Retry: Waited 1.51673s from state change [1970-Feb-23 01:01:40.311325]: toolhead pausing [1970-Feb-23 01:01:40.316280]: Last sync period had (0,132,1761) buffer fulls due to suspend moves [1970-Feb-23 01:01:40.318011]: Syncing turned false [1970-Feb-23 01:01:40.319755]: quack pause: true [1970-Feb-23 01:01:40.372981]: PRU Event: PRU_SYNC_OFF(0) [1970-Feb-23 01:01:40.481015]: axis running: 0 [1970-Feb-23 01:01:40.543254]: axis running: 0 [1970-Feb-23 01:01:40.597074]: axis running: 0 [1970-Feb-23 01:01:40.671232]: axis running: 0 [1970-Feb-23 01:01:40.733372]: axis running: 0 [1970-Feb-23 01:01:40.795436]: axis running: 0 [1970-Feb-23 01:01:40.853393]: axis running: 0 [1970-Feb-23 01:01:40.919897]: axis running: 0 [1970-Feb-23 01:01:41.047013]: axis running: 0 [1970-Feb-23 01:01:41.105048]: axis running: 0 [1970-Feb-23 01:01:41.181033]: axis running: 0 [1970-Feb-23 01:01:41.239595]: axis running: 0 [1970-Feb-23 01:01:41.306539]: axis running: 0 [1970-Feb-23 01:01:41.384254]: axis running: 0 [1970-Feb-23 01:01:41.451220]: axis running: 0 [1970-Feb-23 01:01:41.505967]: axis running: 0 [1970-Feb-23 01:01:41.637473]: axis running: 0 [1970-Feb-23 01:01:41.711522]: axis running: 0 [1970-Feb-23 01:01:41.782017]: axis running: 0 [1970-Feb-23 01:01:41.853667]: axis running: 0 [1970-Feb-23 01:01:41.917262]: axis running: 0 [1970-Feb-23 01:01:42.035464]: axis running: 0 [1970-Feb-23 01:01:42.112546]: axis running: 0 [1970-Feb-23 01:01:42.260657]: axis running: 0 [1970-Feb-23 01:01:42.331585]: axis running: 0 [1970-Feb-23 01:01:42.382065]: axis running: 0 [1970-Feb-23 01:01:42.414886]: axis running: 0 [1970-Feb-23 01:01:42.446761]: axis running: 0 [1970-Feb-23 01:01:42.499988]: axis running: 0 [1970-Feb-23 01:01:42.534095]: axis running: 0 [1970-Feb-23 01:01:42.566824]: axis running: 0 [1970-Feb-23 01:01:42.619607]: axis running: 0 [1970-Feb-23 01:01:42.657033]: axis running: 0 [1970-Feb-23 01:01:42.691297]: axis running: 0 [1970-Feb-23 01:01:42.775719]: axis running: 0 [1970-Feb-23 01:01:42.810468]: axis running: 0 [1970-Feb-23 01:01:42.842110]: axis running: 0 [1970-Feb-23 01:01:42.898612]: axis running: 0 [1970-Feb-23 01:01:42.937600]: axis running: 0 [1970-Feb-23 01:01:42.971321]: axis running: 0 [1970-Feb-23 01:01:43.016327]: axis running: 0 [1970-Feb-23 01:01:43.054486]: axis running: 0 [1970-Feb-23 01:01:43.106120]: axis running: 0 [1970-Feb-23 01:01:43.219095]: axis running: 0 [1970-Feb-23 01:01:43.368731]: axis running: 0 [1970-Feb-23 01:01:43.708516]: axis running: 0 [1970-Feb-23 01:01:43.962412]: axis running: 0 [1970-Feb-23 01:01:44.029569]: axis running: 0 [1970-Feb-23 01:01:44.098773]: axis running: 0 [1970-Feb-23 01:01:44.156158]: axis running: 0 [1970-Feb-23 01:01:44.191249]: axis running: 0 [1970-Feb-23 01:01:44.223956]: axis running: 0 [1970-Feb-23 01:01:44.265561]: axis running: 0 [1970-Feb-23 01:01:44.310525]: axis running: 0 [1970-Feb-23 01:01:44.341843]: axis running: 0 [1970-Feb-23 01:01:44.378822]: axis running: 0 [1970-Feb-23 01:01:44.442155]: Toolhead 0 state error: 0 [1970-Feb-23 01:01:44.477979]: Last sync period had (0,132,1761) buffer fulls due to suspend moves [1970-Feb-23 01:01:44.480627]: Libstepper All Axis Abort [1970-Feb-23 01:01:44.482370]: Clear Toolhead Buffer [1970-Feb-23 01:01:44.494464]: clear toolhead buffer acknowledged [1970-Feb-23 01:01:44.560178]: toolhead unpausing [1970-Feb-23 01:01:44.561892]: quack pause: false [1970-Feb-23 01:01:44.662996]: Expend Buffer: true [1970-Feb-23 01:01:44.701155]: Last sync period had (0,132,1779) buffer fulls due to suspend moves [1970-Feb-23 01:01:44.703040]: Syncing turned false [1970-Feb-23 01:01:44.744292]: Toolhead 0 ADC Error: 0 [1970-Feb-23 01:01:44.765104]: GAP: Query->Await [1970-Feb-23 01:01:44.776852]: TH0: Retreived step position 13893903 [1970-Feb-23 01:01:44.815869]: wait for PRU status in get position [1970-Feb-23 01:01:44.817549]: wait for PRU status in get position [1970-Feb-23 01:01:44.819247]: GAP: Await->Done(Query) [1970-Feb-23 01:01:44.873934]: Suspend [1970-Feb-23 01:01:44.875746]: Suspend index 16 found, A-pos 97.1897 [1970-Feb-23 01:01:45.965214]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:01:49.597704]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:01:49.863310]: GAP: Query->Await [1970-Feb-23 01:01:49.875217]: TH0: Retreived step position 13893903 [1970-Feb-23 01:01:49.901341]: wait for PRU status in get position [1970-Feb-23 01:01:49.903152]: wait for PRU status in get position [1970-Feb-23 01:01:49.904796]: GAP: Await->Done(Query) [1970-Feb-23 01:02:44.493360]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:02:44.495154]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:02:44.982540]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:03:22.828667]: Toolhead 0 state error: 80 [1970-Feb-23 01:04:43.974467]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:04:43.976265]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:04:44.459008]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:04:51.470597]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:04:57.131074]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:03.554396]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:09.355068]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:16.060944]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:21.761744]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:28.106292]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:33.858981]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:40.351314]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:05:40.353241]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:05:40.439980]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:05:47.764918]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:05:53.295062]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:00.063934]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:05.796689]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:12.273395]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:18.122190]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:24.533901]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:30.251113]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:36.744254]: Heater manager Set Target Temperature to 215, index 0 [1970-Feb-23 01:06:36.746060]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:06:36.848438]: wait for heaters at target, wait bitmask 0x1 [1970-Feb-23 01:06:43.908862]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:49.626668]: Toolhead 0 state error: 0 [1970-Feb-23 01:06:49.734628]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Feb-23 01:06:56.140980]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:07:01.793490]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:07:08.397341]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:07:14.288436]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:07:20.462446]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:07:26.171350]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:09:49.521212]: Toolhead 0 state error: 56 [1970-Feb-23 01:09:50.329333]: Toolhead 0 state error: 0 [1970-Feb-23 01:10:48.473935]: toolhead pausing [1970-Feb-23 01:10:48.482812]: Last sync period had (0,132,19224) buffer fulls due to suspend moves [1970-Feb-23 01:10:48.484606]: Syncing turned false [1970-Feb-23 01:10:48.486400]: quack pause: true [1970-Feb-23 01:10:48.740792]: Last sync period had (0,132,19233) buffer fulls due to suspend moves [1970-Feb-23 01:10:48.742730]: Libstepper All Axis Abort [1970-Feb-23 01:10:48.744468]: Clear Toolhead Buffer [1970-Feb-23 01:10:48.802677]: clear toolhead buffer acknowledged [1970-Feb-23 01:10:48.889781]: toolhead unpausing [1970-Feb-23 01:10:48.901924]: quack pause: false [1970-Feb-23 01:10:49.018358]: Expend Buffer: true [1970-Feb-23 01:10:49.067000]: Last sync period had (0,132,19248) buffer fulls due to suspend moves [1970-Feb-23 01:10:49.068976]: Syncing turned false [1970-Feb-23 01:10:49.224574]: GAP: Query->Await [1970-Feb-23 01:10:49.267819]: TH0: Retreived step position 11534607 [1970-Feb-23 01:10:49.298862]: wait for PRU status in get position [1970-Feb-23 01:10:49.309294]: wait for PRU status in get position [1970-Feb-23 01:10:49.311999]: GAP: Await->Done(Query) [1970-Feb-23 01:10:49.460620]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 01:10:49.462450]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:10:53.419390]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Feb-23 01:10:58.874800]: Last sync period had (0,132,19791) buffer fulls due to suspend moves [1970-Feb-23 01:10:58.876601]: Syncing turned false [1970-Feb-23 01:10:58.879142]: TH0: 93 failures in last 3274 packets (2.84056%) [1970-Feb-23 01:10:58.891441]: Toolhead Abort [1970-Feb-23 01:10:58.901283]: aborting pru with shutdown=true [1970-Feb-23 01:10:58.904024]: Last sync period had (0,132,19791) buffer fulls due to suspend moves [1970-Feb-23 01:10:58.905803]: Libstepper All Axis Abort [1970-Feb-23 01:10:58.907652]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 01:10:58.909343]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:10:59.016647]: Heater manager Set Target Temperature to 0, index 0 [1970-Feb-23 01:10:59.018427]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Feb-23 01:10:59.097057]: Commanding stats update: Retract count: 821045222 [1970-Feb-23 01:10:59.098909]: Toolhead 0 marked as possibly blocking! [1970-Feb-23 01:10:59.692337]: Toolhead 0 done blocking! [1970-Feb-23 01:10:59.873534]: GetToolUsageStats called in machine state 0 [1970-Feb-23 01:10:59.875285]: Commanding tool usage stat retrieve [1970-Feb-23 01:10:59.876939]: GetToolUsageState: Proceeds to 1 [1970-Feb-23 01:10:59.878687]: GetToolUsagState: Error from retrieve: 0x10a [1970-Feb-23 01:10:59.911605]: Raw usage stats: retract 1642090444ct, extrusion 139444795 steps, 648550 seconds, refurbed 0 times [1970-Feb-23 01:10:59.929294]: GetToolUsageStats called in machine state 1 [1970-Feb-23 01:10:59.936107]: VerifyToolUsageStatsRetrieved: Done [1970-Feb-23 01:10:59.937755]: GetToolUsageState: Proceeds to 2 [1970-Feb-23 01:10:59.996988]: GetToolUsageStats called in machine state 2 [1970-Feb-23 01:11:00.011116]: GetToolUsageState: Done, resets [1970-Jul-18 00:26:50.909987]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-18 00:26:50.922147]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-18 00:26:52.191180]: wait for heaters at target, wait bitmask 0x1 [1970-Jul-18 00:29:55.341852]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-18 00:29:58.493957]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-18 00:30:01.778384]: Raw HES proceeding [1970-Jul-18 00:30:01.813972]: Got raw val 18614, saturated: false [1970-Jul-18 00:30:01.829586]: Returning HES [1970-Jul-18 00:30:01.831472]: Sending back val 18614, saturated false [1970-Jul-18 00:30:01.941228]: Toolhead Abort [1970-Jul-18 00:30:01.942965]: aborting pru with shutdown=true [1970-Jul-18 00:30:01.945812]: Last sync period had (0,132,74647260) buffer fulls due to suspend moves [1970-Jul-18 00:30:01.947591]: Libstepper All Axis Abort [1970-Jul-18 00:30:11.909575]: Toolhead 0 state error: 80 [1970-Jul-18 00:32:58.012912]: Toolhead 0 state error: 56 [1970-Jul-18 00:33:00.025021]: Toolhead 0 state error: 80 [1970-Oct-05 19:05:55.605615]: Toolhead 0 state error: 54 [1970-Oct-05 19:05:55.607345]: Tool UID becomes 0. [1970-Oct-05 20:39:34.236720]: Checking tool eeprom version [1970-Oct-05 20:39:34.238387]: Commanding tool usage stat retrieve [1970-Oct-05 20:39:34.241007]: New tool uid 0x9831 attached, updating info cache [1970-Oct-05 20:39:35.745185]: Toolhead 0 state error: 80 [1970-Oct-05 20:39:35.746916]: Connected tool has eepromv4 [1970-Oct-05 20:39:37.254541]: Raw usage stats: retract 1642090444ct, extrusion 139444795 steps, 648550 seconds, refurbed 0 times [1970-Oct-21 00:33:16.551898]: Toolhead 0 state error: 0 [1970-Oct-21 00:33:26.720457]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:33:26.722230]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:33:28.128327]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:36:21.689414]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:26.896252]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:32.205624]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:36.993801]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:42.152199]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:47.865400]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:52.619311]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:36:58.196943]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:37:03.241431]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:37:09.667222]: Raw HES proceeding [1970-Oct-21 00:37:09.721710]: Got raw val 20191, saturated: false [1970-Oct-21 00:37:09.737068]: Returning HES [1970-Oct-21 00:37:09.738741]: Sending back val 20191, saturated false [1970-Oct-21 00:37:09.835515]: Toolhead Abort [1970-Oct-21 00:37:09.837388]: aborting pru with shutdown=true [1970-Oct-21 00:37:09.850943]: Last sync period had (0,132,123558867) buffer fulls due to suspend moves [1970-Oct-21 00:37:09.852721]: Libstepper All Axis Abort [1970-Oct-21 00:37:52.429470]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:37:52.441593]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:38:50.582541]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 00:38:50.585263]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:38:51.739926]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 00:38:51.743055]: Load Sense Limit Method: 1 [1970-Oct-21 00:38:51.746959]: Last sync period had (0,132,123559638) buffer fulls due to suspend moves [1970-Oct-21 00:38:51.748742]: Libstepper All Axis Abort [1970-Oct-21 00:38:52.677110]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:38:57.860736]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:38:58.320979]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 00:38:58.322779]: Toolhead Abort [1970-Oct-21 00:38:58.324657]: aborting pru with shutdown=true [1970-Oct-21 00:38:58.329108]: Last sync period had (0,132,123560031) buffer fulls due to suspend moves [1970-Oct-21 00:38:58.331268]: Libstepper All Axis Abort [1970-Oct-21 00:38:58.379262]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 00:39:00.514821]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 00:39:00.516872]: Load Sense Limit Method: 0 [1970-Oct-21 00:39:00.557171]: Last sync period had (0,132,123560130) buffer fulls due to suspend moves [1970-Oct-21 00:39:00.558961]: Libstepper All Axis Abort [1970-Oct-21 00:39:04.241485]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:09.541934]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:14.668297]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 00:39:14.700237]: Toolhead Abort [1970-Oct-21 00:39:14.702002]: aborting pru with shutdown=true [1970-Oct-21 00:39:14.720828]: Last sync period had (0,132,123560946) buffer fulls due to suspend moves [1970-Oct-21 00:39:14.722599]: Libstepper All Axis Abort [1970-Oct-21 00:39:14.867241]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 00:39:16.980956]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:17.924032]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Oct-21 00:39:21.526518]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:25.963496]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:31.086935]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:35.522749]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:39.595942]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:39:39.597754]: Toolhead Abort [1970-Oct-21 00:39:39.599459]: aborting pru with shutdown=false [1970-Oct-21 00:39:39.602485]: Last sync period had (0,132,123562596) buffer fulls due to suspend moves [1970-Oct-21 00:39:39.604358]: Libstepper All Axis Abort [1970-Oct-21 00:39:39.658972]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:39:40.375616]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Oct-21 00:39:40.663873]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:40.932403]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:41.196610]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:41.477170]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:41.753081]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:42.019808]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:42.287916]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:42.559323]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:42.826846]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:43.103100]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:43.358940]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Oct-21 00:39:43.373858]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:43.642243]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:43.913702]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:44.183016]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:39:44.267794]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:39:44.269616]: Toolhead Abort [1970-Oct-21 00:39:44.271538]: aborting pru with shutdown=false [1970-Oct-21 00:39:44.274087]: Last sync period had (0,132,123562659) buffer fulls due to suspend moves [1970-Oct-21 00:39:44.275963]: Libstepper All Axis Abort [1970-Oct-21 00:39:44.332085]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:39:44.575661]: GAP: Query->Await [1970-Oct-21 00:39:44.595535]: TH0: Retreived step position 11665679 [1970-Oct-21 00:39:44.614471]: wait for PRU status in get position [1970-Oct-21 00:39:44.616126]: wait for PRU status in get position [1970-Oct-21 00:39:44.617713]: GAP: Await->Done(Query) [1970-Oct-21 00:39:44.847046]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 00:39:44.848808]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:39:45.725048]: Expecting 505776 steps extruded this print from 4659.38 mm of plastic [1970-Oct-21 00:39:45.859973]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:39:45.862063]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:39:45.948645]: Expected packet id: 0xe5, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Oct-21 00:39:45.951494]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:39:45.955917]: Expected packet id: 0xe5, Got packet id: 0xe4, Full packet: 0xf3,0x0,0x0,0x21,0x0,0xb2,0x0,0xf,0x30,0x9d,0x1,0x0,0xb4,0x0,0x0,0x98,0x31,0x3,0x4a,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xe4,0x0,0xd1,0xd6,0x27, [1970-Oct-21 00:39:45.957933]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Oct-21 00:39:45.966640]: Toolhead 0: Unsupported Command [1970-Oct-21 00:39:46.028310]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:40:57.106269]: Expend Buffer: false [1970-Oct-21 00:40:57.213847]: Syncing turned true [1970-Oct-21 00:40:57.295548]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:40:57.297505]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:40:58.133352]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:40:58.348799]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:40:58.350844]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:40:58.352859]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:40:58.354599]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:40:58.356400]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:40:58.358087]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:40:58.594605]: Expected packet id: 0xaa, Got packet id: 0x1, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x3b,0x36,0x1,0x0,0xd7,0x0,0x0, [1970-Oct-21 00:40:58.596505]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:40:58.734580]: Expected packet id: 0xca, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x3b,0x36,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x59,0x4b, [1970-Oct-21 00:40:58.736515]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:40:58.985152]: Expected packet id: 0xe9, Got packet id: 0xe8, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x3b,0x36,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x48,0xaf,0x0,0xe8,0x76,0xc4,0x1e,0xd2, [1970-Oct-21 00:40:58.987067]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:41:02.859144]: Toolhead 0 state error: 81 [1970-Oct-21 00:41:04.492756]: toolhead pausing [1970-Oct-21 00:41:04.494499]: Toolhead 0 : Retry: Waited 1.55306s from state change [1970-Oct-21 00:41:04.499042]: Last sync period had (0,141,2091) buffer fulls due to suspend moves [1970-Oct-21 00:41:04.501487]: Syncing turned false [1970-Oct-21 00:41:04.503125]: quack pause: true [1970-Oct-21 00:41:04.573263]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:41:04.613754]: axis running: 0 [1970-Oct-21 00:41:04.774614]: axis running: 0 [1970-Oct-21 00:41:04.828096]: axis running: 0 [1970-Oct-21 00:41:04.901030]: axis running: 0 [1970-Oct-21 00:41:04.956857]: axis running: 0 [1970-Oct-21 00:41:04.982731]: Toolhead 0 state error: 0 [1970-Oct-21 00:41:05.100508]: Last sync period had (0,141,2091) buffer fulls due to suspend moves [1970-Oct-21 00:41:05.102938]: Libstepper All Axis Abort [1970-Oct-21 00:41:05.104663]: Clear Toolhead Buffer [1970-Oct-21 00:41:05.142738]: clear toolhead buffer acknowledged [1970-Oct-21 00:41:05.240228]: toolhead unpausing [1970-Oct-21 00:41:05.242004]: quack pause: false [1970-Oct-21 00:41:05.401410]: Expend Buffer: true [1970-Oct-21 00:41:05.464015]: Last sync period had (0,141,2109) buffer fulls due to suspend moves [1970-Oct-21 00:41:05.465834]: Syncing turned false [1970-Oct-21 00:41:05.544760]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:41:05.592030]: GAP: Query->Await [1970-Oct-21 00:41:05.609752]: TH0: Retreived step position 14156047 [1970-Oct-21 00:41:05.647554]: wait for PRU status in get position [1970-Oct-21 00:41:05.649216]: wait for PRU status in get position [1970-Oct-21 00:41:05.661208]: GAP: Await->Done(Query) [1970-Oct-21 00:41:05.754913]: Suspend [1970-Oct-21 00:41:05.756753]: Suspend index 10 found, A-pos 13.3331 [1970-Oct-21 00:41:06.303466]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:41:10.259065]: GAP: Query->Await [1970-Oct-21 00:41:10.293702]: TH0: Retreived step position 14221583 [1970-Oct-21 00:41:10.327089]: wait for PRU status in get position [1970-Oct-21 00:41:10.328839]: wait for PRU status in get position [1970-Oct-21 00:41:10.340780]: GAP: Await->Done(Query) [1970-Oct-21 00:41:11.090546]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:41:11.092456]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:41:11.586619]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:41:15.615439]: Expend Buffer: false [1970-Oct-21 00:41:15.725575]: Syncing turned true [1970-Oct-21 00:41:15.763832]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:41:15.765546]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:41:16.162679]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:41:17]: Expected packet id: 0x29, Got packet id: 0x28, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x40,0xd6,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x58,0xfe,0x0,0x28,0x3d,0xbc,0x16,0x57, [1970-Oct-21 00:41:17.001784]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:41:17.015082]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:41:17.016822]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:41:17.018622]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:41:17.020522]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:41:17.022874]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:41:17.024568]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:41:17.135187]: Expected packet id: 0x44, Got packet id: 0x43, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x40,0xd6,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x4f,0xb3,0x0,0x43,0x52,0x50,0xdf,0x32, [1970-Oct-21 00:41:17.137065]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:41:18.164220]: Expend Buffer: false [1970-Oct-21 00:41:31.617398]: Toolhead 0 state error: 81 [1970-Oct-21 00:41:33.166952]: toolhead pausing [1970-Oct-21 00:41:33.168658]: Toolhead 0 : Retry: Waited 1.54951s from state change [1970-Oct-21 00:41:33.173363]: Last sync period had (0,129,1770) buffer fulls due to suspend moves [1970-Oct-21 00:41:33.175079]: Syncing turned false [1970-Oct-21 00:41:33.176769]: quack pause: true [1970-Oct-21 00:41:33.245280]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:41:33.364036]: axis running: 0 [1970-Oct-21 00:41:33.464580]: axis running: 0 [1970-Oct-21 00:41:33.526108]: axis running: 0 [1970-Oct-21 00:41:33.585573]: axis running: 0 [1970-Oct-21 00:41:33.632515]: axis running: 0 [1970-Oct-21 00:41:33.701961]: axis running: 0 [1970-Oct-21 00:41:33.725760]: Toolhead 0 state error: 0 [1970-Oct-21 00:41:33.920866]: Last sync period had (0,129,1770) buffer fulls due to suspend moves [1970-Oct-21 00:41:33.923514]: Libstepper All Axis Abort [1970-Oct-21 00:41:33.926050]: Clear Toolhead Buffer [1970-Oct-21 00:41:33.952762]: clear toolhead buffer acknowledged [1970-Oct-21 00:41:34.114135]: toolhead unpausing [1970-Oct-21 00:41:34.115817]: quack pause: false [1970-Oct-21 00:41:34.439825]: Expend Buffer: true [1970-Oct-21 00:41:34.715843]: Last sync period had (0,129,1788) buffer fulls due to suspend moves [1970-Oct-21 00:41:34.717659]: Syncing turned false [1970-Oct-21 00:41:34.912728]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:41:34.953556]: GAP: Query->Await [1970-Oct-21 00:41:34.992837]: TH0: Retreived step position 14090511 [1970-Oct-21 00:41:35.032891]: wait for PRU status in get position [1970-Oct-21 00:41:35.034696]: wait for PRU status in get position [1970-Oct-21 00:41:35.036355]: GAP: Await->Done(Query) [1970-Oct-21 00:41:35.211042]: Suspend [1970-Oct-21 00:41:35.213270]: Suspend index 12 found, A-pos 27.8069 [1970-Oct-21 00:41:35.485544]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:41:40.148042]: GAP: Query->Await [1970-Oct-21 00:41:40.170978]: TH0: Retreived step position 14024975 [1970-Oct-21 00:41:40.205860]: wait for PRU status in get position [1970-Oct-21 00:41:40.207538]: wait for PRU status in get position [1970-Oct-21 00:41:40.209180]: GAP: Await->Done(Query) [1970-Oct-21 00:41:41.025190]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:41:41.026972]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:41:41.545409]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:41:45.010524]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:41:45.549146]: Expend Buffer: false [1970-Oct-21 00:41:45.630406]: Syncing turned true [1970-Oct-21 00:41:45.662775]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:41:45.664466]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:41:46.122710]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:41:46.742734]: Expected packet id: 0x5f, Got packet id: 0x5e, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x46,0xf3,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0xe9,0xf7,0x0,0x5e,0xc4,0xe8,0x6d,0xdd, [1970-Oct-21 00:41:46.744645]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:41:46.916357]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:41:46.918755]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:41:46.920649]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:41:46.922344]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:41:46.924211]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:41:46.925879]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:41:47.622254]: Expected packet id: 0xd, Got packet id: 0xc, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x46,0xf3,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0xad,0x92,0x0,0xc,0x1b,0xe7,0x9b,0xa4, [1970-Oct-21 00:41:47.624170]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:41:48.071673]: Expend Buffer: false [1970-Oct-21 00:42:03.211435]: Toolhead 0 state error: 81 [1970-Oct-21 00:42:04.790490]: toolhead pausing [1970-Oct-21 00:42:04.792220]: Toolhead 0 : Retry: Waited 1.57884s from state change [1970-Oct-21 00:42:04.797698]: Last sync period had (0,129,1770) buffer fulls due to suspend moves [1970-Oct-21 00:42:04.799498]: Syncing turned false [1970-Oct-21 00:42:04.801356]: quack pause: true [1970-Oct-21 00:42:04.844372]: Toolhead 0 state error: 0 [1970-Oct-21 00:42:04.881787]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:42:04.921578]: axis running: 0 [1970-Oct-21 00:42:05.070343]: axis running: 0 [1970-Oct-21 00:42:05.129629]: axis running: 0 [1970-Oct-21 00:42:05.197188]: axis running: 0 [1970-Oct-21 00:42:05.264583]: axis running: 0 [1970-Oct-21 00:42:05.421690]: Last sync period had (0,129,1770) buffer fulls due to suspend moves [1970-Oct-21 00:42:05.424235]: Libstepper All Axis Abort [1970-Oct-21 00:42:05.425935]: Clear Toolhead Buffer [1970-Oct-21 00:42:05.462140]: clear toolhead buffer acknowledged [1970-Oct-21 00:42:05.554228]: toolhead unpausing [1970-Oct-21 00:42:05.556732]: quack pause: false [1970-Oct-21 00:42:05.726072]: Expend Buffer: true [1970-Oct-21 00:42:05.788023]: Last sync period had (0,129,1788) buffer fulls due to suspend moves [1970-Oct-21 00:42:05.789843]: Syncing turned false [1970-Oct-21 00:42:05.874554]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:42:05.924141]: GAP: Query->Await [1970-Oct-21 00:42:05.974149]: TH0: Retreived step position 14090511 [1970-Oct-21 00:42:06.057670]: wait for PRU status in get position [1970-Oct-21 00:42:06.059359]: wait for PRU status in get position [1970-Oct-21 00:42:06.090355]: GAP: Await->Done(Query) [1970-Oct-21 00:42:06.536358]: Suspend [1970-Oct-21 00:42:06.538260]: Suspend index 14 found, A-pos 41.5187 [1970-Oct-21 00:42:11.117062]: GAP: Query->Await [1970-Oct-21 00:42:11.139539]: TH0: Retreived step position 14156047 [1970-Oct-21 00:42:11.167981]: wait for PRU status in get position [1970-Oct-21 00:42:11.169774]: wait for PRU status in get position [1970-Oct-21 00:42:11.171635]: GAP: Await->Done(Query) [1970-Oct-21 00:42:11.920511]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:42:11.923206]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:42:12.421019]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:42:15.075529]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:42:16.526828]: Expend Buffer: false [1970-Oct-21 00:42:16.588034]: Syncing turned true [1970-Oct-21 00:42:16.626706]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:42:16.629266]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:42:17.052082]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:42:18.371058]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:42:18.372828]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:42:18.374489]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:42:18.376151]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:42:18.377939]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:42:18.379589]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:42:18.572728]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x4c,0xbd,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x55,0xeb,0x0,0x18,0xc,0x39,0x70,0xaf, [1970-Oct-21 00:42:18.574624]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:42:18.580491]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x4c,0xbd,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x55,0xeb,0x0,0x18,0xc,0x39,0x70,0xaf, [1970-Oct-21 00:42:18.582425]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Oct-21 00:42:18.915424]: Expected packet id: 0x49, Got packet id: 0x48, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x4c,0xbd,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x3e,0x43,0x0,0x48,0x5c,0x1e,0x5d,0x81, [1970-Oct-21 00:42:18.917641]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:42:18.922738]: Expected packet id: 0x49, Got packet id: 0x48, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x4c,0xbd,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x3e,0x43,0x0,0x48,0x5c,0x1e,0x5d,0x81, [1970-Oct-21 00:42:18.924644]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Oct-21 00:42:19.569463]: Expend Buffer: false [1970-Oct-21 00:42:32.933421]: Toolhead 0 state error: 81 [1970-Oct-21 00:42:34.557243]: toolhead pausing [1970-Oct-21 00:42:34.559702]: Toolhead 0 : Retry: Waited 1.62451s from state change [1970-Oct-21 00:42:34.564499]: Last sync period had (0,129,1818) buffer fulls due to suspend moves [1970-Oct-21 00:42:34.566669]: Syncing turned false [1970-Oct-21 00:42:34.568301]: quack pause: true [1970-Oct-21 00:42:34.584893]: Toolhead 0 state error: 0 [1970-Oct-21 00:42:34.596840]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:42:34.625565]: axis running: 0 [1970-Oct-21 00:42:34.768891]: axis running: 0 [1970-Oct-21 00:42:34.839143]: axis running: 0 [1970-Oct-21 00:42:34.911244]: axis running: 0 [1970-Oct-21 00:42:34.981388]: axis running: 0 [1970-Oct-21 00:42:35.029909]: axis running: 0 [1970-Oct-21 00:42:35.101861]: axis running: 0 [1970-Oct-21 00:42:35.161193]: axis running: 0 [1970-Oct-21 00:42:35.223461]: axis running: 0 [1970-Oct-21 00:42:35.440837]: Last sync period had (0,129,1818) buffer fulls due to suspend moves [1970-Oct-21 00:42:35.443271]: Libstepper All Axis Abort [1970-Oct-21 00:42:35.445112]: Clear Toolhead Buffer [1970-Oct-21 00:42:35.482816]: clear toolhead buffer acknowledged [1970-Oct-21 00:42:35.567465]: toolhead unpausing [1970-Oct-21 00:42:35.569153]: quack pause: false [1970-Oct-21 00:42:35.685829]: Expend Buffer: true [1970-Oct-21 00:42:35.748258]: Last sync period had (0,129,1833) buffer fulls due to suspend moves [1970-Oct-21 00:42:35.760561]: Syncing turned false [1970-Oct-21 00:42:35.844645]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:42:35.928477]: GAP: Query->Await [1970-Oct-21 00:42:35.965431]: TH0: Retreived step position 14156047 [1970-Oct-21 00:42:36.004920]: wait for PRU status in get position [1970-Oct-21 00:42:36.006729]: wait for PRU status in get position [1970-Oct-21 00:42:36.008360]: GAP: Await->Done(Query) [1970-Oct-21 00:42:36.117371]: Suspend [1970-Oct-21 00:42:36.119124]: Suspend index 16 found, A-pos 55.9926 [1970-Oct-21 00:42:39.220964]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:42:40.098518]: GAP: Query->Await [1970-Oct-21 00:42:40.115674]: TH0: Retreived step position 14090511 [1970-Oct-21 00:42:40.145877]: wait for PRU status in get position [1970-Oct-21 00:42:40.147659]: wait for PRU status in get position [1970-Oct-21 00:42:40.152296]: GAP: Await->Done(Query) [1970-Oct-21 00:43:58.471476]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:43:58.473268]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:43:58.961194]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:43:59.987587]: Expend Buffer: false [1970-Oct-21 00:44:00.614088]: Syncing turned true [1970-Oct-21 00:44:00.687686]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:44:00.689479]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:44:01.220706]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:44:01.961157]: Expected packet id: 0x89, Got packet id: 0x88, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x52,0xda,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x1,0xe2,0xcb,0x0,0x88,0x40,0x81,0xb2,0x19, [1970-Oct-21 00:44:01.963062]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:44:02.040709]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:44:02.042538]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:44:02.044241]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:44:02.046557]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:44:02.048266]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:44:02.049943]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:44:03.119802]: Expend Buffer: false [1970-Oct-21 00:44:17.167294]: Toolhead 0 state error: 81 [1970-Oct-21 00:44:18.726591]: toolhead pausing [1970-Oct-21 00:44:18.728428]: Toolhead 0 : Retry: Waited 1.55576s from state change [1970-Oct-21 00:44:18.733183]: Last sync period had (0,126,1755) buffer fulls due to suspend moves [1970-Oct-21 00:44:18.735060]: Syncing turned false [1970-Oct-21 00:44:18.736758]: quack pause: true [1970-Oct-21 00:44:18.825471]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:44:18.866020]: axis running: 0 [1970-Oct-21 00:44:19.002804]: axis running: 0 [1970-Oct-21 00:44:19.058602]: axis running: 0 [1970-Oct-21 00:44:19.131535]: axis running: 0 [1970-Oct-21 00:44:19.192951]: axis running: 0 [1970-Oct-21 00:44:19.248999]: axis running: 0 [1970-Oct-21 00:44:19.315746]: axis running: 0 [1970-Oct-21 00:44:19.382572]: axis running: 0 [1970-Oct-21 00:44:19.446702]: axis running: 0 [1970-Oct-21 00:44:19.572850]: axis running: 0 [1970-Oct-21 00:44:19.622062]: axis running: 0 [1970-Oct-21 00:44:19.685867]: axis running: 0 [1970-Oct-21 00:44:19.753544]: axis running: 0 [1970-Oct-21 00:44:19.820917]: axis running: 0 [1970-Oct-21 00:44:19.873222]: axis running: 0 [1970-Oct-21 00:44:19.953235]: axis running: 0 [1970-Oct-21 00:44:20.019723]: axis running: 0 [1970-Oct-21 00:44:20.135372]: axis running: 0 [1970-Oct-21 00:44:20.188982]: axis running: 0 [1970-Oct-21 00:44:20.259556]: axis running: 0 [1970-Oct-21 00:44:20.331341]: axis running: 0 [1970-Oct-21 00:44:20.440604]: axis running: 0 [1970-Oct-21 00:44:20.521335]: axis running: 0 [1970-Oct-21 00:44:20.590975]: axis running: 0 [1970-Oct-21 00:44:20.713744]: axis running: 0 [1970-Oct-21 00:44:20.773940]: axis running: 0 [1970-Oct-21 00:44:20.841721]: axis running: 0 [1970-Oct-21 00:44:20.893160]: axis running: 0 [1970-Oct-21 00:44:20.961414]: axis running: 0 [1970-Oct-21 00:44:21.028715]: axis running: 0 [1970-Oct-21 00:44:21.095570]: axis running: 0 [1970-Oct-21 00:44:21.154267]: axis running: 0 [1970-Oct-21 00:44:21.286631]: axis running: 0 [1970-Oct-21 00:44:21.344073]: axis running: 0 [1970-Oct-21 00:44:21.411216]: axis running: 0 [1970-Oct-21 00:44:21.471002]: axis running: 0 [1970-Oct-21 00:44:21.548788]: axis running: 0 [1970-Oct-21 00:44:21.622342]: axis running: 0 [1970-Oct-21 00:44:21.680592]: axis running: 0 [1970-Oct-21 00:44:21.757139]: axis running: 0 [1970-Oct-21 00:44:21.890393]: axis running: 0 [1970-Oct-21 00:44:21.949482]: axis running: 0 [1970-Oct-21 00:44:22.070255]: axis running: 0 [1970-Oct-21 00:44:22.141319]: axis running: 0 [1970-Oct-21 00:44:22.242719]: Toolhead 0 state error: 0 [1970-Oct-21 00:44:22.310802]: Last sync period had (0,126,1755) buffer fulls due to suspend moves [1970-Oct-21 00:44:22.313274]: Libstepper All Axis Abort [1970-Oct-21 00:44:22.314987]: Clear Toolhead Buffer [1970-Oct-21 00:44:22.342749]: clear toolhead buffer acknowledged [1970-Oct-21 00:44:22.469941]: toolhead unpausing [1970-Oct-21 00:44:22.481955]: quack pause: false [1970-Oct-21 00:44:22.597374]: Expend Buffer: true [1970-Oct-21 00:44:22.656084]: Last sync period had (0,126,1773) buffer fulls due to suspend moves [1970-Oct-21 00:44:22.658030]: Syncing turned false [1970-Oct-21 00:44:22.752806]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:44:22.793598]: GAP: Query->Await [1970-Oct-21 00:44:22.814422]: TH0: Retreived step position 14090511 [1970-Oct-21 00:44:22.851128]: wait for PRU status in get position [1970-Oct-21 00:44:22.852813]: wait for PRU status in get position [1970-Oct-21 00:44:22.854468]: GAP: Await->Done(Query) [1970-Oct-21 00:44:22.958260]: Suspend [1970-Oct-21 00:44:22.970876]: Suspend index 21 found, A-pos 84.9358 [1970-Oct-21 00:44:27.912306]: GAP: Query->Await [1970-Oct-21 00:44:27.937979]: TH0: Retreived step position 14024975 [1970-Oct-21 00:44:28.019736]: wait for PRU status in get position [1970-Oct-21 00:44:28.021603]: wait for PRU status in get position [1970-Oct-21 00:44:28.028272]: GAP: Await->Done(Query) [1970-Oct-21 00:44:28.788998]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:44:28.791139]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:44:29.294741]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:44:31.261151]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:44:33.335712]: Expend Buffer: false [1970-Oct-21 00:44:33.393720]: Syncing turned true [1970-Oct-21 00:44:33.406190]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:44:33.420309]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:44:33.883499]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:44:34.723353]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:44:34.725048]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:44:34.726711]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:44:34.728536]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:44:34.730571]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:44:34.732255]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:44:35.694452]: Expend Buffer: false [1970-Oct-21 00:44:50.883561]: Toolhead 0 state error: 81 [1970-Oct-21 00:44:52.434561]: toolhead pausing [1970-Oct-21 00:44:52.436304]: Toolhead 0 : Retry: Waited 1.55097s from state change [1970-Oct-21 00:44:52.441285]: Last sync period had (0,96,1224) buffer fulls due to suspend moves [1970-Oct-21 00:44:52.443157]: Syncing turned false [1970-Oct-21 00:44:52.444784]: quack pause: true [1970-Oct-21 00:44:52.491828]: Toolhead 0 state error: 0 [1970-Oct-21 00:44:52.496882]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:44:52.537007]: axis running: 0 [1970-Oct-21 00:44:52.697285]: axis running: 0 [1970-Oct-21 00:44:52.758364]: axis running: 0 [1970-Oct-21 00:44:52.821644]: axis running: 0 [1970-Oct-21 00:44:52.885643]: axis running: 0 [1970-Oct-21 00:44:52.931553]: axis running: 0 [1970-Oct-21 00:44:52.988222]: axis running: 0 [1970-Oct-21 00:44:53.040732]: axis running: 0 [1970-Oct-21 00:44:53.089497]: axis running: 0 [1970-Oct-21 00:44:53.150878]: axis running: 0 [1970-Oct-21 00:44:53.265637]: axis running: 0 [1970-Oct-21 00:44:53.310737]: axis running: 0 [1970-Oct-21 00:44:53.452861]: Last sync period had (0,96,1224) buffer fulls due to suspend moves [1970-Oct-21 00:44:53.455373]: Libstepper All Axis Abort [1970-Oct-21 00:44:53.457094]: Clear Toolhead Buffer [1970-Oct-21 00:44:53.502698]: clear toolhead buffer acknowledged [1970-Oct-21 00:44:53.580473]: toolhead unpausing [1970-Oct-21 00:44:53.582158]: quack pause: false [1970-Oct-21 00:44:53.689720]: Expend Buffer: true [1970-Oct-21 00:44:53.754028]: Last sync period had (0,96,1239) buffer fulls due to suspend moves [1970-Oct-21 00:44:53.755840]: Syncing turned false [1970-Oct-21 00:44:53.885492]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:44:53.924315]: GAP: Query->Await [1970-Oct-21 00:44:53.966683]: TH0: Retreived step position 14156047 [1970-Oct-21 00:44:54.004447]: wait for PRU status in get position [1970-Oct-21 00:44:54.006121]: wait for PRU status in get position [1970-Oct-21 00:44:54.007831]: GAP: Await->Done(Query) [1970-Oct-21 00:44:54.175380]: Suspend [1970-Oct-21 00:44:54.177257]: Suspend index 23 found, A-pos 99.1526 [1970-Oct-21 00:44:58.325129]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:44:58.716739]: GAP: Query->Await [1970-Oct-21 00:44:58.740960]: TH0: Retreived step position 14156047 [1970-Oct-21 00:44:58.783237]: wait for PRU status in get position [1970-Oct-21 00:44:58.785072]: wait for PRU status in get position [1970-Oct-21 00:44:58.786712]: GAP: Await->Done(Query) [1970-Oct-21 00:44:59.606557]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:44:59.608325]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:45:00.099679]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:45:04.109223]: Expend Buffer: false [1970-Oct-21 00:45:04.159046]: Syncing turned true [1970-Oct-21 00:45:04.192910]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:45:04.194612]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:45:04.649966]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:45:05.481893]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:45:05.483745]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:45:05.485417]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:45:05.491832]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:45:05.493513]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:45:05.495185]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:45:06.359343]: Expend Buffer: false [1970-Oct-21 00:45:17.278533]: Toolhead 0 state error: 81 [1970-Oct-21 00:45:18.828270]: toolhead pausing [1970-Oct-21 00:45:18.830395]: Toolhead 0 : Retry: Waited 1.54932s from state change [1970-Oct-21 00:45:18.835043]: Last sync period had (0,96,1221) buffer fulls due to suspend moves [1970-Oct-21 00:45:18.836923]: Syncing turned false [1970-Oct-21 00:45:18.838550]: quack pause: true [1970-Oct-21 00:45:18.928659]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:45:18.968908]: axis running: 0 [1970-Oct-21 00:45:19.121990]: axis running: 0 [1970-Oct-21 00:45:19.184634]: axis running: 0 [1970-Oct-21 00:45:19.243416]: axis running: 0 [1970-Oct-21 00:45:19.304493]: axis running: 0 [1970-Oct-21 00:45:19.363989]: axis running: 0 [1970-Oct-21 00:45:19.434866]: axis running: 0 [1970-Oct-21 00:45:19.493019]: axis running: 0 [1970-Oct-21 00:45:19.555725]: axis running: 0 [1970-Oct-21 00:45:19.621993]: axis running: 0 [1970-Oct-21 00:45:19.752899]: axis running: 0 [1970-Oct-21 00:45:19.812477]: axis running: 0 [1970-Oct-21 00:45:19.870308]: axis running: 0 [1970-Oct-21 00:45:19.944543]: axis running: 0 [1970-Oct-21 00:45:20.007640]: axis running: 0 [1970-Oct-21 00:45:20.084014]: axis running: 0 [1970-Oct-21 00:45:20.131847]: axis running: 0 [1970-Oct-21 00:45:20.198763]: axis running: 0 [1970-Oct-21 00:45:20.323161]: axis running: 0 [1970-Oct-21 00:45:20.378716]: axis running: 0 [1970-Oct-21 00:45:20.500318]: axis running: 0 [1970-Oct-21 00:45:20.559301]: axis running: 0 [1970-Oct-21 00:45:20.631678]: axis running: 0 [1970-Oct-21 00:45:20.711595]: axis running: 0 [1970-Oct-21 00:45:20.766232]: axis running: 0 [1970-Oct-21 00:45:20.843091]: axis running: 0 [1970-Oct-21 00:45:20.970670]: axis running: 0 [1970-Oct-21 00:45:20.989676]: Toolhead 0 state error: 0 [1970-Oct-21 00:45:21.032315]: axis running: 0 [1970-Oct-21 00:45:21.093993]: axis running: 0 [1970-Oct-21 00:45:21.145206]: axis running: 0 [1970-Oct-21 00:45:21.209908]: axis running: 0 [1970-Oct-21 00:45:21.272690]: axis running: 0 [1970-Oct-21 00:45:21.328900]: axis running: 0 [1970-Oct-21 00:45:21.387465]: axis running: 0 [1970-Oct-21 00:45:21.472869]: axis running: 0 [1970-Oct-21 00:45:21.569441]: axis running: 0 [1970-Oct-21 00:45:21.632515]: axis running: 0 [1970-Oct-21 00:45:21.704027]: axis running: 0 [1970-Oct-21 00:45:21.771055]: axis running: 0 [1970-Oct-21 00:45:21.837972]: axis running: 0 [1970-Oct-21 00:45:21.905977]: axis running: 0 [1970-Oct-21 00:45:21.986983]: axis running: 0 [1970-Oct-21 00:45:22.109933]: axis running: 0 [1970-Oct-21 00:45:22.226686]: axis running: 0 [1970-Oct-21 00:45:22.284442]: axis running: 0 [1970-Oct-21 00:45:22.338599]: axis running: 0 [1970-Oct-21 00:45:22.396918]: axis running: 0 [1970-Oct-21 00:45:22.462493]: axis running: 0 [1970-Oct-21 00:45:22.524080]: axis running: 0 [1970-Oct-21 00:45:22.566309]: axis running: 0 [1970-Oct-21 00:45:22.750824]: Last sync period had (0,96,1221) buffer fulls due to suspend moves [1970-Oct-21 00:45:22.754078]: Libstepper All Axis Abort [1970-Oct-21 00:45:22.755801]: Clear Toolhead Buffer [1970-Oct-21 00:45:22.786403]: clear toolhead buffer acknowledged [1970-Oct-21 00:45:22.922527]: toolhead unpausing [1970-Oct-21 00:45:22.924230]: quack pause: false [1970-Oct-21 00:45:23.053352]: Expend Buffer: true [1970-Oct-21 00:45:23.098262]: Last sync period had (0,96,1239) buffer fulls due to suspend moves [1970-Oct-21 00:45:23.110602]: Syncing turned false [1970-Oct-21 00:45:23.232922]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:45:23.297807]: GAP: Query->Await [1970-Oct-21 00:45:23.401229]: TH0: Retreived step position 14024975 [1970-Oct-21 00:45:23.477219]: wait for PRU status in get position [1970-Oct-21 00:45:23.478950]: wait for PRU status in get position [1970-Oct-21 00:45:23.512264]: GAP: Await->Done(Query) [1970-Oct-21 00:45:24.005783]: Suspend [1970-Oct-21 00:45:24.007691]: Suspend index 25 found, A-pos 114.131 [1970-Oct-21 00:45:27.426074]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:45:28.033312]: GAP: Query->Await [1970-Oct-21 00:45:28.050685]: TH0: Retreived step position 14024975 [1970-Oct-21 00:45:28.091960]: wait for PRU status in get position [1970-Oct-21 00:45:28.093630]: wait for PRU status in get position [1970-Oct-21 00:45:28.096069]: GAP: Await->Done(Query) [1970-Oct-21 00:45:28.945035]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:45:28.946813]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:45:29.840364]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:45:34.824129]: toolhead pausing [1970-Oct-21 00:45:34.832781]: Last sync period had (0,96,1674) buffer fulls due to suspend moves [1970-Oct-21 00:45:34.834564]: Syncing turned false [1970-Oct-21 00:45:34.836366]: quack pause: true [1970-Oct-21 00:45:35.041821]: Last sync period had (0,96,1683) buffer fulls due to suspend moves [1970-Oct-21 00:45:35.043617]: Libstepper All Axis Abort [1970-Oct-21 00:45:35.045443]: Clear Toolhead Buffer [1970-Oct-21 00:45:35.157879]: clear toolhead buffer acknowledged [1970-Oct-21 00:45:35.358912]: toolhead unpausing [1970-Oct-21 00:45:35.406120]: quack pause: false [1970-Oct-21 00:45:35.776432]: Expend Buffer: true [1970-Oct-21 00:45:35.821541]: Last sync period had (0,96,1701) buffer fulls due to suspend moves [1970-Oct-21 00:45:35.823373]: Syncing turned false [1970-Oct-21 00:45:35.899121]: GAP: Query->Await [1970-Oct-21 00:45:35.911831]: TH0: Retreived step position 13959439 [1970-Oct-21 00:45:35.929820]: wait for PRU status in get position [1970-Oct-21 00:45:35.935759]: wait for PRU status in get position [1970-Oct-21 00:45:35.937435]: GAP: Await->Done(Query) [1970-Oct-21 00:45:36.042730]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:45:36.044626]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:45:37.784508]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:45:41.386541]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:45:44.959117]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:45:45.226360]: Last sync period had (0,96,2538) buffer fulls due to suspend moves [1970-Oct-21 00:45:45.228289]: Syncing turned false [1970-Oct-21 00:45:45.230235]: TH0: 155 failures in last 4151 packets (3.73404%) [1970-Oct-21 00:45:45.232270]: Toolhead Abort [1970-Oct-21 00:45:45.233947]: aborting pru with shutdown=true [1970-Oct-21 00:45:45.237667]: Last sync period had (0,96,2538) buffer fulls due to suspend moves [1970-Oct-21 00:45:45.240373]: Libstepper All Axis Abort [1970-Oct-21 00:45:45.242021]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:45:45.243707]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:45:45.334314]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:45:45.336898]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:45:45.393464]: Commanding stats update: Retract count: 1642090458 [1970-Oct-21 00:45:45.395308]: Toolhead 0 marked as possibly blocking! [1970-Oct-21 00:45:46.002369]: Toolhead 0 done blocking! [1970-Oct-21 00:45:46.333532]: GetToolUsageStats called in machine state 0 [1970-Oct-21 00:45:46.339581]: Commanding tool usage stat retrieve [1970-Oct-21 00:45:46.357688]: GetToolUsageState: Proceeds to 1 [1970-Oct-21 00:45:46.377249]: GetToolUsagState: Error from retrieve: 0x10a [1970-Oct-21 00:45:46.471766]: Raw usage stats: retract 3284180902ct, extrusion 139509993 steps, 648665 seconds, refurbed 0 times [1970-Oct-21 00:45:46.716630]: GetToolUsageStats called in machine state 1 [1970-Oct-21 00:45:46.718486]: VerifyToolUsageStatsRetrieved: Done [1970-Oct-21 00:45:46.729840]: GetToolUsageState: Proceeds to 2 [1970-Oct-21 00:45:46.826634]: GetToolUsageStats called in machine state 2 [1970-Oct-21 00:45:46.828499]: GetToolUsageState: Done, resets [1970-Oct-21 00:46:08.509651]: GetCachedToolUsageStats called [1970-Oct-21 00:46:08.685311]: GetCachedToolUsageStats called [1970-Oct-21 00:46:09.978567]: GetCachedToolUsageStats called [1970-Oct-21 00:46:11.296652]: GetCachedToolUsageStats called [1970-Oct-21 00:46:29.053110]: Last sync period had (0,96,2862) buffer fulls due to suspend moves [1970-Oct-21 00:46:29.055027]: Syncing turned false [1970-Oct-21 00:46:29.056748]: Toolhead Abort [1970-Oct-21 00:46:29.058467]: aborting pru with shutdown=true [1970-Oct-21 00:46:29.067154]: Last sync period had (0,96,2862) buffer fulls due to suspend moves [1970-Oct-21 00:46:29.069049]: Libstepper All Axis Abort [1970-Oct-21 00:46:29.080946]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:46:29.082659]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:46:36.637261]: Last sync period had (0,96,3273) buffer fulls due to suspend moves [1970-Oct-21 00:46:36.639157]: Syncing turned false [1970-Oct-21 00:46:36.641111]: Toolhead Abort [1970-Oct-21 00:46:36.642821]: aborting pru with shutdown=true [1970-Oct-21 00:46:36.645453]: Last sync period had (0,96,3273) buffer fulls due to suspend moves [1970-Oct-21 00:46:36.647175]: Libstepper All Axis Abort [1970-Oct-21 00:46:36.648755]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:46:36.650725]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:46:39.648555]: Last sync period had (0,96,3441) buffer fulls due to suspend moves [1970-Oct-21 00:46:39.661745]: Syncing turned false [1970-Oct-21 00:46:39.663515]: Toolhead Abort [1970-Oct-21 00:46:39.665221]: aborting pru with shutdown=true [1970-Oct-21 00:46:39.668009]: Last sync period had (0,96,3441) buffer fulls due to suspend moves [1970-Oct-21 00:46:39.669766]: Libstepper All Axis Abort [1970-Oct-21 00:46:39.672402]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:46:39.674071]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:46:42.681690]: Last sync period had (0,96,3609) buffer fulls due to suspend moves [1970-Oct-21 00:46:42.684407]: Syncing turned false [1970-Oct-21 00:46:42.686220]: Toolhead Abort [1970-Oct-21 00:46:42.687922]: aborting pru with shutdown=true [1970-Oct-21 00:46:42.698829]: Last sync period had (0,96,3609) buffer fulls due to suspend moves [1970-Oct-21 00:46:42.701226]: Libstepper All Axis Abort [1970-Oct-21 00:46:42.702824]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:46:42.704508]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:46:42.978383]: Expected packet id: 0x24, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Oct-21 00:46:42.980514]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 00:46:42.985993]: Expected packet id: 0x24, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Oct-21 00:46:42.988028]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Oct-21 00:46:42.992576]: Expected packet id: 0x24, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Oct-21 00:46:42.994464]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 3 [1970-Oct-21 00:46:42.999987]: Expected packet id: 0x24, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Oct-21 00:46:43.002369]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 4 [1970-Oct-21 00:46:43.007379]: Expected packet id: 0x24, Got packet id: 0x23, Full packet: 0xf3,0x0,0x0,0x33,0x0,0xac,0x0,0xf,0x6b,0x64,0x1,0x0,0x0,0x0,0x0,0x98,0x31,0x3,0x4a,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x23,0x83,0xa5,0xa7,0x77, [1970-Oct-21 00:46:43.009275]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 5 [1970-Oct-21 00:46:43.023134]: 0x1df2b8 [1970-Oct-21 00:50:09.009154]: GetCachedToolUsageStats called [1970-Oct-21 00:50:09.180515]: GetCachedToolUsageStats called [1970-Oct-21 00:50:10.390604]: GetCachedToolUsageStats called [1970-Oct-21 00:50:15.840603]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:50:15.842348]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:50:36.309834]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 00:50:36.311909]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:50:36.427139]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:53:09.273814]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:53:18.743499]: Toolhead 0 state error: 80 [1970-Oct-21 00:53:20.407317]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 00:53:20.414070]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 00:53:20.473913]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 00:54:30.034787]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 00:54:30.051869]: Load Sense Limit Method: 1 [1970-Oct-21 00:54:30.054569]: Last sync period had (0,96,22632) buffer fulls due to suspend moves [1970-Oct-21 00:54:30.056329]: Libstepper All Axis Abort [1970-Oct-21 00:54:31.218152]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:54:35.374250]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:54:36.635208]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 00:54:36.637791]: TH0: 6 failures in last 659 packets (0.91047%) [1970-Oct-21 00:54:36.639705]: Toolhead Abort [1970-Oct-21 00:54:36.646320]: aborting pru with shutdown=true [1970-Oct-21 00:54:36.648824]: Last sync period had (0,96,23112) buffer fulls due to suspend moves [1970-Oct-21 00:54:36.651098]: Libstepper All Axis Abort [1970-Oct-21 00:54:36.679375]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 00:54:36.724142]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 00:54:36.769830]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 00:54:38.655848]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 00:54:38.657803]: Load Sense Limit Method: 0 [1970-Oct-21 00:54:38.660438]: Last sync period had (0,96,23199) buffer fulls due to suspend moves [1970-Oct-21 00:54:38.662205]: Libstepper All Axis Abort [1970-Oct-21 00:54:41.309855]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:54:45.585413]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:54:50.614023]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:54:52.756517]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 00:54:52.758312]: Toolhead Abort [1970-Oct-21 00:54:52.769095]: aborting pru with shutdown=true [1970-Oct-21 00:54:52.772052]: Last sync period had (0,96,24192) buffer fulls due to suspend moves [1970-Oct-21 00:54:52.773786]: Libstepper All Axis Abort [1970-Oct-21 00:54:52.802144]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 00:54:52.833372]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 00:54:53.365556]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.470499]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.496206]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.535207]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.567468]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.608658]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.633266]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.673577]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.716150]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.747893]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.772634]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.813552]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.860001]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.886296]: HOME: wait for buffer empty [1970-Oct-21 00:54:53.917520]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.001267]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.027348]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.067386]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.110576]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.135228]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.161617]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.202699]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.255583]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.281060]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.309384]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.352230]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.388846]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.415618]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.457428]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.511924]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.558560]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.602296]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.650181]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.674901]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.714318]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.750180]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.791831]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.864737]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.918506]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.966530]: HOME: wait for buffer empty [1970-Oct-21 00:54:54.996940]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.032933]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.108510]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.132960]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.160916]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.207103]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.248251]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.272817]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.306685]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.360596]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:54:55.362405]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.388678]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.413389]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.463792]: HOME: wait for buffer empty [1970-Oct-21 00:54:55.505614]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Oct-21 00:54:59.586475]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:04.252649]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:08.256785]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:13.071367]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:17.101027]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:17.164983]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:55:17.166786]: Toolhead Abort [1970-Oct-21 00:55:17.168595]: aborting pru with shutdown=false [1970-Oct-21 00:55:17.171272]: Last sync period had (0,96,25998) buffer fulls due to suspend moves [1970-Oct-21 00:55:17.173009]: Libstepper All Axis Abort [1970-Oct-21 00:55:17.221542]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:55:17.261602]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:55:17.290568]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 00:55:19.599624]: GAP: Query->Await [1970-Oct-21 00:55:19.637185]: GAP: Await [1970-Oct-21 00:55:19.693220]: GAP: Await [1970-Oct-21 00:55:19.709131]: TH0: Retreived step position 11469071 [1970-Oct-21 00:55:19.749096]: wait for PRU status in get position [1970-Oct-21 00:55:19.759851]: GAP: Await->Done(Query) [1970-Oct-21 00:55:19.811849]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7) [1970-Oct-21 00:55:19.866465]: Syncing turned true [1970-Oct-21 00:55:19.894491]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 00:55:20.065622]: Toolhead 0 commands idle [1970-Oct-21 00:55:20.154582]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 00:55:20.290400]: Toolhead 0 ADC Error: 1 [1970-Oct-21 00:55:20.373732]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 00:55:20.375449]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 00:55:20.377244]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 00:55:20.378925]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 00:55:20.381564]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 00:55:20.383239]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 00:55:21.825672]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:26.486143]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:27.467137]: Buffer stall ongoing: 5289 [1970-Oct-21 00:55:27.498525]: Buffer stall ongoing: 11868 [1970-Oct-21 00:55:27.549526]: Buffer stall ongoing: 22704 [1970-Oct-21 00:55:27.576544]: Buffer stall ongoing: 28380 [1970-Oct-21 00:55:27.645920]: Buffer stall ongoing: 42957 [1970-Oct-21 00:55:27.708383]: Buffer stall ongoing: 56244 [1970-Oct-21 00:55:27.744248]: Last sync period had (0,0,585) buffer fulls due to suspend moves [1970-Oct-21 00:55:27.746051]: Syncing turned false [1970-Oct-21 00:55:27.782535]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 00:55:27.784301]: Buffer stall ongoing: 64113 [1970-Oct-21 00:55:28.845837]: HES logged: false [1970-Oct-21 00:55:28.879094]: HES logged: false [1970-Oct-21 00:55:28.906379]: HES logged: false [1970-Oct-21 00:55:28.947406]: HES logged: false [1970-Oct-21 00:55:28.988369]: HES logged: false [1970-Oct-21 00:55:29.025994]: HES logged: false [1970-Oct-21 00:55:29.072401]: HES logged: false [1970-Oct-21 00:55:29.136858]: HES logged: false [1970-Oct-21 00:55:29.206667]: HES logged: false [1970-Oct-21 00:55:29.268360]: HES logged: false [1970-Oct-21 00:55:29.320978]: HES logged: false [1970-Oct-21 00:55:29.347395]: HES logged: false [1970-Oct-21 00:55:29.384702]: HES logged: false [1970-Oct-21 00:55:29.432134]: HES logged: false [1970-Oct-21 00:55:29.466599]: HES logged: false [1970-Oct-21 00:55:29.493862]: HES logged: false [1970-Oct-21 00:55:29.537489]: HES logged: false [1970-Oct-21 00:55:29.581522]: HES logged: false [1970-Oct-21 00:55:29.620710]: HES logged: false [1970-Oct-21 00:55:29.701931]: HES logged: false [1970-Oct-21 00:55:29.735885]: HES logged: false [1970-Oct-21 00:55:29.762196]: HES logged: false [1970-Oct-21 00:55:29.822656]: HES logged: false [1970-Oct-21 00:55:29.849579]: HES logged: false [1970-Oct-21 00:55:29.875649]: HES logged: false [1970-Oct-21 00:55:29.919263]: HES logged: false [1970-Oct-21 00:55:29.963288]: HES logged: false [1970-Oct-21 00:55:29.998821]: HES logged: false [1970-Oct-21 00:55:30.031648]: HES logged: false [1970-Oct-21 00:55:30.077820]: HES logged: false [1970-Oct-21 00:55:30.113940]: HES logged: false [1970-Oct-21 00:55:30.144336]: HES logged: false [1970-Oct-21 00:55:30.224781]: HES logged: false [1970-Oct-21 00:55:30.257412]: HES logged: false [1970-Oct-21 00:55:30.284884]: HES logged: false [1970-Oct-21 00:55:30.326174]: HES logged: false [1970-Oct-21 00:55:30.373468]: HES logged: false [1970-Oct-21 00:55:30.401501]: HES logged: false [1970-Oct-21 00:55:30.431165]: HES logged: false [1970-Oct-21 00:55:30.476885]: HES logged: false [1970-Oct-21 00:55:30.519850]: HES logged: false [1970-Oct-21 00:55:30.545821]: HES logged: false [1970-Oct-21 00:55:30.589117]: HES logged: false [1970-Oct-21 00:55:30.633745]: HES logged: false [1970-Oct-21 00:55:30.659298]: HES logged: false [1970-Oct-21 00:55:30.794252]: HES logged: false [1970-Oct-21 00:55:30.855724]: HES logged: false [1970-Oct-21 00:55:30.885152]: HES logged: false [1970-Oct-21 00:55:30.913687]: HES logged: false [1970-Oct-21 00:55:30.948055]: HES logged: false [1970-Oct-21 00:55:30.997782]: HES logged: false [1970-Oct-21 00:55:31.033228]: HES logged: false [1970-Oct-21 00:55:31.059341]: HES logged: false [1970-Oct-21 00:55:31.113151]: HES logged: false [1970-Oct-21 00:55:31.152964]: HES logged: false [1970-Oct-21 00:55:31.179162]: HES logged: false [1970-Oct-21 00:55:31.226190]: HES logged: false [1970-Oct-21 00:55:31.296853]: HES logged: false [1970-Oct-21 00:55:31.331064]: HES logged: false [1970-Oct-21 00:55:31.376937]: HES logged: false [1970-Oct-21 00:55:31.412331]: HES logged: false [1970-Oct-21 00:55:31.438905]: HES logged: false [1970-Oct-21 00:55:31.475863]: HES logged: true [1970-Oct-21 00:55:33.070974]: Toolhead 0 ADC Error: 0 [1970-Oct-21 00:55:34.897347]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:39.235622]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:43.014960]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:47.565916]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 00:55:48.815893]: Toolhead Abort [1970-Oct-21 00:55:48.817769]: aborting pru with shutdown=true [1970-Oct-21 00:55:48.822225]: Last sync period had (0,0,2103) buffer fulls due to suspend moves [1970-Oct-21 00:55:48.824136]: Libstepper All Axis Abort [1970-Oct-21 00:55:48.921105]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 00:55:48.932368]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:00:33.676626]: Toolhead 0 state error: 0 [1970-Oct-21 01:01:24.362918]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 01:01:24.364686]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:01:25.229594]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 01:01:25.231914]: Load Sense Limit Method: 1 [1970-Oct-21 01:01:25.234497]: Last sync period had (0,0,4248) buffer fulls due to suspend moves [1970-Oct-21 01:01:25.236235]: Libstepper All Axis Abort [1970-Oct-21 01:01:28.277325]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:01:31.841002]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 01:01:31.842832]: Toolhead Abort [1970-Oct-21 01:01:31.844593]: aborting pru with shutdown=true [1970-Oct-21 01:01:31.863043]: Last sync period had (0,0,4689) buffer fulls due to suspend moves [1970-Oct-21 01:01:31.864823]: Libstepper All Axis Abort [1970-Oct-21 01:01:32.047619]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 01:01:33.861639]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:01:34.210438]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 01:01:34.212443]: Load Sense Limit Method: 0 [1970-Oct-21 01:01:34.215123]: Last sync period had (0,0,4818) buffer fulls due to suspend moves [1970-Oct-21 01:01:34.216865]: Libstepper All Axis Abort [1970-Oct-21 01:01:38.698625]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:01:43.856050]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:01:48.296131]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 01:01:48.302189]: Toolhead Abort [1970-Oct-21 01:01:48.303923]: aborting pru with shutdown=true [1970-Oct-21 01:01:48.307102]: Last sync period had (0,0,5772) buffer fulls due to suspend moves [1970-Oct-21 01:01:48.309013]: Libstepper All Axis Abort [1970-Oct-21 01:01:48.361776]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 01:01:49.091147]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:01:51.070350]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Oct-21 01:01:53.163578]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:01:57.948993]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:01.961124]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:06.704197]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:10.617576]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:12.706058]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:02:12.707887]: Toolhead Abort [1970-Oct-21 01:02:12.709583]: aborting pru with shutdown=false [1970-Oct-21 01:02:12.712796]: Last sync period had (0,0,7581) buffer fulls due to suspend moves [1970-Oct-21 01:02:12.714571]: Libstepper All Axis Abort [1970-Oct-21 01:02:12.759932]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:02:13.183425]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Oct-21 01:02:13.517293]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:13.761965]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:14.001363]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:14.237585]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:14.455793]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:14.693657]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:14.932540]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:15.173684]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:15.407954]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:15.635811]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:15.798459]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Oct-21 01:02:15.882271]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:16.123817]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:16.369282]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:16.608332]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:16.849173]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:17.093928]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:17.169680]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:02:17.171952]: Toolhead Abort [1970-Oct-21 01:02:17.173807]: aborting pru with shutdown=false [1970-Oct-21 01:02:17.180809]: Last sync period had (0,0,7629) buffer fulls due to suspend moves [1970-Oct-21 01:02:17.182586]: Libstepper All Axis Abort [1970-Oct-21 01:02:17.464572]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:02:18.033116]: GAP: Query->Await [1970-Oct-21 01:02:18.050979]: TH0: Retreived step position 8126735 [1970-Oct-21 01:02:18.068019]: wait for PRU status in get position [1970-Oct-21 01:02:18.069821]: wait for PRU status in get position [1970-Oct-21 01:02:18.071646]: GAP: Await->Done(Query) [1970-Oct-21 01:02:18.291985]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 01:02:18.293897]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:02:19.013234]: Expecting 505776 steps extruded this print from 4659.38 mm of plastic [1970-Oct-21 01:02:19.171948]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:02:19.173690]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:02:19.304292]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:02:38.784808]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:45.382301]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:02:48.937646]: Last sync period had (0,0,9441) buffer fulls due to suspend moves [1970-Oct-21 01:02:48.951868]: Syncing turned false [1970-Oct-21 01:02:48.953725]: Toolhead Abort [1970-Oct-21 01:02:48.955441]: aborting pru with shutdown=true [1970-Oct-21 01:02:48.970838]: Last sync period had (0,0,9441) buffer fulls due to suspend moves [1970-Oct-21 01:02:48.972627]: Libstepper All Axis Abort [1970-Oct-21 01:02:48.974250]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 01:02:48.976082]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:02:49.159500]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 01:02:49.161538]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:02:49.258524]: Commanding stats update: Retract count: 3284180902 [1970-Oct-21 01:02:49.270542]: Toolhead 0 marked as possibly blocking! [1970-Oct-21 01:02:49.424550]: Toolhead 0 done blocking! [1970-Oct-21 01:02:49.565786]: GetToolUsageStats called in machine state 0 [1970-Oct-21 01:02:49.567517]: Commanding tool usage stat retrieve [1970-Oct-21 01:02:49.569297]: GetToolUsageState: Proceeds to 1 [1970-Oct-21 01:02:49.575565]: GetToolUsagState: Error from retrieve: 0x10a [1970-Oct-21 01:02:49.605408]: Raw usage stats: retract 2273394508ct, extrusion 139509993 steps, 648665 seconds, refurbed 0 times [1970-Oct-21 01:02:49.693732]: GetToolUsageStats called in machine state 1 [1970-Oct-21 01:02:49.696781]: VerifyToolUsageStatsRetrieved: Done [1970-Oct-21 01:02:49.698411]: GetToolUsageState: Proceeds to 2 [1970-Oct-21 01:02:49.799919]: GetToolUsageStats called in machine state 2 [1970-Oct-21 01:02:49.812722]: GetToolUsageState: Done, resets [1970-Oct-21 01:02:59.148103]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:02:59.149868]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:03:00.378585]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:03:04.978975]: Toolhead 0 state error: 80 [1970-Oct-21 01:03:06.846616]: Toolhead 0 state error: 0 [1970-Oct-21 01:04:17.385962]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:22.897223]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:28.933607]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:34.185531]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:39.756636]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:44.847013]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:50.477325]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:04:55.982464]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:05:01.826858]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:05:06.012243]: Raw HES proceeding [1970-Oct-21 01:05:06.061956]: Got raw val 19737, saturated: false [1970-Oct-21 01:05:06.086715]: Returning HES [1970-Oct-21 01:05:06.089255]: Sending back val 19737, saturated false [1970-Oct-21 01:05:06.185809]: Toolhead Abort [1970-Oct-21 01:05:06.187583]: aborting pru with shutdown=true [1970-Oct-21 01:05:06.200857]: Last sync period had (0,0,17019) buffer fulls due to suspend moves [1970-Oct-21 01:05:06.202636]: Libstepper All Axis Abort [1970-Oct-21 01:05:12.166496]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:05:12.169068]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:05:13.656854]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:05:18.870428]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:05:26.083337]: Raw HES proceeding [1970-Oct-21 01:05:26.141740]: Got raw val 20152, saturated: false [1970-Oct-21 01:05:26.253122]: Returning HES [1970-Oct-21 01:05:26.254854]: Sending back val 20152, saturated false [1970-Oct-21 01:05:26.353890]: Toolhead Abort [1970-Oct-21 01:05:26.355640]: aborting pru with shutdown=true [1970-Oct-21 01:05:26.371266]: Last sync period had (0,0,17586) buffer fulls due to suspend moves [1970-Oct-21 01:05:26.373035]: Libstepper All Axis Abort [1970-Oct-21 01:05:29.340330]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 01:05:29.342138]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:05:44.237411]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 01:05:44.239156]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:05:45.151506]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 01:05:45.153488]: Load Sense Limit Method: 1 [1970-Oct-21 01:05:45.157965]: Last sync period had (0,0,17844) buffer fulls due to suspend moves [1970-Oct-21 01:05:45.159729]: Libstepper All Axis Abort [1970-Oct-21 01:05:46.739801]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:05:51.726264]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 01:05:51.728072]: Toolhead Abort [1970-Oct-21 01:05:51.729907]: aborting pru with shutdown=true [1970-Oct-21 01:05:51.741438]: Last sync period had (0,0,18186) buffer fulls due to suspend moves [1970-Oct-21 01:05:51.743583]: Libstepper All Axis Abort [1970-Oct-21 01:05:51.777124]: HOME: 1 homing: Limit Detected!: [1970-Oct-21 01:05:52.913884]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:05:53.629508]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Oct-21 01:05:53.631812]: Load Sense Limit Method: 0 [1970-Oct-21 01:05:53.635123]: Last sync period had (0,0,18291) buffer fulls due to suspend moves [1970-Oct-21 01:05:53.636855]: Libstepper All Axis Abort [1970-Oct-21 01:05:59.517149]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:04.948433]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:07.738933]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 01:06:07.740948]: Toolhead Abort [1970-Oct-21 01:06:07.742782]: aborting pru with shutdown=true [1970-Oct-21 01:06:07.745357]: Last sync period had (0,0,19065) buffer fulls due to suspend moves [1970-Oct-21 01:06:07.747974]: Libstepper All Axis Abort [1970-Oct-21 01:06:07.806908]: HOME: 0 homing: Limit Detected!: [1970-Oct-21 01:06:10.513001]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Oct-21 01:06:11.815321]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:16.424627]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:21.893695]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:26.710880]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:31.371788]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:31.838460]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:06:31.860612]: Toolhead Abort [1970-Oct-21 01:06:31.862386]: aborting pru with shutdown=false [1970-Oct-21 01:06:31.879638]: Last sync period had (0,0,20586) buffer fulls due to suspend moves [1970-Oct-21 01:06:31.884721]: Libstepper All Axis Abort [1970-Oct-21 01:06:32.164200]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:06:32.855378]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Oct-21 01:06:33.332541]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:33.603579]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:33.870495]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:34.137266]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:34.412985]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:34.680546]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:34.947743]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:35.222468]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:35.491212]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:35.766890]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:35.826948]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Oct-21 01:06:36.055972]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:06:36.124821]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:06:36.126765]: Toolhead Abort [1970-Oct-21 01:06:36.128485]: aborting pru with shutdown=false [1970-Oct-21 01:06:36.132077]: Last sync period had (0,0,20634) buffer fulls due to suspend moves [1970-Oct-21 01:06:36.133833]: Libstepper All Axis Abort [1970-Oct-21 01:06:36.240775]: HOME: 2 homing: Limit Detected!: [1970-Oct-21 01:06:36.437461]: GAP: Query->Await [1970-Oct-21 01:06:36.451615]: TH0: Retreived step position 11927823 [1970-Oct-21 01:06:36.469465]: wait for PRU status in get position [1970-Oct-21 01:06:36.471481]: wait for PRU status in get position [1970-Oct-21 01:06:36.473089]: GAP: Await->Done(Query) [1970-Oct-21 01:06:36.712669]: Heater manager Set Target Temperature to 180, index 0 [1970-Oct-21 01:06:36.714561]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:06:37.597606]: Expecting 505776 steps extruded this print from 4659.38 mm of plastic [1970-Oct-21 01:06:37.772067]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:06:37.773864]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:06:37.989632]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:07:50.793824]: Expend Buffer: false [1970-Oct-21 01:07:50.896273]: Syncing turned true [1970-Oct-21 01:07:50.999194]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 01:07:51.011721]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 01:07:51.193473]: Toolhead 0 ADC Error: 1 [1970-Oct-21 01:07:52.007960]: Expected packet id: 0x1, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x18,0x63,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a, [1970-Oct-21 01:07:52.009889]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:07:52.297901]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 01:07:52.299635]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 01:07:52.301672]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 01:07:52.303362]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 01:07:52.305054]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 01:07:52.306746]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 01:07:52.604036]: Expected packet id: 0x48, Got packet id: 0x47, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x18,0x63,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x54,0x97,0x0,0x47,0x38,0xfc,0x8a,0xa1, [1970-Oct-21 01:07:52.605946]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:07:52.611323]: Expected packet id: 0x48, Got packet id: 0x47, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x18,0x63,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x54,0x97,0x0,0x47,0x38,0xfc,0x8a,0xa1, [1970-Oct-21 01:07:52.613219]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Oct-21 01:07:56.662680]: Toolhead 0 state error: 81 [1970-Oct-21 01:07:58.235733]: toolhead pausing [1970-Oct-21 01:07:58.237483]: Toolhead 0 : Retry: Waited 1.57219s from state change [1970-Oct-21 01:07:58.242201]: Last sync period had (0,135,2034) buffer fulls due to suspend moves [1970-Oct-21 01:07:58.243972]: Syncing turned false [1970-Oct-21 01:07:58.245613]: quack pause: true [1970-Oct-21 01:07:58.315309]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 01:07:58.355876]: axis running: 0 [1970-Oct-21 01:07:58.509329]: axis running: 0 [1970-Oct-21 01:07:58.581352]: axis running: 0 [1970-Oct-21 01:07:58.644279]: axis running: 0 [1970-Oct-21 01:07:58.699142]: axis running: 0 [1970-Oct-21 01:07:58.757186]: axis running: 0 [1970-Oct-21 01:07:58.792795]: Toolhead 0 state error: 0 [1970-Oct-21 01:07:58.920830]: Last sync period had (0,135,2034) buffer fulls due to suspend moves [1970-Oct-21 01:07:58.923322]: Libstepper All Axis Abort [1970-Oct-21 01:07:58.925031]: Clear Toolhead Buffer [1970-Oct-21 01:07:58.954196]: clear toolhead buffer acknowledged [1970-Oct-21 01:07:59.093854]: toolhead unpausing [1970-Oct-21 01:07:59.095854]: quack pause: false [1970-Oct-21 01:07:59.208750]: Expend Buffer: true [1970-Oct-21 01:07:59.268295]: Last sync period had (0,135,2052) buffer fulls due to suspend moves [1970-Oct-21 01:07:59.280402]: Syncing turned false [1970-Oct-21 01:07:59.360853]: Toolhead 0 ADC Error: 0 [1970-Oct-21 01:07:59.400962]: GAP: Query->Await [1970-Oct-21 01:07:59.423706]: TH0: Retreived step position 14221583 [1970-Oct-21 01:07:59.456297]: wait for PRU status in get position [1970-Oct-21 01:07:59.457977]: wait for PRU status in get position [1970-Oct-21 01:07:59.459605]: GAP: Await->Done(Query) [1970-Oct-21 01:07:59.583137]: Suspend [1970-Oct-21 01:07:59.585128]: Suspend index 10 found, A-pos 13.3331 [1970-Oct-21 01:08:00.022104]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:08:04.015910]: GAP: Query->Await [1970-Oct-21 01:08:04.046966]: TH0: Retreived step position 14287119 [1970-Oct-21 01:08:04.087359]: wait for PRU status in get position [1970-Oct-21 01:08:04.089200]: wait for PRU status in get position [1970-Oct-21 01:08:04.091079]: GAP: Await->Done(Query) [1970-Oct-21 01:08:04.901143]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:08:04.903119]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:08:05.390573]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:08:09.459149]: Expend Buffer: false [1970-Oct-21 01:08:09.534214]: Syncing turned true [1970-Oct-21 01:08:09.556855]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 01:08:09.558583]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 01:08:09.729082]: Toolhead 0 ADC Error: 1 [1970-Oct-21 01:08:10.827168]: Expected packet id: 0xe4, Got packet id: 0xe3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x1e,0x3,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x5a,0x55,0x0,0xe3,0x78,0x39,0xb5,0xf9, [1970-Oct-21 01:08:10.829068]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:08:10.859772]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 01:08:10.861861]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 01:08:10.863525]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 01:08:10.865180]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 01:08:10.867526]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 01:08:10.869191]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 01:08:11.324770]: Expected packet id: 0x33, Got packet id: 0x32, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdb,0x0,0xf,0x1e,0x3,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x38,0x19,0x0,0x32,0x61,0x42,0x1c,0x97, [1970-Oct-21 01:08:11.326673]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:08:11.571598]: Expected packet id: 0x71, Got packet id: 0x70, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xdc,0x0,0xf,0x1e,0x3,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x27,0x1e,0x0,0x70,0x82,0x1c,0xf5,0xc9, [1970-Oct-21 01:08:11.573514]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:08:12.093626]: Expend Buffer: false [1970-Oct-21 01:08:20.470374]: Toolhead 0 state error: 81 [1970-Oct-21 01:08:22.042893]: toolhead pausing [1970-Oct-21 01:08:22.044632]: Toolhead 0 : Retry: Waited 1.57247s from state change [1970-Oct-21 01:08:22.050258]: Last sync period had (0,129,1773) buffer fulls due to suspend moves [1970-Oct-21 01:08:22.052328]: Syncing turned false [1970-Oct-21 01:08:22.053974]: quack pause: true [1970-Oct-21 01:08:22.092821]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 01:08:22.132808]: axis running: 0 [1970-Oct-21 01:08:22.301647]: axis running: 0 [1970-Oct-21 01:08:22.365003]: axis running: 0 [1970-Oct-21 01:08:22.427570]: axis running: 0 [1970-Oct-21 01:08:22.485657]: axis running: 0 [1970-Oct-21 01:08:22.522423]: Toolhead 0 state error: 0 [1970-Oct-21 01:08:22.651749]: CLEAR BUFFER FAIL! in libstepper::Abort() [1970-Oct-21 01:08:22.654950]: Last sync period had (0,129,1773) buffer fulls due to suspend moves [1970-Oct-21 01:08:22.656909]: Libstepper All Axis Abort [1970-Oct-21 01:08:22.658641]: Clear Toolhead Buffer [1970-Oct-21 01:08:22.670756]: clear toolhead buffer acknowledged [1970-Oct-21 01:08:22.779681]: toolhead unpausing [1970-Oct-21 01:08:22.791821]: quack pause: false [1970-Oct-21 01:08:22.953369]: Expend Buffer: true [1970-Oct-21 01:08:23.010786]: Last sync period had (0,129,1791) buffer fulls due to suspend moves [1970-Oct-21 01:08:23.012600]: Syncing turned false [1970-Oct-21 01:08:23.107669]: Toolhead 0 ADC Error: 0 [1970-Oct-21 01:08:23.148679]: GAP: Query->Await [1970-Oct-21 01:08:23.172841]: TH0: Retreived step position 14287119 [1970-Oct-21 01:08:23.212502]: wait for PRU status in get position [1970-Oct-21 01:08:23.214183]: wait for PRU status in get position [1970-Oct-21 01:08:23.215952]: GAP: Await->Done(Query) [1970-Oct-21 01:08:23.348391]: Suspend [1970-Oct-21 01:08:23.359173]: Suspend index 11 found, A-pos 13.7118 [1970-Oct-21 01:08:23.991837]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:08:27.860747]: GAP: Query->Await [1970-Oct-21 01:08:27.883699]: TH0: Retreived step position 14156047 [1970-Oct-21 01:08:27.922623]: wait for PRU status in get position [1970-Oct-21 01:08:27.924353]: wait for PRU status in get position [1970-Oct-21 01:08:27.926123]: GAP: Await->Done(Query) [1970-Oct-21 01:08:28.688014]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:08:28.689811]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:08:29.192081]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:08:33.333065]: Expend Buffer: false [1970-Oct-21 01:08:33.396883]: Syncing turned true [1970-Oct-21 01:08:33.423104]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 01:08:33.424832]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 01:08:33.643916]: Toolhead 0 ADC Error: 1 [1970-Oct-21 01:08:34.514821]: Expected packet id: 0x5d, Got packet id: 0x5c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x1e,0x2d,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x67,0x8d,0x0,0x5c,0x8b,0x53,0x37,0xf3, [1970-Oct-21 01:08:34.516723]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:08:34.667081]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 01:08:34.668781]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 01:08:34.670826]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 01:08:34.672508]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 01:08:34.675095]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 01:08:34.676806]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 01:08:35.305894]: Expected packet id: 0xfa, Got packet id: 0xf9, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x1e,0x2d,0x1,0x0,0xd7,0x0,0x0,0x98,0x31,0x3,0x4a,0x1,0x0,0x0,0x0,0x2,0x31,0x2a,0x0,0xf9,0x69,0x5b,0x42,0x32, [1970-Oct-21 01:08:35.307816]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Oct-21 01:08:35.814797]: Expend Buffer: false [1970-Oct-21 01:08:45.458862]: Toolhead 0 state error: 81 [1970-Oct-21 01:08:47.012053]: toolhead pausing [1970-Oct-21 01:08:47.013781]: Toolhead 0 : Retry: Waited 1.5529s from state change [1970-Oct-21 01:08:47.018484]: Last sync period had (0,126,1761) buffer fulls due to suspend moves [1970-Oct-21 01:08:47.020756]: Syncing turned false [1970-Oct-21 01:08:47.022434]: quack pause: true [1970-Oct-21 01:08:47.084117]: Toolhead 0 state error: 0 [1970-Oct-21 01:08:47.141822]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 01:08:47.239850]: axis running: 0 [1970-Oct-21 01:08:47.320411]: axis running: 0 [1970-Oct-21 01:08:47.384073]: axis running: 0 [1970-Oct-21 01:08:47.437478]: axis running: 0 [1970-Oct-21 01:08:47.505586]: axis running: 0 [1970-Oct-21 01:08:47.558639]: axis running: 0 [1970-Oct-21 01:08:47.629096]: axis running: 0 [1970-Oct-21 01:08:47.762014]: axis running: 0 [1970-Oct-21 01:08:47.823792]: axis running: 0 [1970-Oct-21 01:08:47.879288]: axis running: 0 [1970-Oct-21 01:08:47.964963]: axis running: 0 [1970-Oct-21 01:08:48.008760]: axis running: 0 [1970-Oct-21 01:08:48.083351]: axis running: 0 [1970-Oct-21 01:08:48.146861]: axis running: 0 [1970-Oct-21 01:08:48.220255]: axis running: 0 [1970-Oct-21 01:08:48.337083]: axis running: 0 [1970-Oct-21 01:08:48.404896]: axis running: 0 [1970-Oct-21 01:08:48.469356]: axis running: 0 [1970-Oct-21 01:08:48.549494]: axis running: 0 [1970-Oct-21 01:08:48.698378]: axis running: 0 [1970-Oct-21 01:08:48.989426]: axis running: 0 [1970-Oct-21 01:08:49.346658]: axis running: 0 [1970-Oct-21 01:08:49.422840]: axis running: 0 [1970-Oct-21 01:08:49.490391]: axis running: 0 [1970-Oct-21 01:08:49.550536]: axis running: 0 [1970-Oct-21 01:08:49.612382]: axis running: 0 [1970-Oct-21 01:08:49.648446]: Toolhead 0 state error: 81 [1970-Oct-21 01:08:49.673214]: axis running: 0 [1970-Oct-21 01:08:49.796918]: axis running: 0 [1970-Oct-21 01:08:49.861466]: axis running: 0 [1970-Oct-21 01:08:49.918469]: axis running: 0 [1970-Oct-21 01:08:49.994892]: axis running: 0 [1970-Oct-21 01:08:50.046563]: axis running: 0 [1970-Oct-21 01:08:50.109051]: axis running: 0 [1970-Oct-21 01:08:50.173592]: axis running: 0 [1970-Oct-21 01:08:50.254400]: axis running: 0 [1970-Oct-21 01:08:50.320691]: axis running: 0 [1970-Oct-21 01:08:50.489682]: axis running: 0 [1970-Oct-21 01:08:50.566408]: axis running: 0 [1970-Oct-21 01:08:50.638951]: axis running: 0 [1970-Oct-21 01:08:50.704325]: axis running: 0 [1970-Oct-21 01:08:50.776400]: axis running: 0 [1970-Oct-21 01:08:50.844517]: axis running: 0 [1970-Oct-21 01:08:50.913659]: axis running: 0 [1970-Oct-21 01:08:51.041978]: axis running: 0 [1970-Oct-21 01:08:51.095537]: axis running: 0 [1970-Oct-21 01:08:51.195870]: Toolhead 0 state error: 0 [1970-Oct-21 01:08:51.270489]: Last sync period had (0,126,1761) buffer fulls due to suspend moves [1970-Oct-21 01:08:51.273197]: Libstepper All Axis Abort [1970-Oct-21 01:08:51.274940]: Clear Toolhead Buffer [1970-Oct-21 01:08:51.302744]: clear toolhead buffer acknowledged [1970-Oct-21 01:08:51.385554]: toolhead unpausing [1970-Oct-21 01:08:51.387418]: quack pause: false [1970-Oct-21 01:08:51.504254]: Expend Buffer: true [1970-Oct-21 01:08:51.609786]: Last sync period had (0,126,1779) buffer fulls due to suspend moves [1970-Oct-21 01:08:51.611990]: Syncing turned false [1970-Oct-21 01:08:51.698054]: Toolhead 0 ADC Error: 0 [1970-Oct-21 01:08:51.738941]: GAP: Query->Await [1970-Oct-21 01:08:51.773113]: TH0: Retreived step position 13828367 [1970-Oct-21 01:08:51.812715]: wait for PRU status in get position [1970-Oct-21 01:08:51.814415]: wait for PRU status in get position [1970-Oct-21 01:08:51.816058]: GAP: Await->Done(Query) [1970-Oct-21 01:08:51.925735]: Suspend [1970-Oct-21 01:08:51.927494]: Suspend index 12 found, A-pos 27.8069 [1970-Oct-21 01:08:52.765962]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:08:56.901191]: GAP: Query->Await [1970-Oct-21 01:08:56.942893]: TH0: Retreived step position 13959439 [1970-Oct-21 01:08:57.064159]: wait for PRU status in get position [1970-Oct-21 01:08:57.065971]: wait for PRU status in get position [1970-Oct-21 01:08:57.067607]: GAP: Await->Done(Query) [1970-Oct-21 01:08:57.816380]: Heater manager Set Target Temperature to 215, index 0 [1970-Oct-21 01:08:57.818231]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:08:58.337249]: wait for heaters at target, wait bitmask 0x1 [1970-Oct-21 01:09:02.295854]: Expend Buffer: false [1970-Oct-21 01:09:02.359536]: Syncing turned true [1970-Oct-21 01:09:02.399396]: PRU Event: PRU_SYNC_ON(7) [1970-Oct-21 01:09:02.401355]: PRU Event: PRU_SYNC_DELAY(6) [1970-Oct-21 01:09:02.622702]: Toolhead 0 ADC Error: 1 [1970-Oct-21 01:09:03.689565]: PRU Event: PRU_SYNC_DELAY(5) [1970-Oct-21 01:09:03.691497]: PRU Event: PRU_SYNC_DELAY(4) [1970-Oct-21 01:09:03.693223]: PRU Event: PRU_SYNC_DELAY(3) [1970-Oct-21 01:09:03.694890]: PRU Event: PRU_SYNC_DELAY(2) [1970-Oct-21 01:09:03.696670]: PRU Event: PRU_SYNC_DELAY(1) [1970-Oct-21 01:09:03.698334]: PRU Event: PRU_SYNC_DELAY(0) [1970-Oct-21 01:09:04.803978]: Expend Buffer: false [1970-Oct-21 01:09:19.853850]: Toolhead 0 state error: 81 [1970-Oct-21 01:09:21.385619]: toolhead pausing [1970-Oct-21 01:09:21.387350]: Toolhead 0 : Retry: Waited 1.53173s from state change [1970-Oct-21 01:09:21.392066]: Last sync period had (0,129,1770) buffer fulls due to suspend moves [1970-Oct-21 01:09:21.393832]: Syncing turned false [1970-Oct-21 01:09:21.395550]: quack pause: true [1970-Oct-21 01:09:21.455086]: PRU Event: PRU_SYNC_OFF(0) [1970-Oct-21 01:09:21.511183]: axis running: 0 [1970-Oct-21 01:09:21.671893]: axis running: 0 [1970-Oct-21 01:09:21.733729]: axis running: 0 [1970-Oct-21 01:09:21.761077]: Toolhead 0 state error: 0 [1970-Oct-21 01:09:21.794059]: axis running: 0 [1970-Oct-21 01:09:21.849580]: axis running: 0 [1970-Oct-21 01:09:21.923748]: axis running: 0 [1970-Oct-21 01:09:22.002158]: axis running: 0 [1970-Oct-21 01:09:22.057913]: axis running: 0 [1970-Oct-21 01:09:22.300824]: Last sync period had (0,129,1770) buffer fulls due to suspend moves [1970-Oct-21 01:09:22.303235]: Libstepper All Axis Abort [1970-Oct-21 01:09:22.304963]: Clear Toolhead Buffer [1970-Oct-21 01:09:22.332710]: clear toolhead buffer acknowledged [1970-Oct-21 01:09:22.427349]: toolhead unpausing [1970-Oct-21 01:09:22.429042]: quack pause: false [1970-Oct-21 01:09:22.549892]: Expend Buffer: true [1970-Oct-21 01:09:22.620881]: Last sync period had (0,129,1785) buffer fulls due to suspend moves [1970-Oct-21 01:09:22.622724]: Syncing turned false [1970-Oct-21 01:09:22.709090]: Toolhead 0 ADC Error: 0 [1970-Oct-21 01:09:22.749839]: GAP: Query->Await [1970-Oct-21 01:09:22.785472]: TH0: Retreived step position 14287119 [1970-Oct-21 01:09:22.868866]: wait for PRU status in get position [1970-Oct-21 01:09:22.880890]: wait for PRU status in get position [1970-Oct-21 01:09:22.882693]: GAP: Await->Done(Query) [1970-Oct-21 01:09:23.052464]: Suspend [1970-Oct-21 01:09:23.054204]: Suspend index 14 found, A-pos 41.5187 [1970-Oct-21 01:09:23.462103]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Oct-21 01:09:27.473277]: GAP: Query->Await [1970-Oct-21 01:09:27.493655]: TH0: Retreived step position 14221583 [1970-Oct-21 01:09:27.536202]: wait for PRU status in get position [1970-Oct-21 01:09:27.537878]: wait for PRU status in get position [1970-Oct-21 01:09:27.539567]: GAP: Await->Done(Query) [1970-Oct-21 01:10:42.364053]: toolhead pausing [1970-Oct-21 01:10:42.373419]: Last sync period had (0,129,3009) buffer fulls due to suspend moves [1970-Oct-21 01:10:42.375245]: Syncing turned false [1970-Oct-21 01:10:42.376908]: quack pause: true [1970-Oct-21 01:10:42.641595]: Last sync period had (0,129,3018) buffer fulls due to suspend moves [1970-Oct-21 01:10:42.643592]: Libstepper All Axis Abort [1970-Oct-21 01:10:42.645310]: Clear Toolhead Buffer [1970-Oct-21 01:10:42.683236]: clear toolhead buffer acknowledged [1970-Oct-21 01:10:42.766098]: toolhead unpausing [1970-Oct-21 01:10:42.767782]: quack pause: false [1970-Oct-21 01:10:42.887516]: Expend Buffer: true [1970-Oct-21 01:10:42.939686]: Last sync period had (0,129,3033) buffer fulls due to suspend moves [1970-Oct-21 01:10:42.941752]: Syncing turned false [1970-Oct-21 01:10:43.098087]: GAP: Query->Await [1970-Oct-21 01:10:43.135583]: TH0: Retreived step position 14024975 [1970-Oct-21 01:10:43.174134]: wait for PRU status in get position [1970-Oct-21 01:10:43.175815]: wait for PRU status in get position [1970-Oct-21 01:10:43.177452]: GAP: Await->Done(Query) [1970-Oct-21 01:10:43.353395]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 01:10:43.361529]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:10:44.166958]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:10:51.176262]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Oct-21 01:10:52.430409]: Last sync period had (0,129,3504) buffer fulls due to suspend moves [1970-Oct-21 01:10:52.433010]: Syncing turned false [1970-Oct-21 01:10:52.434768]: TH0: 93 failures in last 3128 packets (2.97315%) [1970-Oct-21 01:10:52.436681]: Toolhead Abort [1970-Oct-21 01:10:52.438372]: aborting pru with shutdown=true [1970-Oct-21 01:10:52.451448]: Last sync period had (0,129,3504) buffer fulls due to suspend moves [1970-Oct-21 01:10:52.453343]: Libstepper All Axis Abort [1970-Oct-21 01:10:52.454958]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 01:10:52.456643]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:10:52.570795]: Heater manager Set Target Temperature to 0, index 0 [1970-Oct-21 01:10:52.572561]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Oct-21 01:10:52.683626]: Commanding stats update: Retract count: 2273394512 [1970-Oct-21 01:10:52.685484]: Toolhead 0 marked as possibly blocking! [1970-Oct-21 01:10:52.837222]: Toolhead 0 done blocking! [1970-Oct-21 01:10:52.998841]: GetToolUsageStats called in machine state 0 [1970-Oct-21 01:10:53.005418]: Commanding tool usage stat retrieve [1970-Oct-21 01:10:53.007083]: GetToolUsageState: Proceeds to 1 [1970-Oct-21 01:10:53.009479]: GetToolUsagState: Error from retrieve: 0x10a [1970-Oct-21 01:10:53.042507]: Raw usage stats: retract 251821724ct, extrusion 139580261 steps, 648779 seconds, refurbed 0 times [1970-Oct-21 01:10:53.083330]: GetToolUsageStats called in machine state 1 [1970-Oct-21 01:10:53.085075]: VerifyToolUsageStatsRetrieved: Done [1970-Oct-21 01:10:53.086819]: GetToolUsageState: Proceeds to 2 [1970-Oct-21 01:10:53.191661]: GetToolUsageStats called in machine state 2 [1970-Oct-21 01:10:53.193403]: GetToolUsageState: Done, resets